CyberView ER1 Series User manual

User Manual
1U LCD Keyboard Drawers
15", 17" and 19" Screen Sizes
ER1 Series
ER1S Shallow Series
- Shallow Depth
- Single Console Only
- Optional KVM
ERS Series
- Designed to work with Sun
- 1U 17" or 19" Screen
- Optional KVM

Chapter 1 Getting Started
1.1 Important Safeguards..........................................................1
1.2 Regulatory Notice................................................................2
1.3 Package Contents...............................................................3
1.4 Before Installation...............................................................4
1.5 Unpacking...........................................................................4
1.6 OptionalAccessories...........................................................4
1.7 Peripheral Products.............................................................5
1.8 Structure Diagram...............................................................5
1.9 How to Install “One Man” Installation Slides....................6-7
1.10 How to Use The Slides.......................................................8
1.11 How to Use ER1 Series LCD Keyboard Drawer.................9
1.12 ERS Series (Single console)
- Use CB-6 to connect to server via USB interface........................10
1.13 ERS Series (Single console)
- Use CB-6 to connect to KVM via USB interface..........................10
1.14 ER1 Series (Single console)
- Use CE-6 to connect to server via PS/2 interface........................11
1.15 ER1 Series (Single console)
- Use CE-6 to connect to KVM via PS/2 interface..........................11
1.16 ER1 Series (Single console)
- Use CE-6 to connect to server via USB interface........................12
1.17 ER1 Series (Single console)
- Use CE-6 to connect to KVM via USB interface..........................12
Chapter 2 Operation
2.1 On-Screen Display Operation...........................................13
2.2 On-Screen Menu..............................................................14
Chapter 3 Standard Specification
3.1 Specifications....................................................................15
3.2 Keyboard & Mouse......................................................16-17
3.3 How to Use ERS Keyboard...............................................18
Contents

Contents
Chapter 4 Optional Specification
4.1 KVM Options.....................................................................19
4.2 DVI-D Option.....................................................................19
4.3 BNC + S-Video Option......................................................19
4.4 Audio Option.....................................................................20
4.5 DC Power Options............................................................20
4.6 Touchscreen Options........................................................21
Chapter 5 Troubleshooting...........................................................22
Chapter 6 Dimensions.......................................................................23

1.1 Important Safeguards Chapter 1
P. 1
Please read all of these instructions carefully before you use the device. Save this manual for future
reference.
What the warranty does not cover
■Any product, on which the serial number has been defaced, modified or removed.
■Damage, deterioration or malfunction resulting from:
□Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized product modifi-
cation, or failure to follow instructions supplied with the product.
□Repair or attempted repair by anyone not authorized by us.
□Any damage of the product due to shipment.
□Removal or installation of the product.
□Causes external to the product, such as electric power fluctuation or failure.
□Use of supplies or parts not meeting our specifications.
□Normal wear and tear.
□Any other causes which does not relate to a product defect.
■Removal, installation, and set-up service charges.

P. 2
1.2 Regulatory Notice Chapter 1
Legal Information
First English printing, October 2002
Information in this document has been carefully checked for accuracy; however, no guarantee is given to the
correctness of the contents. The information in this document is subject to change without notice. We are not
liable for any injury or loss that results from the use of this equipment.
Safety Instructions
■Unplug equipment before cleaning. Don’t use liquid or spray detergent; use a moist cloth.
■Keep equipment away from excessive humidity and heat. Preferably, keep it in an air-conditioned enviro-
nment with temperatures not exceeding 40º Celsius (104º Fahrenheit).
■When installing, place the equipment on a sturdy, level surface to prevent it from accidentally falling and
causing damage to other equipment or injury to persons nearby.
■When the drawer is in an open position, do not cover, block or in any way obstruct the gap between it and
the power supply. Proper air convection is necessary to keep it from overheating.
■Arrange the equipment’s power cord in such a way that others won’t trip or fall over it.
■If you are using a power cord that didn’t ship with the equipment, ensure that it is rated for the voltage
and current labeled on the equipment’s electrical ratings label. The voltage rating on the cord should be
higher than the one listed on the equipment’s ratings label.
■Observe all precautions and warnings attached to the equipment.
■If you don’t intend on using the equipment for a long time, disconnect it from the power outlet to prevent
being damaged by transient over-voltage.
■Keep all liquids away from the equipment to minimize the risk of accidental spillage. Liquid spilled on to
the power supply or on other hardware may cause damage, fire or electrical shock.
■Only qualified service personnel should open the chassis. Opening it yourself could damage the equip-
ment and invalidate its warranty.
■If any part of the equipment becomes damaged or stops functioning, have it checked by qualified service
personnel.
Regulatory Notices Federal Communications Commission (FCC)
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interfer-
ence in a residential installation.
Any changes or modifications made to this equipment may void the user’s authority to operate this equip-
ment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used
in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
■Reposition or relocate the receiving antenna.
■Increase the separation between the equipment and receiver.
■Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

1.3 Package Contents Chapter 1
P.3
LCD keyboard drawer x 1 pc
CB-6 USB 2-in-1 KVM cable x 1 pc (for “S” series) or
CE-6 Combo 4-in-1 KVM cable x 1 pc (for RKP series)
User manual (As of Sept 2011, all user manuals will be download-only. Physical copies are available upon request)
Power cord x 1 pc
Auto switch power adapter ( for external power version) x 1 pc
Mounting bracket x 2 pcs
M6*15mm screw x 8 pcs
M6 cage nut x 6 pcs
Cup washer x 8 pcs
5
4
2
6
1
3
7
User
Manual
16
5
4
3
2
or
7
8
9
8
9

■It is very important to locate the LCD Keyboard Drawer in a suitable environment.
■The surface for placing and fixing the LCD Keyboard Drawer should be stable and level or mounted into a suitable
cabinet.
■Make sure the place has good ventilation, is out of direct sunlight, away from sources of excessive dust, dirt, heat,
water, moisture and vibration.
■Position LCD Keyboard Drawer with respect to related facilities.
The LCD keyboard drawer comes with the standard parts shown on the package contents. Check and make sure they
are included and in good condition. If anything is missing, or damage, contact the supplier immediately.
1.5 Unpacking
1.4 Before Installation Chapter 1
P. 4
1.6 Optional Accessories
1. Combo 4-in-1 KVM cable
1.1 CAE-6 (CE-6) 6 feet
1.2 CAE-10 (CE-10)10 feet
1.3 CAE-15 (CE-15)15 feet
2. USB 2-in-1 KVM cable
2.1 CAU-6 (CB-6) 6 feet
2.2 CAU-10 (CB-10)10 feet
2.3 CAU-15 (CB-15)15 feet
3. Power Cord
3.1 IEC power cord
3.2 NEMA 5-15 power cord (US)
3.3 BS 1363 power cord (UK)
3.4 CEE 7/4 power cord (German)
3.5 AS 3112 power cord (Australia)
Please Note:
■CAU/CB cables pertain to ERS series only

P. 5
1.7 Peripheral Products Chapter 1
For 15" LCD
Please Note:
■Matrix & Combo KVM options are not available for ER1S models (please see ER2S)
Item Model No. Description
Matrix Cat6 KVM
16-Cat6-M2X / M3X / M4X
16-Cat6-M3X-IP / M4X-IP / M4X-2IP
32-Cat6-M2X / M3X / M4X
32-Cat6-M3X-IP / M4X-IP / M4X-2IP
Matrix Cat 6 16-Port KVM
Matrix IP Cat 6 16-Port KVM
Matrix Cat 6 32-Port KVM
Matrix IP Cat 6 32-Port KVM
Matrix DB-15 KVM8
8-M2X / M3X / M4X
8-M3X-IP / M4X-IP / M4X-2IP
16-M2X / M3X / M4X
16-M3X-IP / M4X-IP / M4X-2IP
Matrix DB-15 8-Port KVM
Matrix IP DB-15 8-Port KVM
Matrix DB-15 16-Port KVM
Matrix IP DB-15 16-Port KVM
Combo Cat 6 KVM
8-Cat6 / 8-Cat6-2X / 8-Cat6-IP
16-Cat6 / 16-Cat6-2X / 16-Cat6-IP
32-Cat6 / 32-Cat6-2X / 32-Cat6-IP
Combo Cat 6 8-Port KVM
Combo Cat 6 16-Port KVM
Combo Cat 6 32-Port KVM
Combo DB-15 KVM 8-USB / 8-2X / 8-IP
16-USB / 16-2X / 16-IP
Combo DB-15 8-Port KVM
Combo DB-15 16-Port KVM
PS/2 DB-15 KVM 4/ 8/ 16 4 / 8 / 16-Port PS/2 DB-15 KVM
1.8 Structure Diagram
1
2
3
5
6
Carry handle to release the 2-pt lock
LCD interchangeable module kit
“One Man” Installation Slides
LCD membrane
1
2
3
5
7
6
8
7
Membrane switch (KVM option)
Micro switch for screen auto power off
Keyboard interchangeable module kit
Mouse interchangeable module kit
4
4
8

P. 6
1.9 How to Install "One Man" Installation Slides Chapter 1
Install into rack
1
■Attach the left and right mounting bracket to rack 19”
mounting rails.
■Adjust the rear mouting bracket to fit your rack.
■M6 screw and cup washer x 6 pcs included.
Caution : Leavethe screws slightly loose until
you complete the installation in step
2
■Pick up the LCD keyboard drawer.
■Insert the LCD keyboard drawer into the mounting bracket.
■Pull and hold the left & right black arrow buttons on the rails.
■Return the LCD keyboard drawer to park position.
Left front
Right front
4
Mounting bracket
Black arrow button
Left bracket
Right bracket
Front side
Rear side

P. 7
1.9 How to Install "One Man" Installation Slides Chapter 1
Please Note:
■NBK-01 pertains only to ER1-15 / 17 / 19 & ERS-17 / 19 models
■NBK-02 pertains only to ER1S-15 / 17 / 19 models
■Installation procedures of NBK-02 are same as that of NBK-01
4
3
■Tighten all 8 pcs of M6 screw to complete the installation.
■Attach front left and right mounting ears of the LCD
keyboard drawer to vertical mounting rails.
■M6 screw and cup washer x 2 pcs included.
Complete the installation