Cupra BORN User manual

CUPRA BORN
QUICK START GUIDE

01
TABLE OF
CONTENTS
CONNECTIVITY
SWITCHING ON
ELECTRICAL CHARGE
INFOTAINMENT

AUTOMATIC CONNECTION OF THE DRIVE SYSTEM
Enter the vehicle Press the brake pedal Select Dor Ron the
gear selector
Confort Ready:
Air conditioning and infotainment
available
Park:
Vehicle on and stopped in a park status
Ready:
Vehicle ready to drive
The Digital Cockpit displays: The Digital Cockpit displays: The Digital Cockpit displays:
01 02 03
SWITCHING ON
AUTOMATIC DRIVER DETECTION
NEW FEATURE WITH CUPRA!
Possible to switch on the vehicle’s
ignition without pressing the
Start ENGINE Stop button

AUTOMATIC OFF
Brake to stop
(if Autohold is not on,
pressPon the selector)
Leave the vehicle
(no need to press the
StartENGINE Stop button)
Activate door locking
Ready:
Vehicle on and stopped, ready to drive
The vehicle is switched o by
automatic driver detection
The Digital Cockpit displays: The Digital Cockpit displays: The Digital Cockpit displays:
01 02 03
SWITCHING ON
NEW FEATURE WITH CUPRA!
Possible to switch o the vehicle’s
ignition without pressing the
StartENGINE Stop button

RECOGNISE WHETHER THE
DRIVE SYSTEM IS ON OR OFF
With the drive
systemon
The Digital Cockpit displays
the speedometer / speed
indicator:
With the drive
systemo
The Digital Cockpit displays the
Cupra Born car:
01
02
SWITCHING ON

ACCESS ROUTE TO THE DIGITAL MANUAL
With the Main Menu in “tile” mode , press:
Help > Vehicle wallet
01
Infotainment reset
As with most state-of-the-
art computer and electronic
equipment, in certain cases
the system may need to be
rebooted to make sure that
it operates correctly. To do
this, if appropriate, press
and hold the On/O button
of the infotainment system
for approx. 15 seconds until
the CUPRA logo appears
onthedisplay.
INFOTAINMENT

CUPRA CONNECT
REGISTRATION PROCESS
To make registration easier, watch the following video for
a step-by-step explanation of the registration process:
Download the “How to register” video here
Use the My CUPRA App to
register:
Don’t have the My CUPRA App yet?
Download it here:
CONNECTIVITY
iOS Android

Create a CUPRA ID,
login and complete
your prole
01 Link the vehicle to your
CUPRA ID
02.1 Enter the vehicle identication
number, accept the legal terms and
conditions. Order service packs.
02.2 Scan the QR code generated
by the Infotainment system
02.3 Go to MyCUPRA App and select
the preferred Authorised Service*
02 Registration complete
03
01. CUPRA ID
02.1. Enter the vehicle
identication number
02.2. Scan the QR code
orenter the CUPRA ID
credentials
03. Complete as primary user
CONNECTIVITY
*Depending on version.

CHARGING THE HIGH-VOLTAGE BATTERY
Make sure that the
cable is connected
correctly (the cable
must be locked by
the vehicle).Start the process by
following the instructions of the
charging point.
Check the charging
status using the
indicator light on the
charging cover. For
more information, see the sticker
next to the charging socket itself or
the “Charging the high-voltage
battery” chapter of the user
manual.
01 02 White LED
• Flashing: Preparing the charging
process.
• Permanently on: Not charging
Green LED
• Flashing: The battery is charging.
• Permanently on: Process
completed without problems,
full charge.
• Sparkling: If programmed
charging has been activated,
the charging process has not yet
started.
LED alternately ashing
green and red
• Emergency charge at reduced
power due to a charging
connector recognition fault.
Red LED
•Permanently on: Fault in the
charging system. If it remains on
after several attempts, seek spe-
cialist assistance.
ELECTRICAL CHARGE

The connector
remains locked during
the charging process.
03
Warning!
To end the charging process
manually, press the open button on
the central locking remote control
or press “Stop Charging” in the
infotainment system’s e-Manager
menu. You can now disconnect the
cable.
For more information, see the
“Charging the high voltage
battery” of the user manual.
At the end of the
charging process,
remove the cable and
store it in the vehicle if
necessary.
04
ELECTRICAL CHARGE

TIPS TO MAXIMIZE VEHICLE RANGE
Pre-air condition the vehicle
interior when charging to maximise
range. This means that the energy
needed to initially air condition the
vehicle will not be taken from the
battery.
Whenever possible, use the
heated seats instead of the
heating system. The heated seats
consume much less energy than the
heating and avoid unnecessary loss
of range.
The vehicle’s range prediction is
based on how the car is usually
used. Neither gradients nor the
outside temperature are taken into
account. Constant and eicient
driving is recommended to achieve
an optimal prediction.
ELECTRICAL CHARGE

OTHER TOPICS OF INTEREST
How to pair a mobile phone
To pair a mobile phone, please
refer to the section “Pairing,
connecting and managing”
in the “Telephone Interface”
chapter of the user manual.
If necessary, to release the parking brake so that the vehicle can
be pushed: Press the brake pedal and select the Nposition on the
gear selector. Next, conrm “Activate rolling” in the Infotainment
System. Or, open the vehicle settings:
Vehicle > Assistants > Parking Assistants > Brakes and turn on
the function.
For the head-up display
(HUD) windscreen display with
augmented reality (AR), please
see the “Head-up-Display”
chapter of the user manual.
Access the Cubic portal to
purchase data for your vehicle.
Create your account, add your
vehicle identication number
(VIN) and choose from a range of
data plans.
Cubic website:
https://cupra.cubictelecom.com
Multifunction steering wheel
buttons: For functions and
operating logic, please refer to
the “Multifunction steering
wheel” and “Driver assistance
systems” sections of the user
manual.
!

SEAT S.A. is permanently concerned about continuous development of its types and models. For this reason we ask you to understand,
that at any given time, changes regarding shape, equipment and technique may take place on the car delivered. For this reason no
right at all may derive based on the data, drawings and descriptions in this current handbook.
All texts, illustrations and standards in this handbook are based on the status of information at the time of printing. Except for error or
omission, the information included in the current handbook is valid as of the date of closing print.
Re-printing, copying or translating, whether total or partial is not allowed unless SEAT allows it in written form.
SEAT reserves all rights in accordance with the “Copyright” Act. All rights on changes are reserved.
❀
This paper has been manufactured using bleached non-chlorine cellulose.
© SEAT S.A.