Crystal Image Technologies RMP-161-4K17 User manual

User Manual
7U 17.3 inch Rack Mount Display Monitor
Options :
- DC 9~36V power input
- Touchscreen
Rack Mount Display Monitor - 4K
RMP-161-4K17
- AR hardness glass

< Part. 3 > Options
3.1
Touchscreen
P.7
< Part. 2 > Specifications / OSD
2.1 Product Specifi cations
2.2 On-screen Display Operation ( OSD )
P.4 - 5
P.6
< Part. 1 >
1.1 Package Content
1.2 Structure Diagram & Dimension
1.3 Installation
Contents
P. 1
P.1 - 2
RMB-17W-4K

■ It is very important to mount the equipment in a suitable cabinet or on a stable surface.
■ Make sure the place has a good ventilation, is out of direct sunlight, away from sources of excessive
dust, dirt, heat, water, moisture and vibration.
The equipment comes with the standard parts shown in package content. Check and make sure they are
included and in good condition. If anything is missing, or damaged, contact the supplier immediately.
Unpacking
Before Installation
How To Clean Your LCD Monitor
Caution :
■ To avoid the risk of electric shock, make sure your hands are dry before unplugging your monitor from or
plugging your monitor into an electrical outlet.
■ When you clean your monitor, do not press down on the LCD screen. Pressing down on the screen can
scratch or damage your display. Pressure damage is not covered under warranty.
■ Use only cleansers made specifi cally for cleaning monitors and monitor screens. Cleansers not made to
clean monitors and monitor screens can scratch the LCD display or strip off the fi nish.
■ Do not spray any kind of liquid directly onto the screen or case of your monitor. Spraying liquids directly
onto the screen or case can cause damage which is not covered under warranty.
■ Do not use paper towels or abrasive pads to clean your monitor. Using an abrasive pad or any wood based
paper product such as paper towels can scratch your LCD screen.
Cleaning Your Monitor
To clean your LCD safely, please follow these steps :
Disconnect the power cord.
Gently wipe the surface using a clean, dry microfi ber cloth. Use as little pressure as possible.
1
2
Cleaning Tough Marks and Smudges
To remove tough marks and smudges, please follow these steps :
Disconnect the power cord.
Spray a small amount of non-abrasive cleanser on a microfi ber cloth.
Gently wipe the surface. Use as little pressure as possible.
Wait until your monitor is completely dry before plugging it in and powering it up.
1
2
Caution : Do not spray or apply any liquids directly onto the monitor. Always apply the solution to your
microfiber cloth first, not directly on the parts you are cleaning.
3
4

< 1.1 > Package Content
P. 1
< Part 1 >
Rack mount monitor unit X 1
- 1.8 M Display port cable X 1
- Power cord X 1
< 1.2 > Structure Diagram
- 1.8 M HDMI cable X 1
Front view
Basic I/O : HDMI + Display port
Options : Touchscreen & DC power
2
1
3
1 LCD PANEL
2 LCD OSD
3 Handle
4Mounting bracket
I/O bracket
3
5

< 1.2 > Dimension
P. 2
Model Product Dimension
(W x D x H) Packing Dimension (W x D x H) Net Weight Gross Weight
482 x 62 x 310 mm 620 x 210 x 400 mm 7 kg 9 kg
RMP-161-4K17

P.3
< 1.3 > Rack Mounting Installation
1
Mount the RMP-161-4K17 display panel with M6 screw set
Step
M6 screw sets are not provided.
4 x M6 screw set are required
2
Step
90° tilt adjustment while mounted in rack: +45°~-45°

LCD
Panel Manufacturer
Panel Size ( diagonal ) 17.3 inch widescreen
Display pixel ( dots x lines )
Brightness ( typ. ) 400
Contrast Ratio ( typ.)
Color
Viewing Angle ( H/V )
Response Time ( ms )
Dot pitch ( mm )
Backlight Type LED
Power Power Supply Range Auto-sensing 100 to 240VAC,
50 / 60Hz
< 2.1 > Product Specifications
P.4
< Part 2 > RMP-161-4K17
Regulatory Safety FCC & Certified
Environmental RoHS2 & REACH compliant
AUO
1000:1
3840 x 2160 / 1920 x 1200 / 1920 x 1080
16.7M
178/178
16
0.0995(H) x 0.0995(V)
Video Digital Display port DP 1.2 / HDCP 1.3
HDMI HDMI 2.0 / HDCP 2.2
Environmental
Conditions Operating Temperature 0 to 50°C degree
Humidity 5~95%, non-condensing
Altitude 16,000 ft
Storage / Non-operating Temperature -20 to 60°C degree
Humidity 5~90%, non-condensing
Altitude 40,000 ft
Shock 15G acceleration (11ms duration)
Vibration 5~500Hz 1G RMS random
Physical
Specification Product ( W x D x H )
Packing ( W x D x H )
Net Weight
Gross Weight
482 x 62 x 310 mm
620 x 210 x 400 mm
7 kg
9 kg

P.5
Applicable
Format Display Port Input PC Signal 3840 x 2160 x 60Hz
1920 x 1080 x 60Hz
1600 x 1200 x 60Hz
1360 x 768 x 60Hz
1280 x 1024 x 60 / 75Hz
1280 x 768 x 60Hz
1024 x 768 x 60 / 70 / 75Hz
800 x 600 x 60 / 72 / 75Hz
720 x 400 x 70Hz
640 x 480 x 60 / 72 / 75Hz
Audio Signal 2ch Linear PCM
HDMI Input HDMI 2.0 3840 x 2160 x 60Hz
HDMI 2.0 / 1.4 3840 x 2160 x 30Hz
1920 x 1080 x 50 / 60Hz ( 1080p )
1920 x 1080 x 25 / 30Hz ( 1080i )
1280 x 720 x 50 / 60Hz ( 720p )
720 x 480 x 50 / 60Hz ( 576p / 480p )
Audio Signal 2ch Linear PCM

P.6
< 2.2 > On-screen Display Operation ( OSD )
Source
Menu/Enter
Video input selection

■ USB touchscreen package includes 2 x 1.8 M USB cable, quick reference guideline and CD disc
■ For detailed information, please refer to the attached CD disc
■ As the touchscreen unit is not made of toughened glass, please handle it carefully
< 3.1 > Options : Touchscreen
Model TRB e-Resistive TCB e-Capacitive
Technology 5-Wire Resistive Capacitive
Touch Point Single Single
Method Stylus or Finger Finger
Activation Force ≤ 50g / Stylus=R0.8 ≤ 50g
Durability 10 million touches 300 million touches
Response Time 15 ms 20 ms
Optical Transmittance 80% ± 3% 87% ±2%
Surface Hardness 3H 9H
Haze 8% ± 3% 7%
Glass 3.2 ±0.2 mm 2.8 mm ±10%
Connector USB Type A
Compatibility Windows 7 / XP / Vista, Linux
P.7
F21" USB Touchscreen Specification
< Part 3 >