cubiio 2 User manual

MADE IN
TAIWAN
User Manual v1.3

Thank you for purchasing Cubiio2 . This manual will help you quickly understand
the functions and safety precautions of this product.
Please read carefully and follow the contents of this manual before starting to use
Cubiio2: The principle of laser processing is focusing the high-power laser on
surfaces of objects. After absorbing the laser, objects are instantly heated,
burned, or gasified to engrave or cut the object. During the process, harmful light,
temperature, and gases will be generated. It may cause fire, visual impairment,
skin burns, or inhalation of poisonous gas and other hazards.
The copyright in this manual, the hardware, firmware, and software in the product
described therein are owned by MUHERZ LIMITED. All rights reserved.
No part of this publication may be reproduced, stored in a retrieval system, or
transmitted, in any form or by any means, electronic, mechanical, photocopying or
otherwise, without the prior written permission of Muherz.
Please keep this manual for future reference.
We provide online support worldwide. If you have any questions:
[email protected]
01
01
02
04
04
04
05
06
06
07
07
08
09
10
10
10
11
11
11
12
13
13
13
14
15
16
Contents
About This Manual
02 Notices
01 Safety
3.1 Preparing Creative Space
Warnings & Signs
3.2 Unbox
3.3 Overview
03 Getting Started
3.4 Switch & Indicator Light Meanings
3.5 Setup
3.6 WPS Wi-Fi connection
3.7 Install the App
3.8 First Work
4.1 Cleaning
4.2 Maintenance
4.3 Changing Laser
04 Caring
5.1 Specification
5.2 Materials
5.3 Laser Safety
5.4 Engraving Oversize Objects
05 Reference
06 Warranty
Notices for Customers in the U.S.A.
Notices for Customers in Europe
Please make sure you have the latest version of the Cubiio2 user manual.
The latest version of the manual can be found at:
01
ContentsAbout This Manual

0-15y
To prevent injury to yourself or to others or damage to Cubiio2, read the following
safety precautions carefully. The owners of Cubiio2 are responsible for making
sure all those who use the product read and follow the instructions.
Set the machine in a room with good ventilation.
Avoid set it outdoor, direct sunlight, unventilated basement or top floor.
Set the machine on a stable and flat surface.
Tilting may trigger safety mechanisms and stop working.
Do not use in direct sunlight or wet surroundings.
Ensure temperature is in the range of 0-30℃and humidity is in the
range of 10-75% when operating.
Ensure proper supervision of children or pet.
Cubiio2 is not intended for children under the age of 15 years. Children under
the age of 15 years should be supervised to ensure they do not play around
the machine. Teenagers aged between 15 and 18 years can use the machine
with the consent and/or assistance of their parents or persons who have
parental authority over them.
Do not use Banned materials. [Refer to 5.2 Materials]
Materials containing chlorine will produce extremely toxic and corrosive
fumes when laser process. Reflective materials, such as materials with
mirror surfaces, will cause the laser to be reflected and potentially causing
injury to the user or damage to the machine.
Never run Cubiio2 unattended.
02
01 Safety

Choose dry powder or foam type fire extinguisher according to
different processed objects.If you see flame or fire - Immediately
stop the machine and extinguish.
Immediately call the fire brigade for Supports.
Clean and maintain the machine regularly. [Refer to 04 Caring]
Always unplug the power supply before cleaning and maintenance.
Cleanliness is important to safety and perform optimally. Processed debris
and ash left in the machine may reduce efficiency or cause fire.
Do not operate machine if damaged
Any damages to any components to the machine could compromise its
safety and cause injury. If any part of the machine is damaged, contact your
reseller or Muherz directly.
Do not place any liquids or flammable materials near or around
the device.
The dangerous items can result in electric shock or explosion or fire.
Do not look directly at the flame light generated during processing.
Looking directly at the light may cause visual impairment or other
light hazards.
03
01 Safety

Notices for Customers in the U.S.A.
Federal Communications Commission (FCC) Radio Frequency Interference
Statement
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or televi-
sion reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the follow-
ing measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
Consult the dealer or an experienced radio/television technician for help.
Modifications
CAUTIONS
The FCC requires the user be notified that any changes or modifica-
tions made to this device that are not expressly approved by Muherz
may void the user’s authority to operate the equipment.
Notices for Customers in Europe
This symbol indicates that this product is to be collected separately.
The following apply only to users in European countries:
This product is designated for separate collection at an appropriate
collection point. Do not dispose of as household waste.
For more information, contact the retailer or the local authorities in
charge of waste management.
Caution: Use of controls or adjustments, or performance of procedures other
than those specified herein may result in exposure to hazardous laser radiation.
Use only Cubiio Certified Accessories
Only accessories certified by Cubiio specifically for use with your Cubiio2 are
engineered and proven to operate within its operational and safety requirements.
The use of non-certified accessories could damage your Cubiio 2 and void your
warranty.
04
02 Notices

Warnings & Signs
All signs of warnings and information on Cubiio 2 locate where they must be,
where may contains sources of dangers before and/or during operations. Do not
remove any of the signs for the safety.
Serial number labal
Serial number labal
02 Notices
Cubiio 2
Cubiio2Plus
05

3.1 Preparing Creative Space
A good environment is very important for using Cubiio2. We recommend you build
a comfortable and safe space of creativity by following the picture below.
RESTRICTED AREA / REMOTE INTERLOCK
Keep children / pets away from the machine.
User can set a remote interlock between machine and
door if needed.
FIRE BLANKET/ EXTINGUISHER
Necessary equipments.
SMOKE DETECTOR
It provids critical early warning for dangerous situations.
EXHAUST VENTING
Vent exhaust safely out of working space.
A fume extractor purifier is recommeded.
STABLE TABLE
Ensure machine is away from the edge and keep flammable
materials away from the machine.
06
03 Getting Started

WPS
3.2 Unbox 3.3 Overview
Packing List
Adaptor
Other Accessories
Filter Box
Working Area
Touch Switch/ State indicator light
Safety Key (Remote interlock) Socket
Power Plug
Power Switch
Leveling Feet
Inlet
Laser Head (Laser Aperture)
Exhaust hose &
socket
Power cord
*US type only
*Contents depend on your order
Outlet (Exhaust House Connector)
Reset
Cubiio2
07
03 Getting Started

3.4 Switch & Indicator Light Meanings Example Indicator Light
Breathing Cyan Initializing /
Wi-Fi configuration
Breathing
Slow on and slow off.
Warning
Instant on and slow off.
Three-flash
Periodically falsh three times.
Three-flash Cyan WPS setting
Breathing Green System is ready
(Pending)
State
Warning Purple Laser is ON
Warning Red Error
Three-flash Red Updating firmware
Homing
While Cubiio2 is pending (Breathing Green), you can run the laser head back to
the origin position by touching the switch for 3 seconds.
Pause/Resume
During a laser process (Warning Purple), you can pause or resume the work by
short touching the switch.
Stop
During a laser process (Warning Purple), you can STOP the work by touching the
switch for 1.5 seconds.
08
03 Getting Started

1
2
3
Loosen the 4 screws of rear fans by a PH2 screw driver.
Protective lid covering
films on both sides
Protective bottom
covering
Mount the socket by the 4 screws.
Attach the end of the exhaust tube to the socket. Ensure the
other side is placed to allow venting of fumes safely out of
the working space.
3. Attach Exhaust Hose
5
6
Step5 Connect the power & witch on.
4. leveling
Adjust the 4 leveling feet to level the machine. The two door
sensors should be triggered by the acrylic lid same time
after leveling.
Step2Peel off protective coverings
3.5 Setup
Scantoviewthe
demovideo
Step1
09
03 Getting Started

Cubiio2connectsyourmobiledeviceswirelesslythroughaWi-Finetwork.Youcan
control your Cubiio2 once your Cubiio2 and your devices join the same Wi-Fi
network.Therewillnotbeonemoreannoyingwiresinyourworkarea,andyouwill
neverbetiedupnexttoyourCubiio2.
You don't need to do all of them. Choose a way that works for you, and that's enough.
* WPS refers to "Wi-Fi Protected Setup." This feature allows users to set up their Wi-Fi
network securely without any typing of SSID and password. (search WPS to see more
details of WPS)
There are two ways to configure a Cubiio2 to join your hot spot
1. Use WPS of your Wi-Fi router if it had the feature.
Cubiio2
APP
Computer
Assistant
Computer
Assistant
Computer
Assistant
Cubiio2
APP
Cubiio2
APP
Android
Android
Android
IOS
IOS
IOS
Mac
Windows
cubiio.com/support/download/
1. Press the WPS button until the indicator light turns into three-flash cyan.
[Refer to 3.3 Overview ]
2. Follow the instructions of your Wi-Fi router to launch WPS hand shaking.
*If you have any questions, please check the instruction manual of the router.
3. Wait for your Cubiio2 joining your Wi-Fi network. The indicator light will
become breathing green after joining the Wi-Fi network successfully. [ Refer
to 3.4 Switch & Indicator Light Meanings ]
4.[3.8Firstwork]Continue.
3.6 Install the App
3.7 Connection settings
3.8 First Work
Use the WPS feature of your Wi-Fi router
Way
Use Cubiio2 App to configure your Cubiio2
ConfigureCubiio2toJoinYourWi-FiHotSpot
2. Use Cubiio2 App to configure the Wi-Fi's name (SSID) and the password.
Use Cubiio2 App to configure the Wi-Fi's name (SSID) and the password.
* The following instructions will walk you through all necessary steps to make your
Cubiio2 join your Wi-Fi network, and then you can connect your Cubiio2 through it.
ScantheQRcodetoviewthedemovideo
Way
Recommended
10
03 Getting Started

1. Remove the X-axis cover by a T10H screwdriver.
2. Clean both X and Y axis guide bars with a lint free cloth. DO NOT use water, alcohol or
other surfactants to wipe this part.
3. Wiped the guide bars with a lint free cloth and a small amount of lubricant.
4. Screw the X-axis cover back. Move the laser head maunally several times.
4.2 Maintenance
Always unplug the power supply before cleaning and maintenance.
Regular lubrication and maintenance can extend Cubiio2 's service life.
Suggested caring schedule:
* The time will vary depending on the pollution caused by processing different objects.
Cleaning
Maintenance
2-3 days
3-4 weeks
1. Clean the debris and ash in the machine with a brush and/or a vacuum cleaner
2. Open the filter box and clean the DC fans.
3. Clean the guide bars with a lint free cloth. DO NOT use water, alcohol or other
surfactants to wipe this part.
4. Clean the workspace and the lib with a lint free cloth. Never use paper towel or
abrasive materials on the lid as these will cause scratching.
5. Wet one side of the cloth with a glass cleaner and carefully wipe the lens. Make sure
not to touch the lens after cleaning.
Required tools: vacuum cleaner, Brush, lint free cloth, glass cleaner
Required tools: T10H screwdriver, lint free cloth, Grease (ISOVG32~68)
4.1 Cleaning
11
04 Caring

Required tools: H2.5 screwdriver
1. Remove the screw in the upper right corner of the laser cartridge with a
H2.5 screwdriver.
2. Carefully take the laser cartridge in vertical. DO NOT twist or tilt it.
3. Align the new laser cartridge with the stage and gently press down vertically
*It will not be set if not in the correct position. DO NOT force to install.
4. Fasten the screw back
4.3 Changing Laser Cartridge
12
04 Caring

5.1 Specification
5.2 Materials
Cubiio2
500 x 400 x 60 mm 620 x 490 x 60 mm
Dimension Paper >1mm
Material Engrave Cut Description
Paper is flammable. Flames may be generated
when processing speed set too low.
Wood >3mm Wood grain and the protective painting will affect
the processing results.
Acrylic >3mm The result is color dependant.
Plywood >3mm
The glue and wood used in different plywood will
affect the processing quality. Please pay attention
that some plywood may contain formaldehyde.
MDF >3mm
The glue and wood used in different MDF will affect
the processing quality. Please pay attention that
some MDF may contain formaldehyde.
Genuine
leather >1mm
A lot of gas will be generated when processing
leathers, please ensure ventilation. Flames may
be generated when processing speed set too low.
EVA >5mm
Commonly used for making mats or seals. It is an
non-toxic material that can be processed safely by
laser.
6kg 8kg
Weight
300 x 220 x 10 mm 420 x 300 x 10 mm
Working Range
0 - 30 ℃
Operating Temperature
10 - 75 %
Operating Humidity
<5W @ 450 nm
Laser Source
AC 100-240 V , 60 W
Power Input
Connection
Cut / Engrave
Please be sure to read this table carefully to avoid processing BANNED materials.
Cubiio2 Plus
Wi-Fi with WPS (2.4GHz only)
13
05 Reference

ABS
Shale Concrete Anodized Aluminum SUS 304
Paper Wood Acrylic Genuine leather
Engrave only
Banned Material
Chlorine-containing
materials
Description
BANNED material. Although ABS is easy to process, it is
not recommended for general users since carcinogens
can be produced when not completely burned.
BANNED material. Using chlorine-containing materials
such as PVC, cutting sheet or artificial leather will
produce extremely toxic fumes, leading to severe health
issues and machine damage.
Reflective material
BANNED material. Using reflective materials such as
mirrors, polished metals, etc., may emit laser light out
from unexpected directions and cause injury.
Container with
pressurized contents
BANNED material. such as sparkling wine bottle, beer
bottle, spray paint bottle, etc. The temperature rise or
surface cracks caused by the laser may result in an
explosion.
BANNED material
Shale
Material Engrave Cut Description
Golden lines can be produced by the laser.
Concrete Different parameters can show different results.
Anodized
Aluminum Different parameters can show different results.
Matte
SUS 304 Only 5W laser cartridge can engrave SUS 304.
14
05 Reference

To assess the potential hazards of laser systems, they are divided into
eightsafetyclasses:1,1C,1M,2,2M,3R,3Band4.Cubiio2isaclass1
laser.Thisisguaranteedbyitsenclosedprotectivehousinganditssafety
devices.However,aclass4lasersourceisusedinthehousingofCubiio2.
Theclass4laserisverydangeroustotheeye(completelossofeyesight)
andverydangeroustotheskin(riskofburning).Diffusedlightcanalsobe
dangerous. There is a risk of fire when using this laser light. Without
protectivedevices,thisdirectlightordiffusedreflectedlightisdanger-
oustobothpersonsandobjects.
Please note that improper commissioning of the device will invalidate
thestatusofClass1safety,andmayresultinthereleaseofharmfullight.
Thefollowingrisksmayresultfromusinglaserlightswithoutprotective
measures:
The laser may only be operated under the conditions specified by
Cubiio2.NevermodifyordisassembleCubiio2.
Eyes: retinal burns, complete loss of sight
Skin: burns
Clothing: fire hazard
5.3 Laser Safety
Cubiio2 provides free mode for users with laser professional skills to
process objects that cannot be placed in the machine. In this mode,
Cubiio2isNOTinthesafestateaslaserclass1andmaycausethedangers
mentioned in the previous chapter. Be sure to read and observe the
followingprecautionsbeforeremovingbottom.
Safetykeyorremoteinterlock
Lasersafetyglasses(OD5+,450nm)
Fireblanketandfireextinguisher
Well-ventilatedindoorspace
Wearamaskorsetadustfilteringequipment
Surfacethatdoesnotreflect/diffusebluelight,suchasconcretefloor
Requiredtoolsandlocations:
1. Unplug the power cord, and then turn Cubiio2 upside down.
2. Remove the 8 screws on the stainless steel base plate by a T10H screwdriver.
3. Turn the machine back . Plug in the safety key (or remote interlock.)
* Laser will not emit in the free mode before the safety key is inserted
4. Wear laser safety glasses and a mask. Turn on the dust filtering equipment.
And complete other necessary protective measures.
5. Adjust the height of 4 leveling feet to keep the machine body level.
6. Turn on the machine normally.
Process:
5.4 Engraving Oversize Objects
15
05 Reference

The products, including Cubiio2 and laser cartridge, are guaranteed
against any manufacturing defects for 12 months from the date of
shipment. If during this period of guarantee the product proves
defective due to improper material or workmanship, MUHERZ LIM-
ITED. (“MUHERZ”) will, without charge for labor and parts, repair
the product. MUHERZ reserves the right (at its sole discretion) to
replace or repair the product.
Damage caused by misuse including but not limited to failure to use
the product for its normal purpose or according to the manual on
the proper use and installation, or use of the product inconsistent
with the safety standards in force in the country where it is used,
modifications or adjustments ,hacking.
The warranty will not be applicable in the case of:
Damage caused by accidents including but not limited to lightning,
water, fire, misuse or neglect.
Defacing, illegibility or removal of the warranty seal or serial
number on the product.
This warranty will not cover:
1. Accessories or consumables such as filters.
2. Cosmetic damage or normal wear and tear, such as scratches,
nicks, and dents.
3. Products that are obtained and/or used in contravention of the
laws of your country.
4. Power decay of laser source due to normal use. The output of
the laser cartridge will naturally decay with the use time. The
definition of the laser cartridge failure is that it does not emit
at all or decay to less than 50% of the rated power. The manu-
facturer's laser power meter is used as the measurement
benchmark.
16
06 Warranty

Dealer stamp
Date of purchase
DD / MM / YY