Crystorama Farris FAR-6005-AG User manual

All electrical components must be
installed by a licensed electrician
in accordance with the National
Electric Code and the appropriate
local electrical codes.
®
ASSEMBLY INSTRUCTION MODEL #FAR-6005-AG
WARNING: This product can expose you to Lead,
which is known to the State of California to cause cancer
and/or birth defects or reproductive harm. For more
information go to www.P65Warnings.ca.gov
You will need 4-Cand Bulb
40 Watts Recommended 60 Watts Max
Bulb not included
USELEDBULBSFOREXTENDEDUSE
ThisfixtureisDamprated
How to Install
6.8"
21.3"
4"
6.8"
4.Install the recommended bulbs (not included)
into each socket.
5.Insert the glass rod into the slots on the frame.
1.Place the mounting plate over the outlet box and
mark the 4 points on the wall surface at the center
of 4 holes on the mounting plate.
2.Drill 4 holes at the marked points and insert
the wall anchors.
3.Attach the mounting plate over the outlet box
using two outlet box screws. Insert the anchor
screws into the wall anchors to tighten it.
Crystorama.com

Part Number
Part Numbers
PART NUMBER MODEL #FAR-6005-AG
A.Mounting Hardware
(2)Wire Nut
(4)Wall anchor
(4)Anchor screw
(6)Screws
(1)Mounting Plate
(1)Green Ground Screw
B.(1)Back plate;21.3″x4″x0.7h;XMO6005AGBKP21.3IN
AB
CD
F
C.(4)Socket
D.(2)Metal rod
E.(1)Frame
F.(13)Glass rod;1.5"Wx4"H;XMO6000GLAROD4IN
Ø1.5"
4"
Glass rod
E
Crystorama.com