CTA PAD-ASCS10W User manual

Anti-Theft Security Case with Stand
PAD-ASCS10W
INSTRUCTION - MANUAL
CONTENTS:
INSTALLATION:
888-733-4448
1. How to Open/Close Holder and Insert Tablet
A
A
1A.Locate at the bottom of the case (A) the open/close component and
slide outwards to open up the case.
1B.Slide in your tablet device.Then, slide back inwards the open/close
component to close off the case (A).
x1
B
x1
Ax1 C
x2
D
x4
E
**Tablet shown for
illustration and
NOT INCLUDED.

888-733-4448
2. How to Setup Anti-Theft Security Cable
C
CD
BE
2A.Anchor the one end of the cable lock (C) by looping it around an
immovable object.
2B. With the side of the cable lock (C), find the slot hole on the perimeter of
the open/close component of the case (A) and insert. Turn the key (D) to
lock and the opposite direction to unlock to the case (A).
**Tablet shown for
illustration and
NOT INCLUDED.
**Tablet shown for
illustration and
NOT INCLUDED.
Then, tighten arm brackets to snugly hold the
tablet in place.
If using smaller tablets, insert the L-shaped adapter
(B) into the left side of the opened tablet enclosure.
Setting up for Smaller
Tablet Devices
**Tablet shown for
illustration and
NOT INCLUDED.
180° tilting capability. Adjust the joint rotation to
the prefered angle.
360° case rotation capability. Adjust the orientation
to the prefered view.
Stand
Adjustability
**Tablet shown for
illustration and
NOT INCLUDED.
**Tablet shown for
illustration and
NOT INCLUDED.
**Tablet shown for
illustration and
NOT INCLUDED.
**Tablet shown for
illustration and
NOT INCLUDED.
360°
180°
(Optional) Anchoring
Base to Surface
Using the provided component (E), securely fasten
the base into the surface.
cable
collection
WARNING
While rotating
the tablet, be
careful of
entwined
cables.