ITALIANO ENGLISH
Dispositivo Medico di Classe I
D. Lgs. 24/02/97 n.46 attuazione della direttiva CEE 93/42
Codice RS910
Grazie per aver acquistato il supporto per WC della linea MOPEDIA by Moretti, fabbricato
secondo i più alti standard di qualità e sicurezza e conforme alla direttiva europea sui dispo-
sitivi medici (93/42/CEE). Struttura in alluminio anodizzato.
Montaggio
Montare la barre anteriore (A) e la barra posteriore (B) coma da figura utilizzando le viti in
dotazione. [Utilizzare foto prodotto con indicazione A e B]
Assicurasi di stringere accuratamente le viti di fissaggio.
Regolazione dell’altezza
Premere il fermo e sfilare la canna portandola in corrispondenza dei fori in base all’altezza
desiderata. Riposizionare il fermo sul foro per bloccare la canna e assicurarsi che il fermo sia
penetrato completamente nel foro. Assicurarsi di regolare tutte le quattro gambe alla stessa
altezza.
Pulizia
Utilizzare un panno umido ed un normale detergente per ambienti. Si raccomanda di non
immergere completamente i componenti in acqua. Far scolare l’acqua dopo ogni utilizzo ed
asciugare accuratamente le parti.
Avvertenze
Il supporto è raccomandato per persone con un peso massimo di 100 kg.
Il fabbricante e i distributori declinano ogni responsabilità per conseguenze derivanti da un
uso improprio del prodotto.
• Verificare che il prodotto vi sia stato consegnato in perfetto stato prima di usarlo.
• In caso di dubbi sull’utilizzazione, sulla regolazione o sulla manutenzione del prodotto, con-
tattare il rivenditore.
• I pezzi usurati, danneggiati o mancanti dovranno essere sostituiti.
• Non conservare il prodotto all’esterno.
• Verificare periodicamente la stabilità del prodotto ed il corretto fissaggio delle viti, così
come lo stato dei puntali di gomma.
• Evitare di utilizzare il prodotto su superfici bagnate o umide.
I Class Medical Device
according to EEC directive 93/42
Code RS910
Thank you for purchasing the toilet safety rail MOPEDIA by MORETTI, which has been manu-
factured according to the highest quality and safety standards and in accordance with the
European Directive on Medical devices ( 93/42/EEC). Realised in anodized aluminium.
Assembly instructions
Follow the drawing to assembly by screws the front bar (A) and the rear bar (B).
Make sure all screws are tightened enough .
To adjust height
press the stopper and slide the cane to the desired height. Put the stopper and make sure it
is fully protruded through the desired hole. Check all four legs have the same height.
Cleaning
Mopedia safety toilet rail is designed for minimum maintenance and requires the occasional
wipe over with a soft cloth. Use general purpose neutral detergent and warm water.
Don’t deep the parts in water. Drain the seat tubes after use and dry all parts thoroughly.
Warning
This product is recommended for people weighting kg.100 maximum.
The manufacturer and distributor decline all responsibility for any consequences resulting
from an incorrect use of this product.
• Check that the product has been delivered in perfect condition before you use it.
• In case of doubts about the use, adjustment or maintenance of the product, please contact
your dealer.
• Worn, damaged or missing components must be replaced.
• Do not store the product outdoors.
• Periodically check the stability of the product, screws are properly tightened and the rub-
ber caps end in good conditions.
• Avoid to use toilet satey rail on wet surfaces.