Cub Cadet 41AERE6C912 User manual

769-11170 / 00 10/15
Elite Standard Charger
CESC8000
Instruction Manual
PRODUCT SPECIFICATIONS
Use ONLY with Power Cell: CEC6600 40 Volt high energy Li-Ion
Charger: ELITE Standard Charger
Charger input: 100/240 V AC, 60/50 Hz
Charger output: 42V DC
Weight: 4.85 lb. 77.6 oz. (2.2 kg)
Need Assistance?
For assistance regarding the assembly, operation or maintenance
of the unit, please call 1-877-282-8684 (in the United States) or
1-800-668-1238 (in Canada). Additional information can be
found at www.cubcadet.com (in the United States) or
www.cubcadet.ca (in Canada).
BC

2
TABLE OF CONTENTS
Product specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Table of contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
General safety warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-4
Electrical safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Owner’s Registration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
General power tool safety warnings . . . . . . . . . . . . . . . . . . . . . . . . . 4-5
Work area safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Electrical safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-5
Personal safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Specific safety rules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-8
Charging the Power Cell . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-11
Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14-16
WARNING:
This ELITE Standard Charger can be used by children aged from 8 years
and above and persons with reduced physical, sensory or mental capabilities or
lack of experience and knowledge if they have been given supervision or
instruction concerning use of the ELITE Standard Charger in a safe way and
understand the hazards involved. Children shall not play with the ELITE
Standard Charger. Cleaning and user maintenance shall not be made by children
without supervision.

3
GENERAL SAFETY WARNINGS
This instruction manual includes the following:
• General Safety Rules
• Specific Safety Rules and Symbols
• Functional Description
• Assembly
• Operation
WARNING: Retain this manual for future reference.
Provide this manual to all operators and be certain that they have
read and understand all the Safety Rules and Operating Instructions prior
to their using this tool.
WARNING: To avoid electrical hazards, fire hazards or damage to
the tool, use proper circuit protection.
The charger for this tool is wired at the factory for 100/240 V AC 60/50Hz
operation. It must be connected to a 100/240 V AC 60/50Hz, 15 A circuit that is
protected by a time-delayed fuse or circuit breaker. If the supply cord is worn, cut
or damaged, it must be replaced immediately by the manufacturer, its service
agent or similarly qualified persons in order to avoid shock, fire or hazard.
ELECTRICAL SAFETY
Before using the ELITE Standard Charger, read this manual and all
instruction and cautionary markings on Power Cell charger, Power
Cell, and power tool and follow all Safety Rules and Operating Instructions.
CAUTION: To reduce the risk of fire or electric shock, carefully follow these
instructions, charge only Power Cell type CEC6600 manufactured by Cub
Cadet, other types of batteries may burst causing personal injury and damage.
SAVE THESE INSTRUCTIONS: this manual contains important safety and
operating instructions for Power Cell charger model CESC8000.

4
GENERAL SAFETY WARNINGS
GENERAL POWER TOOL SAFETY WARNINGS
GENERAL POWER TOOL SAFETY
WARNINGS
WARNING: Read all safety
warnings and all instructions. Failure
to follow the warnings and instructions
may result in electric shock, fire and/or
serious injury.
Save all warnings and instructions for
future reference.
General Power Tool Safety
Warnings – Work Area Safety
Keep work area clean and well lit.
Cluttered or dark areas invite accidents.
Do not operate power tools in
explosive atmospheres, such as in
the presence of flammable liquids,
gases or dust. Power tools create
sparks which may ignite the liquids,
fumes or dust.
Keep children and bystanders away
while operating a power tool.
Distractions can cause you to lose
control.
General Power Tool Safety
Warnings – Electrical Safety
Charger plugs must match the outlet.
Never modify the plug in any way. Do
not use any adapter plugs with
earthed (grounded) chargers.
Unmodified plugs and matching outlets
will reduce risk of electric shock.
Avoid body contact with earthed or
grounded surfaces such as pipes,
radiators, ranges and refrigerators.
There is an increased risk of electrical
shock if your body is earthed or
grounded.
Do not expose power tools, chargers
or Power Cells to rain or wet
conditions. Water entering the tool,
chargers or Power Cells will increase
the risk of electric shock.
Do not abuse the cord. Never use the
power cord for carrying, pulling or
unplugging the charger. Keep the
power cord away from heat, oil, sharp
edges, and moving parts. Damaged or
entangled cords increase the risk of
electric shock.
Please register your product online at www.cubcadet.com (in the United
States) or www.cubcadet.ca (in Canada).
OWNER’S REGISTRATION

5
GENERAL POWER TOOL SAFETY WARNINGS
When operating a charger outdoors,
use an extension cord suitable for
outdoor use. Use of a cord suitable for
outdoor use reduces the risk of electric
shock.
If operating a charger in a damp
location is unavoidable, use a
residual current device (RCD)
protected supply. An RCD is also
known as a ground fault circuit
interrupter (GFCI) or earth leakage
circuit breaker (ELCB). Use of an RCD
reduces the risk of electric shock.
General Power Tool Safety
Warnings – Personal Safety
Stay alert, be aware of your
surroundings, watch what you are
doing and use common sense when
operating a power tool. Do not use a
power tool while you are tired or
under the influence of drugs, alcohol,
or medication. A moment of inattention
while operating a power tool may result
in serious personal injury.
General Power Tool Safety
Warnings – Service
Have your power tool or charger
serviced by a qualified repair person
using only identical replacement
parts. This will ensure that the safety of
the power tool or charger is maintained.
SPECIFIC SAFETY RULES
WARNING: Only use a
CESC8000 standard charger to
charge the CEC6600 Power Cell.
Using any other chargers to charge
the CEC6600 Power Cell may damage
the Power Cell and / or the charger
and cause fires, explosion, hazardous
fumes and possibly burns or other
serious injury.
WARNING: Fire Hazard.
Do not store or carry the Power Cell in a
manner in which metal objects could
contact the exposed metal terminals.
Do not place the Power Cell in aprons,
pockets, drawers, tool boxes, etc. with
metal objects, such as, but not limited
to, loose nails, screws, bolts, keys,
coins, staples, foil, etc. Such metal
objects could cause the Power Cell to
short circuit causing fire, explosion, and
hazardous fumes, resulting in personal
injury or property damage.

6
SPECIFIC SAFETY RULES
Never attempt to open, modify,
dismantle, reverse polarity, crush,
puncture or shred the Power Cell for
any reason.
If the housing of the Power Cell breaks,
cracks, swells, or is punctured
immediately discontinue its use and do
not recharge.
Do not charge or use the Power Cell if it
has been dropped or has received a
sharp blow, a heavy weight has been
imposed upon it, has been overheated,
or is cracked, crushed, deformed or
punctured. If a Power Cell has sustained
damage, (as per above, or otherwise)
immediately isolate it in a non-
combustible, safe outside area, remain a
safe distance away but do not leave it
unattended. Such a damaged Power
Cell should be considered and treated
as a potentially thermally unstable,
flammable and hazardous material. If the
Power Cell ignites use water spray,
carbon dioxide, dry chemical or foam
extinguishers to suppress. Avoid
exposure to and inhalation of hazardous
fumes. Contact hazardous materials
authorities for guidance as to
appropriate handling and prompt safe
disposal of damaged Power Cells. Make
arrangements for prompt safe disposal
of a damaged Power Cell per local
hazardous material regulations.
Do not use or charge the Power Cell if it
is wet or shows any evidence of
corrosion.
WARNING: Leakage from the
Power Cell may occur under extreme
usage, charging or temperature
conditions, or if the Power Cell is
damaged, crushed or punctured. This
leakage indicates a failure of the Power
Cell and the Power Cell should be
properly disposed of per local
hazardous material regulations.
If this leakage gets on your skin, or eyes
follow these steps:
1. Wash skin immediately and
thoroughly with soap and water.
2. If liquid gets into your eyes, flush
immediately with clean water for a
minimum of 20 minutes and seek
immediate medical attention.
If the liquid gets onto your clothing or
shoes, remove, isolate and wash the
contaminated clothing thoroughly.
Do not wash, splash or immerse a
Power Cell in water or other liquids.
Keep the Power Cell out of the reach of
children and away from persons not
fully familiar with these instructions.
Do not expose the Power Cell to heat or
fire. Do not incinerate the Power Cell. It
can explode and emit hazardous fumes.
Do not store or use the Power Cell in
locations where the temperature may
reach or exceed 105°F (40°C) such as in
outside sheds or metal buildings, tool
boxes, vehicle interiors or trunks during
summer. Avoid storing the Power Cell in
direct sunlight.

7
SPECIFIC SAFETY RULES
For air, vessel and ground transport
purposes, Lithium ion Power Cells are
classified as Class 9 Hazardous Goods,
subject to ICAO Technical Instructions
and IATA Dangerous Goods Regulations
and US Department of Transportation
and Transport Canada Hazardous
Material Regulations [HMR] [and other
applicable national regulations]. Such
Power Cells are restricted from being
placed in checked in baggage and are
subject to shipper declarations,
standards, quantity and packaging
regulations. Confirm with the ground,
vessel, air cargo or passenger air travel
service provider as to the most current
regulations to determine if your lithium
ion Power Cells are prohibited, or
subject to restrictions or exemptions
prior to shipping or travel with your
lithium Power Cells.
Do not remove the Power Cell from its
original packaging until it is required for
use.
Always keep the Power Cell clean and
dry. Wipe the terminals with a clean dry
cloth if they become dirty.
Storage Recommendations:
The best storage place for Power Cells
is a secure and safe place that is cool
and dry and away from direct sunlight
and excess heat or cold. Exposure to
excess or prolonged heat will degrade
the performance and the life expectancy
of the Power Cell.
Do not use an extension cord. Plug the
charger cord directly into an electrical
outlet.
Use the charger only in a standard 100
or 240 V AC, 50/60 Hz electrical outlet.
Choose 115V AC or 230V AC by voltage
switch (1) on charger bottom.
WARNING: Do not use
the charger in wet or damp conditions.
The charger is intended for indoor use
only. Do not expose to dew, rain or
garden sprinklers, frost, or snow. Do not
use the charger near sinks or tubs. Do
not immerse the charger in water. Water
entering the chargers or Power Cells will
increase the risk of electric shock.
Do not operate chargers in explosive
atmospheres, such as in the presence
of flammable liquids, gases or dust.
Chargers can create sparks which may
ignite the liquids, fumes or dust.
Do not use the CESC8000 standard
charger to charge any batteries other
than a CEC6600 Power Cell. Charging
other batteries may cause the batteries
to burst, catch fire, emit hazardous
fumes or explode.

8
SPECIFIC SAFETY RULES
Do not allow the charger cord to hang
over the edge of a table or counter, to
be placed in an area where it can
become entangled with moving objects,
or be a tripping hazard, or to contact
sharp or hot surfaces. The charger
should be placed away from sinks and
hot surfaces.
Do not leave a Power Cell on a
prolonged charge. Remove the Power
Cell after attaining a complete recharge
and unplug the charger when not in
further use.
Do not operate the charger if the cord or
plug is damaged. Have a qualified
technician replace the damaged cord
and plug immediately.
Do not operate the charger if it has
received a sharp blow, been dropped,
crushed, cracked, punctured, immersed
or splashed with water or other liquids,
or otherwise damaged in any way. Have
a qualified technician examine the
charger and repair it if necessary. Do
not disassemble or modify the charger.
CAUTION: When the charger is
plugged into the power supply, it can
become shorted by foreign conductive
material and cause sparks or fires.
Foreign conductive material such as,
but not limited to, metal shavings /
chips, steel wool, aluminum foil, nails,
staples, paper clips, should be kept
away from charger ventilation openings,
Power Cell retaining cavity and output
terminals.
Do NOT charge the Power Cell when
the work area or the Power Cell
temperature is at or below 0° C (32° F)
or above 45° C (113° F).
Unplug the charger when it is not in use
and before cleaning or maintenance.
POWER CELL RECYCLING
To preserve our natural resources, and
reduce landfill please recycle your
Power Cells at participating retailers, or
dispose of Power Cells properly in
accordance with Federal, State,
Provincial or local laws.

9
ASSEMBLY AND OPERATING
CHARGING THE POWER CELL
WARNING: Only use a
CESC8000 standard charger to
charge the CEC6600 Power Cell.
Charging any other Power Cells or
batteries with this charger may
damage the Power Cells, batteries, or
charger, and possibly cause serious
injury or property damage from fire,
explosion or hazardous fumes.
Power Supply Cord: Use UL/CUL listed
detachable power supply cord, type
SPT-2, 18 AWG,three conductors, cord
rate VW-1,105℃300V. Cord external
length minimum 1.2 m. One end
terminates in a molded-on attachment
plug with a 15A, 125V (NEMA 1-15P)
configuration. Other end terminates in
a molded-on connector which mates
with the Power Cell charger.
1. To charge the CEC6600 Power
Cell, after choosing 115V or 230V
on bottom of charger, place the
charger (1) in a dry location and
plug into the appropriate outlet.
NOTES:
a) Once Power cell is fully
charged, charger will stop
charging.
b) Charger can charge one or two
power cells at the same time.
2. Insert the Power Cell (2) into the
matching cavity (3) in the top of
the charger.
NOTES:
a) Make sure the raised ridge (4)
on top of the Power Cell is
facing toward the LED lights (5,
6 & 7, 8) on the charger.
1
5
6
3
4
2
7
8

10
ASSEMBLY AND OPERATING
b) Make sure the Power Cell is
pressed fully into the charger
cavity.
3. When the power is on, both the
green LED (6 & 8) will be ON and
red LED (5 & 7) will be off.
4. When one Power Cell is inserted
into each side of the charger, the
red LED (5) or (7) will remain ON
and green LED (6) or (8) will be
off, indicating that the Power Cell
is being charged. The other side
without battery shows the green
LED is flashing.
5. When one Power Cell is fully
charged, the green LED (6) or (8)
will remain green and the red LED
(5) or (7) will be off.
CHARGING THE POWER CELL –
cont’d
6. When two Power Cells are
inserted into the charger, the red
LED (5) & (7) will remain ON and
green LED (6) & (8) will be off,
indicating that the Power Cells are
charging.
7. When two Power Cells are fully
charged, the green LED (6) & (8)
will remain green and the LED (5)
& (7) will be off.
8. When the Power Cell is fully
charged, remove it from the
charger and unplug the charger
from the power source.
1
5
6
3
4
2
7
8

11
ASSEMBLY AND OPERATING
NOTES:
a) Lithium-Ion Power Cells will
continue to provide nearly full power
with minimal power fade unlike
traditional batteries; when the Power
Cell is fully discharged, the Power
Cell electronic control circuitry will
immediately cut power output to the
tool without notice. A discharged
Power Cell should be promptly
recharged to maintain its operational
voltage potential and to be ready for
future use.
b) Do NOT charge the Power Cell
when the work area or the Power
Cell temperature is at or below 32° F
(0°C) or above 113° F (45°C). The
optimal temperature is 68° F (20°C).
c) Remove the Power Cell from the
charger and unplug the charger once
the Power Cell has been completely
charged.

12
NOTES

13
NOTES

14
WARRANTY
The limited warranty set forth below is given by Cub Cadet LLC (Cub Cadet) with
respect to new merchandise purchased and used in the United States, its
possessions and territories.
Cub Cadet warrants this product against defects in material and workmanship for a
period of three (3) years commencing on the date of original purchase and will, at its
option, repair or replace, free of charge, any part found to be defective in material or
workmanship. This limited warranty shall only apply if this product has been
operated and maintained in accordance with the Operator’s Manual furnished with
the product, and has not been subject to misuse, abuse, commercial use, neglect,
accident, improper maintenance, alteration, vandalism, theft, fire, water or damage
because of other peril or natural disaster. Damage resulting from the installation or
use of any accessory or attachment not approved by Cub Cadet for use with the
product(s) covered by this manual will void your warranty as to any resulting damage.
This warranty is limited to one (1) year from the date of original retail purchase for any
Cub Cadet product that is used for rental or commercial purposes, or any other
income-producing purpose.
HOW TO OBTAIN SERVICE: Warranty service is available, WITH PROOF OF
PURCHASE THROUGH YOUR LOCAL AUTHORIZED SERVICE DEALER. To locate
the dealer in your area, visit our website at www.cubcadet.com or
www.cubcadet.ca, check for a listing in the Yellow Pages, call 1-877-282-8684 or 1-
800-668-1238 in Canada, or write to P.O. Box 361131, Cleveland, OH 44136-0019.
No product returned directly to the factory will be accepted unless prior written
permission has been extended by the Customer Service Department of Cub Cadet.
MANUFACTURER’S LIMITED WARRANTY FOR:

15
WARRANTY
This limited warranty does not provide coverage in the following cases:
A. Tune-ups - Spark Plugs, Carburetor Adjustments, Filters
B. Wear items - Bump Knobs, Outer Spools, Cutting Line, Inner Reels, Starter Pulley,
Starter Ropes, Drive Belts, Saw Chains, Guide Bars, Cultivator Tines, Blades.
C. Cub Cadet does not extend any warranty for products sold or exported outside
of the United States of America, its possessions and territories, except those sold
through Cub Cadet’s authorized channels of export distribution.
Cub Cadet reserves the right to change or improve the design of any Cub Cadet Product
without assuming any obligation to modify any product previously manufactured.
No implied warranty, including any implied warranty of merchantability or
fitness for a particular purpose, applies after the applicable period of express
written warranty above as to the parts as identified. No other express warranty
or guaranty, whether written or oral, except as mentioned above, given by any
person or entity, including a dealer or retailer, with respect to any product shall
bind Cub Cadet. During the period of the Warranty, the exclusive remedy is
repair or replacement of the product as set forth above. (Some states do not
allow limitations on how long an implied warranty lasts, so the above limitation may
not apply to you.)
The provisions as set forth in this Warranty provide the sole and exclusive
remedy arising from the sales. Cub Cadet shall not be liable for incidental or
consequential loss or damages including, without limitation, expenses incurred
for substitute or replacement lawn care services, for transportation or for
related expenses, or for rental expenses to temporarily replace a warranted
product. (Some states do not allow limitations on how long an implied warranty
lasts, so the above limitation may not apply to you.)

16
WARRANTY
In no event shall recovery of any kind be greater than the amount of the purchase
price of the product sold. Alteration of the safety features of the product shall void
this Warranty. You assume the risk and liability for loss, damage, or injury to you and
your property and/or to others and their property arising out of the use or misuse or
inability to use the product.
This limited warranty shall not extend to anyone other than the original purchaser,
original lessee or the person for whom it was purchased as a gift.
How State Law Relates to this Warranty: This warranty gives you specific legal
rights, and you may also have other rights which vary from state to state.
To locate your nearest service dealer, dial 1-877-282-8684 in the United States or 1-
800-668-1238 in Canada.
CUB CADET LLC
P.O. Box 361131
Cleveland, OH 44136-0019

769-11170 / 00 10/15
Chargeur Standard ELITE
CESC8000
Manuel d’utilisation
SPÉCIFICATIONS
Utiliser SEULEMENT avec pile : CEC6600 40V haute énergie
Chargeur : Chargeur Standard ELITE
Puissance absorbée : 100~240 V CA, 60/50 Hz
Puissance fournie : 42 V DC
Poids : 4.85 lb 77.6 oz (2.2 kg)
Besoin d’aide?
Pour obtenir de l'aide sur l'assemblage, le fonctionnement ou la
maintenance de l'appareil, veuillez composer le 1-877-282-8684 (aux
États-Unis) ou le 1-800-668-1238 (au Canada). Des renseignements
supplémentaires peuvent être trouvés sur le site www.cubcadet.com
(aux États-Unis) ou www.cubcadet.ca (au Canada).
BC

2
TABLE DES MATIÈRES
Spécifications du produit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Table des matières . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Avertissements - sécurité générale . . . . . . . . . . . . . . . . . . . . . . . . . . 3-4
Sécurité - électricité . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Enregistrement du propriétaire . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Sécurité générale - outil électrique . . . . . . . . . . . . . . . . . . . . . . . . . . 4-5
Sécurité - aire de travail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Sécurité - électricité . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-5
Sécurité - personnes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Règles de sécurité particulières . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-8
Chargement de la pile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-11
Garantie . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14-16
AVERTISSEMENT :
Le chargeur peut être utilisé par les enfants à partir de 8 ans, les personnes
à capacités physiques, sensorielles ou mentales réduites ainsi que les personnes
qui n’ont pas d’expérience ou de connaissances à condition qu’ils soient
supervisés et qu’ils aient reçu des directives concernant l’utilisation du chargeur
d’une manière sûre en plus d’avoir compris les dangers associés à son utilisation.
Le chargeur standard ELITE n’est pas un jouet. Le nettoyage et l’entretien ne
doivent pas être faits par les enfants sans une supervision adéquate.

3
AVERTISSEMENTS ET SÉCURITÉ GÉNÉRALE
Ce manuel d’utilisation comprend :
• Règles de sécurité générale
• Symboles et règles particulières de sécurité
• Description fonctionnelle
• Assemblage
• Fonctionnement
AVERTISSEMENT : Veuillez conserver le présent manuel pour
consultation future.
Veuillez fournir le manuel à tous les opérateurs et vous assurer qu’ils ont
bien lu et compris les règles de sécurité ainsi que les consignes
d’utilisation avant de se servir de l’outil.
AVERTISSEMENT : Pour ne pas endommager l’outil, pour éviter
les risques de choc électrique et d’incendie, utilisez un circuit de
protection approprié.
Le chargeur de l’outil est câblé en usine pour une alimentation de 100/240 V. Il doit
être branché sur un disjoncteur ou sur un fusible temporisé de 100/240 V, 60/50
Hz et 15 A. Pour éviter les risques de choc électrique ou d'incendie, remplacez
sans attendre un cordon d'alimentation qui est usé, coupé ou endommagé.
SÉCURITÉ - ÉLECTRICITÉ
Avant d'utiliser le chargeur ELITE Standard, lisez ce manuel et toutes
les instructions et les avertissements figurant sur le chargeur de
cellule d'énergie, la cellule d'énergie et l'outil électrique, et respectez
toutes les règles de sécurité et d'utilisation.
MISE EN GARDE : Pour réduire le risque d'incendie ou d'électrocution,
suivez attentivement ces instructions, ne rechargez qu'un seul type de pile à
cellule d'énergie CEC6600 fabriquée par Cub Cadet; d'autres types de
batteries peuvent éclater et causer des blessures et des dommages.
CONSERVER CES INSTRUCTIONS : ce manuel contient d'importantes
consignes de sécurité et de fonctionnement relatives au chargeur de
cellule d'énergie modèle CESC8000.

4
AVERTISSEMENTS ET SÉCURITÉ GÉNÉRALE
SÉCURITÉ GÉNÉRALE - OUTIL ÉLECTRIQUE
SÉCURITÉ GÉNÉRALE - OUTIL
ÉLECTRIQUE
AVERTISSEMENT : Veuillez lire
tous les avertissements relatifs à la
sécurité et toutes les instructions. Le
défaut d’observer les avertissements et
de suivre les instructions peut causer des
chocs électriques, un incendie ou de
graves blessures.
Conservez tous les avertissements et
toutes les instructions pour
consultation future.
Sécurité – aire de travail
Gardez les aires de travail propres et
bien éclairées. Les lieux encombrés ou
sombres sont propices aux accidents.
N’utilisez pas des outils électriques
dans des atmosphères explosives,
notamment en présence de poussière,
de gaz ou de liquides inflammables.
Les outils électriques produisent des
étincelles pouvant enflammer les
liquides, les vapeurs ou la poussière.
Gardez les enfants et les spectateurs
à l’écart lorsque l’outil électrique
fonctionne. Les distractions peuvent
vous faire perdre le contrôle de l’outil.
Sécurité – électricité
La fiche du chargeur doit convenir à
la prise. Ne modifiez jamais la fiche.
N’utilisez pas de fiche d’adaptation
avec un chargeur mis à la terre. Les
fiches non modifiées et les prises
adéquates réduisent les risques de choc
électrique.
Évitez tout contact avec les surfaces
mises à la terre, notamment les
tuyaux, les radiateurs, les cuisinières
et les réfrigérateurs. Le risque de choc
électrique est accru, si une partie du
corps est mise à la terre.
Évitez d’exposer l’outil électrique, le
chargeur ou la pile à la pluie et évitez
tout contact avec de l’eau. Le risque
de choc électrique est accru si de l’eau
s’infiltre dans l’outil, le chargeur ou la pile.
Veuillez enregistrer votre produit en ligne à l'adresse www.cubcadet.com (aux
États-Unis) ou à l'adresse www.cubcadet.ca (au Canada).
ENREGISTREMENT DU PROPRIÉTAIRE