Curtis LCDVD198 User manual

ONLY REFERENCES
SPV7050P-America OSD
LCDVD198
USA
F
ED
E
R
A
L
O
M
U
N
I
CA
T
I
O
N
S
C
O
M
I
S
O
N
C
M
M
S
I
ENGLISH
CLASS 1 LASER PRODUCT

ONLY REFERENCES
SPV7050P-America OSD
.
plug

ONLY REFERENCES
SPV7050P-America OSD
LCD TV
LCD TV
power cord
Note This equipment has been tested and found to comply with the limits for:
a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency energy and ,
if not installed and used in accordance with the instructions, may cause harmful
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the
equipment off and on,the user is encouraged to try to correct the interference by one or
more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to
is connected.
- Consult the dealer or an experienced radio TV technician for help
Shield cables must be used with this unit to ensure compliance with the
Class B FCC limits.
which the receiver
.

ONLY REFERENCES
SPV7050P-America OSD
CONTENT
MOULD 1............................................
TV MODE 7..........................................
AV AND S-VIDEO MODE 16..........................
YPBPR AND HDMI MODE 17.........................
PC MODE 18........................................
TV TROUBLESHOOTING. 21.........................
DVD OPERATION........... 22.........................
SPECIFICATIONS........... 36.........................
DISPLAY MODE............. 37.........................
ACCESSORIES.............. 39.........................

ONLY REFERENCES
SPV7050P-America OSD
MENU(Enter or exit TV menu )
TOP
POWER(Turns on or off the power supply)
EJECT button
PLAY button
-1-

ONLY REFERENCES
SPV7050P-America OSD
LEFT PANEL
S-Video input
PC-Audio input
Video/Audio L/R input
-2-
Please make sure when inserting the Disc, the unprinted
side of the disc should be facing you When inserting the
Disc incorrectly, you may damage the DVD mechanism.

ONLY REFERENCES
SPV7050P-America OSD
EXTERNAL EQUIPMENT
-3-
DVD or VCR player
HDMI
Video L R S-VIDEO

ONLY REFERENCES
SPV7050P-America OSD
REMOTE CONTROL
MUTE
AUTO
POWER
RECALL
MENU CALL
EXIT
0
9
CC
78
6
5
1234
ENTER
SOURCE
CH-
CH+ VOL-
VOL+
GOTO A-B REPEAT ANGLE
DVD-MENU TITLE AUDIO
DISPLAY ZOOM SUBTITLE
-/--
PMO
DE.SLEEP
SMO
DE.SCALER
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
18
17
20
19
22
21
AUTO
1
Auto adjusting in VGA mode.
MUTE
2Sound mute switch.
SCALER
3.To switch video format
SLEEP
4To setup the sleep timer.
Number button
5
To select program number.
6
To switch between one ,two -digit program number.or three
RECALL
7To swap between a previous program and the current
program in analog TV .
CALL
8
To display the information on screen.
SOURCE
9
To select input source: Analog TV, DVD, AV, S-Video,
YPBPR, HDMI and PC.
10 Left/Right cursor(menu adjustment )
To move leftward/ rightward or adjust the selected
item in the menu, or adjust sound volume (invalid
in DVD).
ENTER button
11
To confirm the selections.
VOL+/-
12
To increase or decrease sound volume.
12
13
To stop playing valid in DVD mode.
CC/
14
TV CC key close Caption Disc in/out ,valid in DVD mode.()/
15
To select the previous chapter or track, valid in DVD mode.
16
To select the next chapter or track in DVD mode.
17 REPEAT
To repeat playback(valid in DVD mode).
18 ANGLE
To change camera angle in DVD mode when playing
DVD disc.
19 PROGRAM
Program playback or select slide effects when playing
JPEG file.
20 AUDIO
To change the audio language and sound
track, valid in DVD mode.
21 SLOW/STEP
slow motion and step by step play mode.
22 SUBTITLE
To select language , valid in DVD .subtitle's
-4-
MTS
DVD-SETUP
PROGRAM
SLOW/STEP
-/--

ONLY REFERENCES
SPV7050P-America OSD
REMOTE CONTROL
MUTE
AUTO
POWER
RECALL
MENU CALL
EXIT
0
9
CC
78
6
5
1234
SOURCE
CH-
CH+ VOL-
VOL+
GOTO A-B REPEAT ANGLE
DVD-MENU TITLE AUDIO
DISPLAY SUBTITLE
-/--
PMO
DE.SLEEP
SMO
DE.SCALER
23
24
25
26
27
28
29
31
32
33
34
35
37
36
30
POWER
23
To switch between standby mode and power-on mode.
P-MODE
24
To select picture mode: PERSONAL, STANDARD,
MOVIE, MILD, GAME (invalid in VGA mode).
S-MODE
25
To select sound field modes: PERSONAL, STANDARD
MUSIC, VOICE, THEATRE.
39
38
EXIT
26
To exit or back previous menu.
MENU
27
Menu button.
UP/DOWN cursor
28
To select upward/downward in the menu or
change the channel, valid in analog TV .
CH+/-
29
To increase or decrease program number
valid in analog TV .
DVD-SETUP MTS/
30
Pause playing/steps playback in pause mode,
valid in DVD mode.
31
32
To fast-forwards DVD playback, valid in DVD mode.
33
To fast backward playback, valid in DVD mode.
A-B
34
To segment repeat(valid in DVD mode).
GOTO
35
To play from a certain time point(valid in DVD
mode).
DVD-MENU
37
To go to the menu of DVD menu ,valid in DVD mode
TITLE
36
To go to the menu of DVD menu ,valid in DVD mode
DISPLAY
39
To display track time in DVD mode.
ZOOM .To zoom into/out to the picture , valid in DVD mode
38
Enter DVD setup menu BTSC mode exchange key,
Exchange among MONO/STEREO/SAP
mode if BTSC available.
/
-5-
ZOOM
MTS
DVD-SETUP
PROGRAM
SLOW/STEP
ENTER

ONLY REFERENCES
SPV7050P-America OSD
REMOTE CONTROL
Remove the battery cover. Insert two SUM-4(AAA) batteries matching the -/+ polarities of
the battery to the -/+ marks inside the battery compartment, as follows:
BATTERY LIFE
Normally, battery can be used one year.
If the remote control is still invalid when very near to the TV's remote sensor window,
please use new battery.
Please use SUM-4(AAA) battery.
NOTES
Never use rechargeable battery.
Never charge, short-circuit, disassemble and heat the battery, or throw it into fire.
Pay attention not to fall or knock the remote controller, which will cause damage or
function failure to it.
Do not use new and old battery together.
If electrolyte splashes into body, please clean it with water.
CAUTION：
Please put battery in the place children cannot touch. If swallow by accident, please
contact with the local doctor immediately.
BATTERY INSTALLATION
When not using the remote controller for a long time, please take out battery to avoid
liquid leakage. Before replacing new battery, please clean the electrolyte in the remote
controller.
-6-

ONLY REFERENCES
SPV7050P-America OSD
SELECT INPUT SOURCE
BASIC OPERATION
Press button to display the input source list;
Press ▼ / ▲ button to select the input source you want to watch;
Press button to enter the input source;
SOURCE
ENTER
TV
DVD
AV
S-Video
YPBPR
HDMI
PC
1
SOURCE
Press button to display the ;
Press ▼ / ▲ button to select the MENU you want;
Press ► button to enter the sub menu;
You can press or button to save and return back to the previous menu .
MENU MAIN OSD MENU
MENU EXIT
Press ▼ / ▲ button to select the option and then press ◄ / ► to adjust the value in the sub menu;
PICTURE
PICTURE MODE
BRIGHTNESS 50
CONTRAST 50
SATURATION 50
SHARPNESS 5
TINT 50
COLOR TEMP
TINT 50
COLOR TEMP
PERSONAL
MOVE ADJUST EXIT
MENU
NORMAL
TV mode
-7-

ONLY REFERENCES
SPV7050P-America OSD
Picture Menu
Press button on the front of panel or on the remote control to display the main menu.MENU MENU
Show topics when you enter TV mode without scan program.
Press ▼ / ▲ button to select in the main menu, then press ► button to enter.Picture
Please Scan Channels!
002
CABLE
NTSC
M
TV
3. After finishing your adjustment, Press or button to save and return back to the previous menu.MENU EXIT
1. Press ▼ / ▲ button to select the option that you want to adjust in the menu.Picture
2. Press ◄ / ► button to adjust.
Contrast
Brightness
(Available Picture mode: Personal, Standard, Movie,
Mild, Game)
Press / button to select , then press ◄ / ► button to select.▼▲ Picture Mode
Picture Mode
Picture Mode
Press ▼ / ▲ button to select , then press ◄ / ► button to adjust.Brightness
Press ▼ / ▲ button to select , then press ◄ / ► button to adjust.Contrast
PICTURE
PICTURE MODE
BRIGHTNESS 50
CONTRAST 50
SATURATION 50
SHARPNESS 5
TINT 50
COLOR TEMP
50
COLOR TEMP
PERSONAL
MOVE ADJUST EXIT
NORMAL
Saturation
Press ▼ / ▲ button to select , then press ◄ / ► button to adjust.Saturation
Press ▼ / ▲ button to select , then press ◄ / ► button to adjust.Sharpness
Sharpness
Contrast 50
3
TV mode
MENU
-8-

ONLY REFERENCES
SPV7050P-America OSD
SOUND MENU
Press button on the front of panel or on the remote control to display the main menu.MENU MENU
Press ▼ / ▲ button to select , then press ◄ / ► button to adjust.Bass
Press ▼ / ▲ button to select , then press ◄ / ► button to adjust.Treble
Press ▼ / ▲ button to select then press ◄ / ► button to adjust.Balance ,
Bass
Treble
Balance
3. After finishing your adjustment, Press or button to save and return back to the previous menu.MENU EXIT
1. Press ▼ / ▲ button to select the option that you want to adjust in the menu.Sound
2. Press ◄ / ► button to adjust.
Press ▼ / ▲ button to select in the main menu, then press ► button to enter.Sound
SOUND
PERSONAL
MOVE ADJUST EXIT
MENU
SOUND MODE
BASS 50
TREBLE 50
BALANCE 0
(Available Sound mode: Personal, Standard, Music,
Voice, Theatre)
Press / button to select , then press ◄ / ► button to select.▼▲ Sound Mode
Sound Mode
4
TV mode
-9-

ONLY REFERENCES
SPV7050P-America OSD
FUNCTION MENU
Press button on the front of panel or on the remote control to display the main menu.MENU MENU
3. After finishing your adjustment, Press or button to save and return back to the previous menu.MENU EXIT
1. Press ▼ / ▲ button to select the option that you want to adjust in the menu.Function
2. Press ◄ / ► button to adjust.
Press ▼ / ▲ button to select in the main menu, then press ► button to enter.Function
Press ▼ / ▲ button to select , then press ◄ / ► button to select different language.Language
Press / button to select , then press ◄ / ► button to select.(Available Aspect Ratio: 16:9, 4:3, 14:9, Zoom).▼▲ Aspect Ratio
Language
Aspect Ratio
Sleep Timer
Press / button to select , then press ◄ / ► button to select different Sleep Timer.(Available Sleep Timer: 15Min,30Min,
45Min,60Min, 75Min, 90Min, 105Min, 120Min, Off).
▼▲ Sleep Timer
OSD Timer
Press / button to select , then press ◄ / ► button to select. (Available OSD Timer: 5 Seconds,10Seconds,
30Seconds,60Seconds,NEVER).
▼▲ OSD Timer
Blue Screen
Press / button to select , then press ◄ / ► button to select On or Off.▼▲ Blue Screen
5
Reset
Press / button to select , then press button to enter.▼▲ Reset ENTER
FUNCTION
ENGLISH
MOVE ADJUST EXIT
LANGUAGE
ASPECT RATIO
SLEEP TIMER
OSD TIMER
BLUE SCREEN
CHILD LOCK
RESET
16:9
OFF
30 SECONDS
ON
MENU
TV mode
-10-

ONLY REFERENCES
SPV7050P-America OSD
FUNCTION
MOVE ENTER BACK
MENU
Press ◄ / ► button to select press button to reset when select YES, press ENTER button to return back to
the previous menu when select NO.
YES or NO ENTER,
Child Lock
Child Lock
Press / button to select , then press button to enter.▼▲ Child Lock ENTER
Press / button to select , then press ◄ / ► button to select ON or OFF.
Input password to enter When Child Lock at “ON”, default password is “0000”.
▼▲ Child Lock
FUNCTION
MOVE ADJUST EXIT
CHILD LOCK
KEY LOCK
CHANGE CODE
MPAA
TV-PG
CAN-E
CAN-F
OFF
CHILD LOCK
OFF
NONE
E
E
MENU
Key Lock
Press / button to select , then press ◄ / ► button to select ON or OFF.▼▲ Key Lock
6
NO
YES
TV mode
-11-

ONLY REFERENCES
SPV7050P-America OSD
CHANGE CODE
Press / button to select , then press button to enter.▼▲ Change Code ENTER
Input old password at “ENTER OLD PASSWORD”.
Input new password at “ENTER NEW PASSWORD”.
Input new password again at “ENTER PASSWORD AGAIN”.
TV mode
7
MPAA
Press / button to select , then press ◄ / ► button to select . (Available : NONE, G, PG, PG-13, R, NC-17 and X).▼▲ MPAA MPAA
CAN-E
Press / button to select , then press ◄ / ► button to select. (Available : E, C, C8+, G, PG, 14+ and 18+).▼▲ CAN-E CAN-E
CAN-F
Press / button to select , then press ◄ / ► button to select. (Available : E, G, 8, 13 ans+, 16ans+ and 18ans+).▼▲ CAN-F CAN-F
TV-PG
Press ▼ / ▲ button to select , then press button to enter.TV-PG ENTER
TV-PG
SELECT ADJUST BACK
MENU
TV-Y
TV-Y7
TV-G
TV-PG
TV-14
TV-MA
TV-Y
TV-Y7
TV-G
TV-PG
TV-14
TV-MA
ALL FV L S V D
CHANGE CODE
NUMBER ENTER BACK
MENU
0~9
ENTER OLD PASSWORD
ENTER NEW PASSWORD
ENTER PASSWORD AGAIN
-12-

ONLY REFERENCES
SPV7050P-America OSD
8
FUNCTION
MOVE ADJUST EXIT
CC MODE
OFF
CC Mode
Press ▼ / ▲ button to select , then press ◄ / ► button to select different CC Mode. ( Available CC Mode: OFF, CC1, CC2,
CC3, CC4, TT1, TT2, TT3, TT4).
CC Mode
MENU
TV mode
-13-

ONLY REFERENCES
SPV7050P-America OSD
TV Menu
Press button on the front of panel or on the remote control to display the main menu.MENU MENU
Press ▼ / ▲ button to select in the main menu, then press ► button to enter.TV
3. After finishing your adjustment, Press or button to save and return back to the previous menu.MENU EXIT
1. Press ▼ / ▲ button to select the option that you want to adjust in the menu.TV
2. Press ◄ / ► button to adjust.
TV
TV MODE
AUTO SEARCH
MANUAL SEARCH
MOVE ADJUST EXIT
CABLE
Press / button to select , then press ◄ / ► button to select “AIR” or “CABLE”.▼▲ TV Mode
Press / button to select , then press button to enter.▼▲ Auto Serach ENTER
Press / button to select , then press button to enter.▼▲ Manual Serach ENTER
TV Mode
Auto Search
Manual Search
Press ◄ / ► button to select press button to auto search when select YES, press ENTER button to return
back to the previous menu when select NO.
YES or NO ENTER,
9
TV mode
TV
MOVE ENTER BACK
MENU
MENU
NO
YES
-14-

ONLY REFERENCES
SPV7050P-America OSD
TV
CHANNEL
TV SYSTEM
SKIP
AFT
FINE TUNE
MOVE ADJUST BACK
MANUAL SEARCH
001
NTSC-M
OFF
OFF
49.7MHz
Channel
TV System
Skip
AFT
Fine Tune
Press ▼ / ▲ button to select , then press ◄ / ► button to select different channel.Channel
Press ▼ / ▲ button to select , then press ◄ / ► button to select NTSC M PAL M PAL N.TV System -, -, -
Press ▼ / ▲ button to select , then press ◄ / ► button to select ON or OFF.Skip
Press ▼ / ▲ button to select , then press ◄ / ► button to select ON or OFF.AFT
Press ▼ / ▲ button to select , then press ◄ / ► button to adjust .Fine Tune
10
MENU
TV mode
-15-

ONLY REFERENCES
SPV7050P-America OSD
Picture Menu
Press button on the front of panel or on the remote control to display the main menu.MENU MENU
Press ▼ / ▲ button to select in the main menu, then press ► button to enter.Picture
3. After finishing your adjustment, Press or button to save and return back to the previous menu.MENU EXIT
1. Press ▼ / ▲ button to select the option that you want to adjust in the menu.Picture
2. Press ◄ / ► button to adjust.
PICTURE
PICTURE MODE
BRIGHTNESS 50
CONTRAST 50
SATURATION 50
SHARPNESS 5
TINT 50
COLOR TEMP
PERSONAL
MOVE ADJUST EXIT
NORMAL
Press ▼ / ▲ button to select , then press ◄ / ► button to adjust.Tint
Tint
Contrast
Brightness
(Available Picture mode: Personal, Standard, Movie,
Mild, Game)
Press / button to select , then press ◄ / ► button to select.▼▲ Picture Mode
Picture Mode
Picture Mode
Press ▼ / ▲ button to select , then press ◄ / ► button to adjust.Brightness
Press ▼ / ▲ button to select , then press ◄ / ► button to adjust.Contrast
Saturation
Press ▼ / ▲ button to select , then press ◄ / ► button to adjust.Saturation
Press ▼ / ▲ button to select , then press ◄ / ► button to adjust.Sharpness
Sharpness
Contrast 50
12
AV and S-video mode
Notes: 1. Sound
2.Function menu and description are the same as that for TV mode.
menu and description are the same as that for TV
mode .
MENU
-16-