Cubro OAKWOOD 508 User manual

Freephone 0800 656 527 Email [e-mail] www.cubro.co.nz
USER GUIDE
OAKWOOD® SWIVEL BATH SEAT
ORDERING CODE: 508
SAFE WORKING LOAD 120KG

Oakwood® Swivel Bath Seat
USER GUIDE
ug508_OakwoodSwivelBathSeat_0418
Freephone 0800 656 527 Email [e-mail] www.cubro.co.nz
2
1. INTENDED USE
Consists of aluminium base frame which adjusts to t over the width of the bath, and an easy-to-clean
plastic seat which swivels on the base (rotates 360°.) The lever which operates the seat rotation can be
tted either on the left or right side. Comfortable, safe and secure for the user, this bath seat is suited
for domestic usage. Height adjustable option available, please enquire.
2. SAFE USE
WARNING! This user manual must be read before using the bath seat. Severe injury
or death may result if user instructions, maintenance instructions and product
warnings are not followed.
WARNING! The decision to use this bath seat should always be guided by a qualied
Health Care Professional, who can also advise on its use in the intended environment
and provide instruction about transfer techniques and level of assistance required.
• Do not exceed the safe working load of 120kg.
• Check that the bath seat is rmly assembled before use.
• Ensure that there is a sucient amount of ledge around the side of the bath so that the seat is
stable on the bath sides and cannot slide.
• Inspect at regular intervals for wear and damage. Remove from use immediately if faults are found.
• Supervision or assistance when using the bath seat is recommended for users with limited mobility.
• The product is suitable for use in baths; it is not suitable for use in swimming pools.
• Use the bath seat only for the purpose it is intended for.
CONTENTS
1. Intended use ...............................2
2. Safe use.....................................2
3. Product specications .......................3
4. Instructions for use..........................3
5. Care and maintenance ......................4
6. Warranty ....................................5

ug508_OakwoodSwivelBathSeat_0418
Freephone 0800 656 527 Email [e-mail] www.cubro.co.nz
3
Oakwood® Swivel Bath Seat
USER GUIDE
4. INSTRUCTIONS FOR USE
TO FIT THE SEAT TO THE BATH
• Rest the frame securely on the bath. At least 25mm of each arm must rest on the sides of the bath.
• To adjust the width, loosen 4 x knobs on base frame. Slide side arms with rubber grips outwards.
Tighten knobs.
SWIVEL FUNCTIONALITY
To engage the seat’s 360° swivel function, use the locking lever:
• To unlock push down the lever and swivel in the required direction.
• To lock pull the lever up until the swivel function locks and the seat
no longer rotates.
Ensure the swivel mechanism is locked before attempting to
sit on the seat.
3. PRODUCT SPECIFICATIONS
Safe working load 120kg
Adjustable width 700mm – 855mm (external)
to suit most baths
Width inside arms 470mm
Back height 420mm
OPTIONS
Locking lever
508/HA50: 50mm extra seat height 508/HA100: 100mm extra seat height

Oakwood® Swivel Bath Seat
USER GUIDE
ug508_OakwoodSwivelBathSeat_0418
Freephone 0800 656 527 Email [e-mail] www.cubro.co.nz
4
5. CARE AND MAINTENANCE
• Dry down after using.
• Clean and disinfect using regular household cleaning products.
• DO NOT use abrasive powders or scouring pads to avoid causing corrosion.
• Should the equipment appear damaged, corroded or rusted remove from use immediately.
EXPECTED LIFETIME
Two years from date of purchase.
DISPOSAL
Products that can no longer be used are to be disposed of separately from household rubbish. This
must be done according to the local and national regulations for environmental protection and raw
material recycling.
Please look at your local council’s website for further information on the correct disposal.
For Any Servicing, Maintenance and Troubleshooting Queries,
Please Contact The Cubro Service Dept;
Ph. 0800 656 527
Ph. [phone]
E: [e-mail] cubro.co.nz
Address: 149 Taurikura Dr, Tauriko, Tauranga, New Zealand
WARNING! Do not make any changes or modications to this product without
consultation from Cubro.
HOW TO USE THE BATH SEAT
• Ensure the swivel mechanism is locked before attempting to sit on the seat.
• To sit on the seat, move backwards until you can feel the seat behind your legs,
place each hand on the armrest. Support your body and prevent the seat from
slipping away. Then lower yourself down and swivel into place as required.
• When getting o the seat, ensure the swivel function is locked. Move your
bottom to the front edge of the seat ensuring your feet are rmly placed on the
oor. Use the armrests to push yourself into a standing position leading with
your head and shoulders.

ug508_OakwoodSwivelBathSeat_0418
Freephone 0800 656 527 Email [e-mail] www.cubro.co.nz
5
Oakwood® Swivel Bath Seat
USER GUIDE
6. LIMITED WARRANTY
1. This warranty applies only to the original purchaser of CUBRO LTD’s product (who must be a
purchaser who is resident or carrying on business in New Zealand and who has purchased the
product directly from CUBRO LTD, or from a CUBRO LTD authorized distributor or reseller in New
Zealand) and it is not transferable to any other person or entity.
2. This warranty replaces all conditions, warranties or guarantees that might be implied by law
in favour of any person, which are excluded to the fullest extent permissible by law. Where the
Consumer Guarantees Act would apply but the purchaser acquires or holds themselves out as
acquiring any product for business purposes, the guarantees provided under the Consumer
Guarantees Act are excluded in relation to that product.
3. CUBRO LTD warrants the product to be free from defects in materials and workmanship from
date of purchase for a period of one year (12 months). This warranty does not cover any damage,
defect, expense or loss of any kind caused by accident, misuse, abuse, neglect, negligence,
alteration or modification (which includes the use of unauthorised parts or attachments),
improper service, repair by other than authorized personnel or any defects not related to
materials or workmanship. Wear of components in normal operation and failures resulting
therefrom are excluded from this warranty.
4. CUBRO LTD has no obligation to the purchaser and is not obligated to honour all or any part of
this warranty unless the following procedure is followed by the purchaser:
a. Before making a warranty claim, the purchaser should ensure that the product is defective
by following standard ‘trouble shooting’ procedures and be able to attribute the fault to a
defect in materials and/or workmanship of CUBRO LTD;
b. If CUBRO LTD determines that the product is not defective, or that the warranty claim is
otherwise invalid, CUBRO LTD shall charge the purchaser a handling and servicing fee as
well as any freights costs.
c. Upon receiving notice from the purchaser of an alleged defect in a product (which defect
should be reported to CUBRO LTD immediately), CUBRO LTD will issue a serialized return
management authorization (RMA). The purchaser must then return the entire unit or
remove, at the purchaser’s cost, the defective component part(s) identified, pack the unit
or the component part(s) in a manner to avoid shipping damage and to ship the unit or
the component part(s) to either CUBRO LTD, or a service centre as specified by CUBRO LTD,
within 30 days of the date of the serialized return authorization date.
d. If CUBRO LTD require additional information relating to the use of the product by the
purchaser or any other relevant information, the purchaser will supply such information as
soon as practically possible and in such a manner as CUBRO LTD may reasonably require.
e. If CUBRO LTD access the purchaser’s claim, it will either repair or replace the product, or
repair or replace the defect in workmanship, as it may determine in its sole discretion.
5. Proper selection of a specific product for a specific application and operating environment, and
its compatibility with other equipment is the purchaser’s responsibility. CUBRO LTD does not
warrant the performance of its products or their suitability for a particular purpose.
6. CUBRO LTD shall not be liable under any heading (whether in contract, negligence, or otherwise)
for any consequential, indirect or incidental loss or damages of any kind and the maximum
aggregate liability of CUBRO LTD (under any one or more headings) shall be the purchase price of
the product.

Oakwood® Swivel Bath Seat
USER GUIDE
ug508_OakwoodSwivelBathSeat_0418
Freephone 0800 656 527 Email [e-mail] www.cubro.co.nz
6

ug508_OakwoodSwivelBathSeat_0418
Freephone 0800 656 527 Email [e-mail] www.cubro.co.nz
7
Oakwood® Swivel Bath Seat
USER GUIDE

Freephone 0800 656 527
Freefax 0800 428 276
www.cubro.co.nz