Safety Warnings
and Contents
PreparationsIntroduction and
Product Overview
Basic Operation Hints and Tips
and Specification
GB-8
Playback
Set the1. FUNCTION selector to CD mode.
Open the CD door and place a CD with the label side facing up in the CD2.
compartment.
Close the CD door.3.
Focus search is performed when the disc is inside. The total number of tracks will4.
appear on the display.
Press the5. button to start playing the CD disc.
Adjust the6. VOLUME control to the desired level.
Press the7. button again when you want to stop playback temporarily.
Press the8. button to stop playback.
Program
Up to 20 tracks can be programmed for disc play in any order.•
Be sure to press the• button before use to ensure no prior program has been set.
Press the1. PROGRAM button, the display will show 01 and ash.
Select desired track by using the2. or button.
Press the3. PROGRAM button again to conrm desired track into the program
memory.
Repeat steps 2 and 3 to enter additional tracks into the program memory.4.
When all the desired tracks have been programmed, press the5.
button to play the disc in the order you have programmed the
tracks. The program indicator will ash.
Press the6. button twice to terminate programmed play. The
program indicator will turn o.
Repeat
Press the REPEAT button before or during CD playback. You can set a single track or all
the tracks to play repeatedly. Each press switches the repeat mode as follows:
REPEAT 11.
The repeat indicator will ash.
REPEAT ALL2.
The repeat indicator is on.
NORMAL PLAYBACK3.