CTA PAD-DSGK User manual

Dual Security Gooseneck Kiosk Stand with Locking Case
and Anti-Theft Cable
for iPad 5th-6th Gen., iPad Air, and iPad Pro 9.7
INSTRUCTION MANUAL
PAD-DSGK
Package Contents
(2) Nuts with bolts (2)Screws
Case Connector
Case
Lock
Gooseneck
Base
Key
For iPad Air 2 and
iPad Pro 9.7, use
included adhesive
pads inside case for
a snug fit.
Keep charge cable
slack neatly
organized in
bottom of case,
and route through
rubber cutout.
Use included metal insert piece to
block home button access.
[email protected]

Assemble the Stand
1) Align gooseneck screw holes with holes on stand base, then use Allen key to screw hex screws
into the gooseneck.
2) Attach case to gooseneck, align the screw hole with the marker line on the case connector,
then use the Allen key to tighten the hex screw inside the keyhole at the top of the gooseneck.
Inserting Your Tablet
1) Insert key and turn counter clockwise to unlock. Consult front page to determine
if you need to attach adhesive foam pads.
2) Close case door and turn key clockwise to lock. .
Anti-Theft Cable
Using the Cable Management System
iPad
Turn to lock
Locking at the base
Locking at the case
1) Thread charge cable with
small head rst through the
bottom of the base into the
bottom of the gooseneck.
2) Pull through the top then
attach gooseneck to case.
Route cable and slack through
rubberized cutout hole in case.
3) Attach cable protector
to the slack at the bottom.
Slide up to the base.
Case door
Case tray
Marker Line
Allen key
Screw hole
[email protected]
Allen key