Currys Essentials C15BW19 User manual

The symbol on the product or its packaging indicates that this product
must not be disposed of with your other household waste. Instead, it
is your responsibility to dispose of your waste equipment by handing
it over to a designated collection point for the recycling of waste
electrical and electronic equipment. The separate collection and
recycling of your waste equipment at the time of disposal will help
conserve natural resources and ensure that it is recycled in a manner
that protects human health and the environment.
For more information about where you can drop o your waste for
recycling, please contact your local authority, or where you purchased
your product.
Visit Partmaster.co.uk today for the easiest way to buy
electrical spares and accessories. With over 1 million
spares and accessories available we can deliver direct
to your door the very next day. Visit www.partmaster.
co.uk or call 0344 800 3456 (UK customers only). Calls
charged at National Rate.
IB safety-Blender-UK-200330V1
DSG Retail Ltd. (co. no. 504877)
1 Portal Way, London, W3 6RS, UK
EU Representative
DSG Retail Ireland Ltd (259460)
3rd Floor Oce Suite,
Omni Park SC, Santry, Dublin 9, Republic of Ireland
BLENDER
For your continued safety and to reduce the risk of injury or
electric shock, please follow all the safety precautions listed
below.
• Read all the instructions carefully before using your appliance
and keep them for future reference.
• Unplug the appliance from the mains supply when not in use,
and before removing, attaching or cleaning any part of the
appliance.
• This appliance is for household use only. Do not use it for
professional catering.
• Do not use the appliance outdoors.
• Do not immerse the appliance base unit or the mains cable or
plug in liquids.
• Do not use the appliance near a source of heat or on an
unstable surface.
• Do not use your appliance in damp or wet conditions.
• This appliance shall not be used by children.
• Keep the appliance and its cord out of reach of children.
• Appliances can be used by persons with reduced physical,
sensory or mental capabilities or lack of experience and
knowledge if they have been given supervision or instruction
concerning use of the appliance in a safe way and if they
understand the hazards involved.
• Ensure that the mains cable does not touch any hot surface
and that it does not overhang the edge of your work surface.
• There are no user serviceable parts in your appliance.
• Do not operate the appliance with a damaged mains cable
or mains plug or after any appliance or attachment damage.
Seek qualied technicians for assistance.
• If the mains cable is damaged it must be replaced by the
manufacturer, its service agent, or similarly qualied persons
in order to avoid a hazard.
• Do not use attachments or accessories which are not
recommended by the manufacturer. They may cause
malfunction or injury.
• Store the appliance away from direct sunlight and out of the
reach of children.
• Do not place your hand in the blender jug. The sharp blades
may cause injury.
• Never insert any hard object or implement into the blender
jug when it is operating. This may cause damage to the
appliance and personal injury.
• Do not place meat containing bones or fruits with large hard
stones in the blender jug.
• If the blender becomes clogged, switch o and unplug
the mains cable from the mains socket before cleaning the
obstruction. Check carefully for damage.
• Do not use the appliance for any purpose not specied in this
manual.
• The blender jug should only be used with the base unit
provided.
• Ensure the base unit is switched o before removing the
blender jug from the base.
• This appliance is intended for indoor household use and
similar applications such as:
- farm houses and by clients in hotels, motels and other
residential type environment;
- bed and breakfast type environment;
- catering and similar non-retail applications.
• Make sure the unit is earthed properly during use. Use of
extension sockets are not recommended. If in doubt, contact
a qualied electrician.
SAFETY WARNINGS
IB safety_Blender_UK_200330_grace.indd 1IB safety_Blender_UK_200330_grace.indd 1 30/3/2020 2:55 PM30/3/2020 2:55 PM

Blender
Customer Care Notice
• It is important that the
lid should be tted and
locked to the jug rst
before securing the jug
onto the base.
• The lid must be secured
and locked to the jug,
otherwise the blender
will not operate!
The jug must be secured and locked to
the base, otherwise the blender will not
operate!
Note-C15BW19-200331V1
Blender_Customer Care Notice_Final200331.indd 1Blender_Customer Care Notice_Final200331.indd 1 2/4/2020 9:51 AM2/4/2020 9:51 AM

IB-C15BW19-200402V2
Cleaning
Cleaning the jug:
1. Pour about 500ml of warm soapy water into the jug and place the jug on the
base.
2. Turn and hold the Speed Selector to ‘P’ for a few seconds to loosen any food
particles and free them from the blades.
• Remove the jug, pour away the water and rinse in fresh running water. Repeat
steps 1 and 2 with fresh water.
• Alternatively the jug may be immersed in warm soapy water and cleaned
using a long handled brush.
• Wash the lid and stopper separately in warm soapy water, rinse and allow to
dry.
Cleaning the base:
• Ensure the blender is unplugged from the mains socket.
• Wipe the outer surface of the base with a damp cloth. Never use abrasive
cleaners or scouring creams.
Cleaning the blade assembly:
1. Hold the jug handle with one hand and with the other
hand rotate the blade assembly to detach it from the jug.
2. Wash it under running water.
• You can also remove the rubber seal ring from the blade
assembly to clean. After cleaning the rubber seal ring,
replace it back into the blade assembly by inserting it
completely into the groove of the blade assembly. Push the
rubber seal ring bit by bit into the groove until the whole
ring is completely inserted. Check to make sure that no part
of the ring is not inserted in the groove.
Storage
After all the components have been washed and dried, re-assemble the blender and
store it out of direct sunlight and out of the reach of children.
Blender
Instruction Manual
C15BW19
Thank you for purchasing your new product.
We recommend that you spend some time reading this instruction manual in
order that you fully understand all the operational features it oers.
Read all the safety instructions carefully before use and keep this instruction
manual for future reference.
DO NOT wash the jug or attachments in a dishwasher.
Never immerse the base in water when cleaning.
• Handle blades with care especially during cleaning as they are extremely sharp!
• If the rubber seal ring in the blade assembly is also taken out to clean, make sure
to re-assemble it back properly in place to avoid leakage.
Specications
Power: 220-240V~50Hz, 500W
Capacity of Jug : 1.5 litres max.
Duty Cycle : 3 minutes ON; 3 minutes OFF
Specications may change without prior notice.
Groove
C15BW19_IB_RC_200402_grace.indd 1C15BW19_IB_RC_200402_grace.indd 1 2/4/2020 10:09 AM2/4/2020 10:09 AM

Fitting the Lid to the Jug
• It is important that the lid should be tted
and locked to the jug rst before securing the
jug onto the base. Otherwise it will be very
dicult to lock the lid to the jug when the jug
is already mounted onto the base.
• Fit the lid properly on top of the jug and turn
the lid clockwise until it is locked. To ensure
the lid and jug is interlocked securely, check
that the triangle on the lid and the one on the
handle top is align and pointing towards each
other.
Fitting the Stopper/Measuring Cup
The stopper has an integral measuring cup useful for measuring small amounts of
ingredients.
Insert the stopper in the centre of the lid.
To avoid splashing, always operate the blender with the stopper rmly in place.
Fitting the Jug to the Base Unit
• Place the jug on the base. The jug will t only
one way round.
• Turn the jug clockwise to lock, the triangle on
the handle bottom should be aligned with
the lock symbol marked on the base.
• To unlock, turn the jug anti-clockwise.
Unpacking and Product Overview
Remove all items from the packaging. Retain the packaging. If you dispose of it
please do so according to any local regulations.
Apart from the Instruction Manual, the following items are included:
First Time Use
1. Before using your blender for the rst time, wash the jug, blade assembly, lid and
stopper. Rinse thoroughly and dry.
2. Place the base unit on a stable surface, free from heat and moisture and within
easy reach of a mains socket. The mains cable should not be taut.
Preparing and lling the ingredients
1. Cut the ingredients into 25mm (1”) cubes before placing them into the jug. If the
food is very solid or dry, cut the pieces into smaller cubes.
2. Fill the blender jug with the ingredients.
3. Do not overll the jug. The maximum capacity is 1.5 litres. If you are preparing a
large quantity, use several smaller batches.
4. If the ingredients are very dry, put some liquid into the jug. You should never try
to reduce dry ingredients in the blender.
Base Unit
Blade Assembly
Speed Selector
Blender Jug
Stopper /
Measuring Cup
Handle
Safety Lid
• If items are missing or damaged, please contact Partmaster (UK only).
• Tel: [phone] for assistance.
• It is important that the lid should
be tted and locked to the jug rst
before securing the jug onto the
base.
• The jug must be secured and locked
to the base, otherwise the blender
will not operate!
• Handle blades with care especially during cleaning as they are extremely sharp!
• If the rubber seal ring in the blade assembly is also taken out to clean, make
sure to re-assemble it back properly in place to avoid leakage (see “Cleaning the
blade assembly”).
Do not put the following as they may cause damage: bones, large pieces of solid,
frozen food, or tough foods such as turnips.
The lid must be secured and locked to
the jug, otherwise the blender will not
operate!
Operation
1. Make sure the jug and the lid are secure and locked in place (see “Fitting the Lid
to the Jug” and “Fitting the Jug to the Base Unit”).
2. Set the Speed Selector to ‘0’.
3. Plug your blender into the mains socket.
Operation Mode
Continuous
(Normal)
operation
• Select the desired operating speed. There are 2 speeds.
• Move the Speed Selector progressively to the right to increase the
speed.
• When you start blending use a low speed to begin with and gradually
increase the speed if necessary.
• To stop the operation, turn the Speed Selector back to ‘0’.
Pulsed operation Use this mode when ingredients need to be blended in small repeated
bursts.
• Turn the Speed Selector to ‘P’ and hold it there for a short period of time.
• To stop the operation, release the Speed Selector which will then
automatically return to ‘0’.
During blending, you can feed in small amounts of food or liquid through the lid. To
do this:
1. Hold the lid.
2. Turn the stopper slowly to free it and then lift it out.
3. Gradually feed pieces of food or liquids into the jug.
4. Fit the stopper back when you have nished.
• Do not run the appliance continuously for more than 3 minutes. After a full 3
minute cycle allow the blender to rest for another 3 minutes before using it
again.
• Never blend very hot liquids in the blender. This is dangerous as the contents
may erupt.
• If you spill liquid on the base immediately switch o and wipe dry.
Smell may emit during rst time use, this is not a fault and will disappear after a
few uses.
After Use
After you have nished blending:
1. Set the Speed Selector to ‘0’.
2. Unplug the blender from the mains socket.
3. Hold the jug by the handle and carefully turn it anti-clockwise to release it. (This
may be easier with one hand on the base and one hand holding the jug handle).
4. To pour out the contents, rotate the lid of the jug anti-clockwise to free it and
then lift o the lid. Pour or spoon out the contents carefully.
C15BW19_IB_RC_200402_grace.indd 2C15BW19_IB_RC_200402_grace.indd 2 2/4/2020 10:09 AM2/4/2020 10:09 AM