Cult Debden 14825 User manual

IMPORTANT: PUT ALL SCREWS INTO PLACE BEFORE TIGHTENING EACH ONE GRADUALLY IN SEQUENCE.
THIS IS IMPORTANT TO ENSURE THAT ALL THE BOLTS LINE UP CORRECTLY TO START WITH
ASSEMBLY & PRODUCT CARE
Outdoor Fire pit
5059413684616
Thank you for purchasing this PRODUCT. Please read the instrucons carefully before use to ensure
safe and sasfactory operaon of this product.
Pre-assembly preparaon
Please ensure instrucons are read in full before aempng to assemble this product
Please check the pack contents before attempting to assemble this product. A full checklist of
components is given in this leaflet. If any components are missing, please contact the retailer from
whom you bought this product.
You will need
“Allen Key (included)”
This product is HEAVY, it should be assembled as near as possible to the point of use. TAKE CARE
WHEN LIFTING to avoid personal injury and (or) damage to the product.
This product takes approximately 5 MINUTES to assemble with 2 PEOPLE.
The fings pack contains SMALL ITEMS which should be KEPT AWAY FROM YOUNG CHILDREN.
Read this leaflet in full before commencing assembly.

IMPORTANT: PUT ALL SCREWS INTO PLACE BEFORE TIGHTENING EACH ONE GRADUALLY IN SEQUENCE.
THIS IS IMPORTANT TO ENSURE THAT ALL THE BOLTS LINE UP CORRECTLY TO START WITH
Fittings and Parts Checklist
Part Description Image Qty
ABowl 1
Legs 2
Connecting Rod 2
Grill 1
Poker 1
Handle 2
Allen Screw 8
Allen Key 1
B
C
D
E
F
G
H
IMPORTANT: To avoid damage to floor we would advise parts are assembled inside the open
packaging, or lay onto a clean carpet or banket.

IMPORTANT: PUT ALL SCREWS INTO PLACE BEFORE TIGHTENING EACH ONE GRADUALLY IN SEQUENCE.
THIS IS IMPORTANT TO ENSURE THAT ALL THE BOLTS LINE UP CORRECTLY TO START WITH
Step by Step Assembly Instructions
Step Two
Step one
Using Allen Key (H) assemble Handle (F) and Bowl (A) using Allen Screw (G) until hand tight, as position
below.
Ensuring the structure is align Gently place the Legs (B) on to the Connec ng Rod (C) of the.
assembled structure and secure using Allen Screw (G) with the help of Allen Key (H).
Fully ghten all connec ons now.

IMPORTANT: PUT ALL SCREWS INTO PLACE BEFORE TIGHTENING EACH ONE GRADUALLY IN SEQUENCE.
THIS IS IMPORTANT TO ENSURE THAT ALL THE BOLTS LINE UP CORRECTLY TO START WITH
Finish.
Step Three
Place the Grill (D) and Bowl (A).
Assembly is complete and the product is ready to use.
IMPORTANT: PUT ALL SCREWS INTO PLACE BEFORE TIGHTENING EACH ONE GRADUALLY IN SEQUENCE.
THIS IS IMPORTANT TO ENSURE THAT ALL THE BOLTS LINE UP CORRECTLY TO START WITH
OUTDOOR FIREPIT
Thank you for purchase, we hope you enjoy your furniture for the upcoming summer and years to come.
Below are a few points about your furniture, please read and retain for future reference.
Our fire pits and burners have been made using the highestquality iron.
All of our iron products are supplied in a primer orbase coat only.
All metal items corrode and age over time due to the nature of the metalwork. Outdoor burners, due to their
exposure to moisturein the air and other outdoor elements, will inevitably develop a surface rust.
Due to the high temperatures, this is even more evident once the burners have been used, as the heat will
remove any protective coating applied. This oxidation process will not typically affect the durability of the fire pit.
Fire pits will develop a natural patina which is not detrimental to the function of the burner, and is just part of the
natural ageing process.
The addition of a drainage hole to the bottom of our burners alsowill ensure water will not collect when not in use.
Safety Instructions
Furniture can be dangerous if incorrectly installed. Assembly should be carried out by a competent person.
No liability will be accepted for damage or injury caused by incorrectly insalled or assembled furniture.
·Not for indoor use
·Always ensure that your burner is placed on a flat and stable surface
·Always ensure there is a water supply nearby should you need todampen the re at any point during use
·Do not leave your burner unattended when in use
·Children should always be supervised when your burner is lit
·In order to keep the metal away from harsh weather, please cover or move your burner into a closed area when not in use
·Please remove ash after use, as this can be harmful to your burner's metalwork
·Avoid using large amounts of cold water to extinguish fires, as the sudden drop in temperature may cause the metal to crack
·We recommend that you only use wood in your burner, and do not suggest the use of home heating coal
·On first usage you may experience an initial odour due to the protective oils used. This is completely normal with a new firepit.
WHEN CARED FOR PROPERLY, THIS HAND CRAFTED FURNITURE WILL PROVIDE YOU WITH YEARS OF ENJOYMENT
AT YOUR HOME.
PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE