CTM LYNG 5648533 Guide

ON
OFF
On/Off switch, wireless
165
INSTALLATION
CTM Lyng AS is Norway’s leading manufacturer
and supplier of security products for the home,
assistive technology, energy efficiency, and light
and heating control for all building types under the
mKomfy®, mTouch®, Microsafe®and Centrol®brands.
Wedistribute our products through wholesalers.
Weoffer everything from product
development to production and distribution.
Our production facility in Vanvikan is equipped with
some of the most advanced machinery in Europe.
Verkstedvegen 19, 7125 Vanvikan, Norway
Tel: [phone]
Email: [e-mail]
Thank you for choosing a product from CTM Lyng AS
For more information, visit us at
www.ctmlyng.com
Installation and user instructions
0320 Art. No.: 12644_EN
Technical data
Dimensions:
Conforms to RS16
IP Code:
20
Battery:
CR2032
Battery life:
5 years in
normaluse
RF:
868.100 MHz +5 dBm
Compatible with “v2”
equipment, see page 2
RF range:
30 metres
NB: It is best to carry out pairing and test the On/
Off switch before installation.
Mount the switch directly on the wall or on the
outside of a standard wall box.
DIPSW
Back of On/Off switch
TIP: Program all the units in a system before
mounting. This will make it easier to test
theequipment.
No. 5648533 / 6251647
ANNUAL END USER TEST
The system owner/user must familiarise themselves with the
accompanying Installation and User Instructions at installation,
andis under an obligation to test that installed equipment shuts off
thewater supply as required in the Norwegian Insurance Approval
Board (FG) test.
Function testing must be performed at least twice a year in
accordance with the Installation and User Instructions for sensors
and switch panels.
DIP 1 – not in use
DIP 2 – not in use
DIP 3 – Master switch function/Lock function:
If DIP3=ON, only this switch panel can turn paired
products back on if they have been turned off with
this switch panel. Factory setting = OFF.
DIP 4 – not in use

432
USER INFORMATION CHANGING THE BATTERY
The On/Off Switch.is a security product from CTM
Lyng AS.
The switch controls the power supply to sockets
it is paired with, and, where appropriate, the water
supply to the dwelling, individual
rooms and relevant consumer
electronics/appliances.
Compatible with newer
“R” / ”Radio” products, e.g.:
• mKomfy cooker guards
• Mstikk sockets
• Aqua Xpress valve drivers
The system is flexible, and can be expanded to
accommodate different needs and security levels.
PAIRING
1. Activate pairing mode in the product that
is to be paired with the On/Off switch.
2. To send a pairing signal from the On/
Off switch, briefly press SW4 on the
back of the product. A red LED lights up
duringpairing.
3. Test whether pairing has been successful
by operating the On/Off switch.
Back of On/Off switch
Back of On/Off switch
SW4
The battery (CR2032) will need changing
approximately every 5 years in normal use.
1. Lever the front off with
a small screwdriver.
2. Slide the old battery out
and insert a new one.
EVERYDAY USE
Lock function
The lock function can be activated by setting DIP3
to ON (see page 5).
If a valve or socket is turned off with the On/Off
switch when the lock function is activated, it will
have to be turned on again with the same On/Off
switch in order to work.
Look for products
labelled “v2”
Press to turn ON
Press to turn OFF
TESTING COMMUNICATION
To test communication between the On/Off
switch and socket/valve driver, briefly press the
button on the On/Off switch.
The blue radio communication LED in the
socket/valve driver will flash to acknowledge
every press of the button.