CTX P922E User manual

P922E
SERVICE MANUAL
The Monitor S
p
ecialists EDITION 1
FEB. 2003

C
C
CT
T
TX
X
X
Service Manual
P922E
2
TABLE OF CONTENTS
CONTENTS PAGE
Sections
1. Scope 4
2. Input requirements 5~ 6
3. Electrical Characteristics 6~13
4.Trouble Shooting 14~15
5.System Block Diagram 16~17
6. Inverter Board I/O Connection 17
7. IC Pin Configuration 18~21
8.PinAssignment 22~32
9. Parts List 33
Appendix
1. Main Board Circuit Diagram
2. Assembly Explosion Drawing

C
C
CT
T
TX
X
X
Service Manual
P922E
3
Copyright © 2002 by Chuntex Electronic Co., Ltd.
The CTX SERVICE MANUAL is published by Chuntex Electronic Co., Ltd
All rights reserved. No part of this manual may be used, copied, reproduced, or transmitted in any form or by any
means for any purpose without the express written permission of the publisher.
The publisher has been trying its best to make this publication perfect, and in this manner takes no responsibility for
the use of any of the materials or methods described in this manual, or for the products thereof. Neither will the
publisher be responsible for any damages caused by misuse or misquotation.
Information in this manual is subject to change by the publisher without any notice in advance.
CTX is a registered trademark of Chuntex Electronic Co., Ltd.

C
C
CT
T
TX
X
X
Service Manual
P922E
4
1. SCOPE
This specification defines the design and performance requirements for the 19” SXGA TFT
LCD display monitor “P922E “ series.
There are two models of “P922E” in each own’s project code.
The common features of the “P922E” is listed in the following table :
Feature Description
1 Universal input AC/DC Adaptor
2 Digital Visual interface (DVI-D) TMDS 1 Ch 165MHz
3 Analog RGB interface (VGA ) 30~92KHz, 59~85Hz, 157.5MHz
4 USB 2.0 module (provided 4 downstraem ports)
5 Built in 1W*2 (L/R) speakers (Stereo)
6 19” SXGA 1280*1024 Patterned Vertical Alignment (PVA), TFT LCD panel
7
Function keys
*
6 : Power On/Off ESC
△
(up)
▽
(down) (enter) source
8 Direct Acess function keys : △ for contrast function, ▽for brightness function, “Esc”
for mute function
9 Green/Amber LED indicator for power on/power saving
10 Plug & play support with DDC2B protocol installed.
11 Power saving mode compliant with Energy Star
12 OSD (on screen display) MENU operation
12.1 Brightness adjustment
12.2 Contrast adjustment
12.3 Auto tune function (VGA)
12.4 Color selection
12.5 Image adjustment
12.6 Position adjustment (VGA)
12.7 Language selection
12.8 Reset function
12.9 Source selection (DVI/VGA)
13 OSD information of input status
14 Left side Dial volume control
15
ISO/FDIS
13406
-
2Class
Ⅱ
16 Tilt (in front bezel) and Swivel (in base) adjustable.
17 Cable wire arrange box
The differential features of the 2 models of P922E are listed in the following table
P922E
(ISO13406-2 Class Ⅱ)
P922E
ISO13406-2 Class Ⅱ
+ 0 Pixel Fault
Model
project
Feature LKC19SS2BC03 LKC19SS0BC03
View Direction Class ⅡⅡ
ISO13406-2 Pixel Faults Class ⅡⅠ

C
C
CT
T
TX
X
X
Service Manual
P922E
5
2. INPUT REQUIREMENTS
2.1 Input Power
2.1.1. Power Source
2.1.2. Power Consumption
2.1.3. AC Line Drop Out
2.1.4. AC Wave Distortion
2.1.5. In-rush Current
2.1.6. Power Cord
2.1.7 DC Power cable
100 ~ 240 Vac, + -10%, 50/60 Hz (60W,3.0ψplug to
monitor.)
Picture must not disappear while AC 100 V input drop out
(10ms, 100%)
10% max. permitted
50 A max at 240 Vac cold start
Detachable, 3P with ground type.
Detachable from display unit and captive with AC/DC
adapter.
2.2 Display Input
2.2.1. RGB Video
2.2.2 Sync Signal
Analogue, 0.0 to 0.7 V peak to peak
Separate RGB
Input impedance 75 Ohm
Positive polarity
Separate horizontal & vertical sync (3.3V & 5V)
Low level 0.8 V maximum
High level 2.0 V minimum
Positive or negative polarity
2.2.3 Analog Input Connection a. Detachable Mini D-sub 15 pin male in two ends signal
cable.
Normal operating
mode
1.Audio function and USB 2.0 module are operating at full
power
2.USB 2.0 module all ports aren’t connected to any device,
and the audio module is operating at full power.
3. USB 2.0 module all ports aren’t connected to any
device,and
the audio function is operating at no audio signal input.
≦
57W
≦
42W
≦
Power saving
mode
1.USB 2.0 module is operating at full power, the
number of active Ports is 4 with 0.5A per port. Audio
function is operating at full power.
2.USB 2.0 module all ports aren’t connected to any
device, audio function is operating at full power.
3.USB 2.0 module all ports aren’t connected to any
device, audio function is operating at no audio signal
input.
≦
22W
≦9W
≦5W
Power switch off
1. USB 2.0 module u
p
stream
p
ort isn’t connected to PC or PC off.
≦
2W

C
C
CT
T
TX
X
X
Service Manual
P922E
6
b. A female Mini D-sub 15 pin base .
Pin 1 Red
Pin 2 Green
Pin 3 Blue
Pin 4 Ground
Pin 5 Ground
Pin 6 R Return
Pin 7 G Return
Pin 8 B Return
Pin 9 No Connection
Pin 10 Ground
Pin 11 No Connection
Pin 12 SDA
Pin 13 H. Sync &
Composite
sync
Pin 14 V. Sync
Pin 15 SCL
2.2.4 Digital Input
Input Interface DVI-D V.1 TMDS 165MHz 1-Channel
Digital Input connection a. Detachable DVI-D male connector in two ends
signal cable
b. A female DVI-D connector in monitor side.
2.3 Audio Input
2.3.1 Audio Input Signal Right & Left channels.
Input level : 1Vrms(typ)
Input Impedance : 15 Kohm
2.3.2. Audio Input Connection a. Detachable stereo phone head in two ends signal
cable.
b. A femal stereo phone jack base.
2.4 USB Input USBRev.2.0
2.4.1 USB Input signal Differential signal D+,D-
2.4.2 USB Input connection a. Detachable standard USB cable (2.0)
b.AfemalestandardUSBup-streamportbase.
2.4.3 USB Output Connection Four female USB down-stream port bases.
DVI-D 1-Channel Pin Assignment
Pin Signal Assignment Pin Signal Assignment Pin Signal Assignment
1 T.M.D.S Data 2- 9 T.M.D.S Data 1- 17 T.M.D.S Data 0-
2 T.M.D.S Data 2+ 10 T.M.D.S Data 1+ 18 T.M.D.S Data 0+
3 T.M.D.S Data 2 Shield 11 T.M.D.S Data 1 Shield 19 T.M.D.S Data 0 Shield
4 NC 12 NC 20 NC
5 NC 13 NC 21 NC
6 DDC Clock 14 +5V Power 22 T.M.D.S. Clock Shield
7 DDC Data 15 Ground 23 T.M.D.S. Clock+
8 NC 16 Hot Plug Detect 24 T.M.D.S. Clock-

C
C
CT
T
TX
X
X
Service Manual
P922E
7
3. ELECTRICAL CHARACTERISTICS
3.1 LCD Panel
3.1.1. Type 19” diagonal, SXGA resolution, color TFT-LCD
3.1.2. Pixel structure
R/G/B sub-pixels in vertical stripes
1280 x 1024 array matrix
a-Si TFT active matrix (PVA)
3.1.3. Gray scale 16.7 million colors.
3.1.4. Surface treatment 3H hard coating ,anti-static,anti-glare
3.1.5. Backlight
3.1.6 Pixel Faults
Integral CCFT ,
Type to support field replacement.
Life time 30000 hours @ 25C, 50% of initial
value.
Model
Pixel Faults type
P922E
(ISO13406-2
Class Ⅱ)
P922E
(ISO13406-2
Class Ⅱ
+ 0 pixel Fault) (Note 1)
Type1 Bright Pixels (Note 2)
≦
3
0
Type2 Dark Pixels (Note 3)
≦
3
0
Type3 Fault Pixels / Sub-Pixels(Note 4)
≦
5
0
Type4 Cluster of type1 or type 2
≦
0
0
Type5 Cluster of type3 faults (Note5)
≦
3
0
Type6 Total Pixel Faults
≦
5
0
Note 1 : 0 pixel fault meets ISO/FDIS 13406-2 Pixel Faults Class I requirements.
Note 2 : Bright pixels in full black pattern.
Note 3 : Dark pixels in full white pattern
Note 4 : fault Pixel / Sub-Pixel : The pixel or sub-pixel is abnormal but not bright/dark pixel.
Note 5 : Fault Cluster : Two or more Pixels/Sub-pixels with faults within 5 * 5 block of pixels.
3.2 Modes and Timing Compability
The monitor shall support an internal scaler to enable the monitor to display
lower resolution video modes. The scaler shall convert all lower resolution
modes up to 1280x1024. The monitor shall support all the modes listed in
Table 1.
3.2.1 Analog
Table 1. Supported Timing

C
C
CT
T
TX
X
X
Service Manual
P922E
8
VESA Standard mode :
Display Format IBM VGA VESA VESA VESA VESA VESA
Horizontal Dots 720 640 640 640 800 800 800
Vertical lines 400 480 480 480 600 600 600
Horizontal Frequency ( KHz) 31.469 37.861 37.5 37.879 48.077 46.875
Vertical Frequency ( Hz ) 70 59.94 72.809 75 60.317 72.188 75.000
Pixel Rate ( MHz ) 28.322 25.175 31.5 31.5 40 50 49.5
H. Sync. Polarity - - - - + + +
A μS ( Period ) 31.778 26.413 26.667 26.4 20.8 21.333
B μS ( Pulse Width ) 3.813 1.270 2.032 3.2 2.4 1.616
C μS ( Back Porch ) 1.907 4.063 3.810 2.2 1.28 3.232
D μS ( Active Area ) 25.422 20.317 20.317 20.0 16.0 16.162
E μS (Front Porch ) 0.636 0.763 0.508 1.00 1.12 0.323
V. Sync. Polarity + - - - + + +
O ms ( Period ) 16.683 13.735 13.333 16.579 13.853 13.333
P ms ( Pulse Width ) 0.064 0.079 0.080 0.106 0.125 0.064
Q ms ( Back Porch ) 1.048 0.739 0.427 0.607 0.478 0.448
R ms ( Active Area ) 12.711 15.253 12.678 12.800 15.840 12.480 12.8
S ms ( Front Porch ) 0.318 0.237 0.027 0.026 0.770 0.021
Dis
p
la
y
Format VES
A
VESA VES
A
VESA VESA VES
A
Horizontal Dots 1024 1024 1024 1152 1280 1280
Vertical lines 768 768 768 864 1024 1024
Horizontal Fre
q
uenc
y
48.363 56.746 60.023 67.5 63.981 79.976
Vertical Fre
q
uenc
y
60.004 70.069 75.029 75 60.013 75.025
Pixel Rate
(
MHz
)
65.0 75 78.75 108 108 135
H. S
y
nc. Polarit
y
- - + + + +
A
μ
S
(Period)
20.667 17.707 16.660 14.815 15.631 12.504
B
μ
S
(PulseWidth)
2.092 1.813 1.219 1.185 1.180 1.067
C
μ
S
( Back Porch )
2.462 1.920 2.235 2.370 2.065 1.837
D
μ
S
(ActiveArea)
15.754 13.653 13.003 10.667 11.797 9.481
E
μ
S
(Front Porch )
0.369 0.321 0.203 0.593 0.590 0.119
V. S
y
nc. Polarit
y
- - + + + +
O ms
(
Period
)
16.666 14.272 13.238 13.333 16.663 13.329
P ms
(
Pulse Width
)
0.124 0.106 0.050 0.044 0.047 0.038
Q ms
(
Back Porch
)
0.6 0.513 0.466 0.474 0.594 0.475
R ms
(
Active Area
)
15.88 13.599 12.795 12.8 16.006 12.804
S ms ( Front Porch ) 0.062 0.054 0.017 0.015 0.016 0.012
VGA Support Mode
1280 * 1024 @ 70Hz,72Hz,85Hz
1280 * 960 @ 60Hz,70Hz,72Hz,75Hz,85Hz
1280 * 720 @ 60Hz
1152 * 864 @ 60Hz, 70Hz,72Hz,85Hz
1024 * 768 @ 72Hz,85Hz
800 * 600 @ 70Hz,85Hz
640 * 480 @ 70Hz,85Hz
640 * 350 @ 70Hz

C
C
CT
T
TX
X
X
Service Manual
P922E
9
Fig.1 Timing Chart
3.2.2Digital
3.3 Plug & Play
VESA DDC 2B, DVI support DDC 2B+ standard DDC 2B data transmission only for
I2C BUS interface card.
3.4 Scanning characteristics VGA DVI
Horizontalfrequency 30KHzto92KHz 30KHzto66KHz
Refreshrate 59Hzto85Hz 59Hzto61Hz
3.5 USB 2.0 Module
3.5.1 The USB 2.0 module provided for 4 down-stream ports and 1 up-stream port.
3.5.2 The USB 2.0 module can detect the status of computer (USB VBUS power) to save power.
DVI Support mode
640 * 480 @60Hz
800 * 600 @60Hz
1024*768 @60Hz
1280*1024@60Hz

C
C
CT
T
TX
X
X
Service Manual
P922E
10
3.5.3 Down-stream port output power : 5V±5% (> 4.75V, < 5.25V)
3.5.4 Overcurrent detection : 0.6 to 1.25A ( 0.9A typ.) (The USB
standard defines the max.current is 0.5A for each port)
3.5.5 Bus transation : High speed(480Mbps), full speed(12Mbps)
low speed(1.5Mbps)
3.6 Audio Function
3.6.1 Input Level : 1Vrms, 2.828Vpp(typ.)
3.6.2 Max. Output Level : 7.8Vpp, No distortion(Input level :3.76Vpp
max. volume)
3.6.3 Output Power : 1W * 2 (10% THD,1KHz)
3.6.4 Total Harmonic Distortion (THD) 0.3%(0.5W*2, 1KHz)
3.6.5 Frequency Response ±3dB : 330 ~ 20KHz

C
C
CT
T
TX
X
X
Service Manual
P922E
11
3.7 User Controls and Indicator
3.7.1 Power ON/OFF Switch
3.7.2 LED Indicator
3.7.3 OSD
3.7.3.1 Buttons
3.7.3.2 OSD Menu Level
3.7.4 Hot Keys Function
3.7.4.1 Contrast ( )
3.7.4.2 Brightness ( )
3.7.4.3 Mute On ( )
The switch control scaler power down and turn off panel.
All function will be disable, USB 2.0 module also.
The LED color shall indicate power status as shown in
paragraph 3.8
ESC ,▽, △, ,Signal source
See Table 2. P922E OSD Control Map
Press “△” to pop up ;then press “△” or “▽” to adjust
Contrast up or down.
Press “▽” to pop up ;then press “△” or “▽” to adjust
Brightness up or down.
Press “Esc” directly to disable speakers, while speaker in normal
state.
3.7.4.4 Mute Off ( )
Press “Esc” directly to enable speakers, while speaker in audio
mute state.
“Esc” key is for Mute On and Off function
3.7.4.5 Source Key Press “ Source” key to select VGA or DVI input.

C
C
CT
T
TX
X
X
Service Manual
P922E
12
Table 2 P922E OSD Control Map
1. VGA-D15 input
Level 1 Level 2 Level 3 Level 4
Detect Adj. Brightness
Detect Adj. Contrast
Audio Mute
Auto Tune Adjustment Scale
9300∘K
6500∘K
User R/G/B select Adjustment Scale
Color Adjustment Scale
Tint Adjustment Scale
Flesh Tone Adjustment Scale
(Y) Brightness Adjustment Scale
(Y) Contrast Adjustment Scale
Color
Moive
Reset
Auto Tune Adjustment Scale
Clock Adjustment Scale
Phase Adjustment Scale
Image
Smooth On/Off
H-Position Adjustment Scale
V-Position Adjustment Scale
Image Position
Center Adjustment Scale
H-Position Adjustment Scale
V-Position Adjustment Scale
Position
OSD Position
Center Adjustment Scale
English (select)
German (select)
French (select)
Spanish (select)
Italiano (select)
Language
中文 (option)
Reset Yes/No
Detect Adj.
Main Menu
Source DVI/VGA (select)

C
C
CT
T
TX
X
X
Service Manual
P922E
13
2.DVI input
Level 1 Level 2 Level 3 Level 4
Detect Adj. Brightness
Detect Adj. Contrast
Detect Adj. Audio Mute
9300∘K
6500∘K
User R/G/B select Adjustment Scale
Color Adjustment Scale
Tint Adjustment Scale
Flesh Tone Adjustment Scale
(Y) Brightness Adjustment Scale
(Y) Contrast Adjustment Scale
Color
Moive
Reset
Image Smooth On/Off
H-Position Adjustment Scale
V-Position Adjustment Scale
Position
OSD Position
Center Adjustment Scale
English (select)
German (select)
French (select)
Spanish (select)
Italiano (select)
Language
中文 (option)
Reset Yes/No
Main Menu
Source DVI/VGA (select)

C
C
CT
T
TX
X
X
Service Manual
P922E
14
3.7.5 Accessory OSD Indications
Signal out of range An input signal which is outside the range defined in
Section 3.4 shall cause the monitor to display a message
Signal Out of Range.
No Signal Input and power
down
When the signal cable is not plugged into PC or when the
horizontal or vertical sync are absent and when the
monitor is turned on. After 5 sec isn’t to detect H or V Sync
then show “No Signal Input” 3 sec, and then show ” Power
down” message on screen 2 sec.
If first turn on the monitor, shows “No Signal Input” 30 sec.
3.8 Power Management
This monitor will meet the low power specification, Including USA governmental
requirements
for Energy Star, the NUTEK standard and the VESA DPMS standard which
detected the Hori. /Vert. sync signal from host CPU.
A dual color (green/amber) LED is located on the front bezel to indicate the power
management states.
Sync Power consumption Power
management
Picture Recovery
time LED Color
On 57W max. ON - Green
Off ≦5W (Note 1) Off ≦3 sec Amber
Once “Esc” key initiates under power saving condition, the audio function can be
wokenup
and the power consumption can not be the above definition.
Note1 : USB 2.0 module under power saving mode (or all ports aren’t connected to
any device), audio function is operating at no audio signal input.

C
C
CT
T
TX
X
X
Service Manual
P922E
15
4. TROUBLE SHOOYING
VIDEO DOES NOT APPEAR

C
C
CT
T
TX
X
X
Service Manual
P922E
16
R.G.B is not displayed correctly

C
C
CT
T
TX
X
X
Service Manual
P922E
17
5. SYSTEM BLOCK DIAGRAM
MAIN SYSTEM

C
C
CT
T
TX
X
X
Service Manual
P922E
18
POWER SYSTEM
6. INVERTER BOARD I/O CONNECTIONS

C
C
CT
T
TX
X
X
Service Manual
P922E
19
7. IC Pin Configuration

C
C
CT
T
TX
X
X
Service Manual
P922E
20
Table of contents
Other CTX Monitor manuals