CyberView KD1 Series User manual

User Manual
Rackmount Keyboard Drawers
KD1 Series
KD2 Series
- Shallow Depth
- Single Console Only
- Optional KVM

blank page

Chapter 1 Getting Started
1.1 Package Contents...............................................................1
1.2 Before Installation...............................................................2
1.3 Unpacking...........................................................................2
1.4 OptionalAccessories...........................................................2
1.5 Peripheral Products.............................................................3
1.6 Structure Diagram...............................................................3
1.7 Installation..........................................................................4
1.8 Connect to Server via USB Interface..................................5
1.9 Connect to KVM via USB Interface.....................................5
1.10 Connect to Server via PS/2 Interface..................................6
1.11 Connect to KVM via PS/2 Interface.....................................6
Chapter 2 Keyboard and Mouse................................................7
Chapter 3 Optional Specification
3.1 KVM Options for KD1 Series..............................................8
3.2 Environmental....................................................................8
Chapter 4 Dimensions........................................................................8
Contents

Keyboard drawer x 1 pc
Fasteners for rear L-bracket x 4 pcs
330mm rear mounting L-bracket x 1 pair
* RK-1 series mounting depth-adjustable from 210 to 800mm
* RK-2 series maximum mounting depth is 645mm
Combo keyboard cable x 1 pc
User manual (As of Sept 2011, all user manuals will be download-only. Physical copies are available upon request)
5
4
2
1
3
User
Manual
1
5
4
3
2
1.1 Package Contents Chapter 1
P.1

1. Extended rear mounting L-bracket
1.1 430mm (16.9") extended rear L-bracket for :
KD1 series up to 900mm (35.4")
KD2 series up to 745mm (29.3")
*Extended rear L-bracket can be tailor-made to length upon request
1.4 Optional Accessories
■It is very important to locate the Rackmount Keyboard Drawer in a suitable environment.
■The surface for placing and fixing the Rackmount Keyboard Drawer should be stable and level or mounted into a
suitable cabinet.
■Make sure the place has good ventilation, is out of direct sunlight, away from sources of excessive dust, dirt, heat,
water, moisture and vibration.
■Convenience for connecting the Rackmount Keyboard Drawer to the related facilities should be well considers too.
The Rackmount Keyboard Drawer comes with the standard parts shown on the package contents. Check and make sure
they are included and in good condition. If anything is missing, or damage, contact the supplier immediately.
1.3 Unpacking
1.2 Before Installation Chapter 1
P. 2

1.5 Peripheral Products Chapter 1
1.6 Structure Diagram
Adjustable rear mounting L-bracket
Membrane switch (for RK-1 with KVM option)
Keyboard interchangeable module kit
1
1
2
2
4
4
5
5
Mouse interchangeable module kit
Carry handle to release the 2-pt lock
P. 3
Item Model No. Description
Matrix Cat 6 KVM
16-Cat6-M2X / M3X / M4X
16-Cat6-M3X-IP / M4X-IP / M4X-2IP
32-Cat6-M2X / M3X / M4X
32-Cat6-M3X-IP / M4X-IP / M4X-2IP
Matrix Cat 6 16-Port KVM
Matrix IP Cat 6 16-Port KVM
Matrix Cat 6 32-Port KVM
Matrix IP Cat 6 32-Port KVM
Matrix DB-15 KVM
8-M2X / M3X / M4X
8-M3X-IP / M4X-IP / M4X-2IP
16-M2X / M3X / M4X
16-M3X-IP / M4X-IP / M4X-2IP
Matrix DB-15 8-Port KVM
Matrix IP DB-15 8-Port KVM
Matrix DB-15 16-Port KVM
Matrix IP DB-15 16-Port KVM
Combo Cat 6 KVM
8-Cat6 / 8-Cat6-2X / 8-Cat6-IP
16-Cat6 / 16-Cat6-2X / 16-Cat6-IP
32-Cat6 / 32-Cat6-2X / 32-Cat6-IP
Combo Cat 6 8-Port KVM
Combo Cat 6 16-Port KVM
Combo Cat 6 32-Port KVM
Combo DB-15 KVM 8-USB / 8-2X / 8-IP
16-USB / 16-2X / 16-IP
Combo DB-15 8-Port KVM
Combo DB-15 16-Port KVM
PS/2 DB-15 KVM 4 / 8 / 16 4 / 8 / 16-Port PS/2 DB-15 KVM
Rackmount LCD Drawer MD-15 / 17 / 19
MDW-19
1U 15" / 17" / 19" LCD Drawer
1U Widescreen 19” LCD Drawer
Rackmount LCD Panel MP-17 / 19 / 20
MPW-19 / 22
7U 17" / 8U 19" / 9U 20” LCD Panel
7U 19” / 8U 22” Widescreen LCD Panel
3
3

1.7 Installation Chapter 1
■Install each rear L-bracket using two fasteners
shown in Figure 1.
■Leavethe fasteners slightly loose
Figure 1. Install the rear L-bracket to the keyboard drawer.
■Measure the front and rear mounting depth of
the rack.
■Align each rear L-bracket to a suitable length
and tighten the fasteners shown in Figure 2.
Figure 2. Align the rear L-brackets to a suitable length for the rack.
■Fixed the keyboard drawer into the rack.
* Hardware (screws and cage nuts) for
fixing the mounting bracket to the rack is
not provided.
Figure 3. Fix the keyboard drawer into the rack.
P. 4

1.8 Connect to Server via USB Interface Chapter 1
P. 5
Please Note:
■The above diagrams pertain only to the single console LCD keyboard drawer
■For integrated KVM LCD keyboard drawers, please refer to the "All KVM" user manual
1.9 Connect to KVM via USB Interface
Caution : The keyboard drawer is hot-pluggable, but components of connected devices,
such as the servers and KVM switch, may not be hot-pluggable. Plugging and unplugging
cables while servers and KVM are powered on may cause irreversible damage to the serv-
ers, KVM and keyboard drawer. Before attempting to connect anything to the keyboard
drawer, we suggest turning off the power to all devices before connecting them. Apply
power to connected devices again only after the keyboard is receiving power. The sup-
plier is not responsible for damage caused in this way.
Figure 4. Example of connecting EKC-3 keyboard cable to server via USB interface
Figure 5. Example of connecting EKC-3 keyboard cable to KVM via USB interface

1.10 Connect to Server via PS/2 Interface Chapter 1
1.11 Connect to KVM via PS/2 Interface
P. 6
Please Note:
■The above diagrams pertain only to the single console LCD keyboard drawer
■For integrated KVM LCD keyboard drawers, please refer to the "All KVM" user manual
Caution : The keyboard drawer is hot-pluggable, but components of connected devices,
such as the servers and KVM switch, may not be hot-pluggable. Plugging and unplugging
cables while servers and KVM are powered on may cause irreversible damage to the serv-
ers, KVM and keyboard drawer. Before attempting to connect anything to the keyboard
drawer, we suggest turning off the power to all devices before connecting them. Apply
power to connected devices again only after the keyboard is receiving power. The sup-
plier is not responsible for damage caused in this way.
Figure 7. Example of connecting EKC-3 keyboard cable to KVM via PS/2 interface
Figure 6. Example of connecting EKC-3 keyboard cable to server via PS/2 interface

2.1 Keyboard & Mouse Chapter 2
P. 7
tCompact keyboard integrated
with touch pad mouse
dCompact keyboard integrated
with track ball
Bkeyboard integrated with
track ball
B
N keyboard integrated with
touch pad
N
Supporting layouts only Supporting layouts only
Supporting layouts

Model Product Dimension
(W x D x H)
Packing Dimension
(W x D x H)
Net
Weight
Gross
Weight
KD1 Series
(including KVM)
442 x 550 x 44.2 mm
17.4 x 21.6 x 1.74"
581 x 705 x 175 mm
22.9 x 27.8 x 6.9"
8 kg
18 lb
12 kg
26 lb
KD2 Series 442 x 400 x 44 mm
17.4 x 15.7 x 1.73"
500 x 582 x 100 mm
19.7 x 22.9 x 3.9"
6 kg
13 lb
8 kg
18 lb
4.1 Dimensions Chapter 4
3.1 KVM Options for KD1 Series Chapter 3
P. 8
Our KVM is designed to seamlessly integrate into the rear of our full range of keyboard drawer solutions:
■For KVM operation, please refer to the "All KVM"user manual
■Options available for multiple consoles via Matrix KVM
■Options available for high density & cost efficient Combo KVM integration with either 8 / 16 / 32 ports
■Options available for low cost PS/2 KVM
■Please ask your supplier for full KVM details
Please Note:
■Matrix & Combo KVM options are not available for KD2 models
3.2 Environmental
Operation 0˚to 50˚C Degree
Storage -5˚to 60˚C Degree
Relative Humidity 5~90%, non-condensing
Shock 10G acceleration (11ms duration)
Vibration 5~500Hz 1G RMS random vibration

ML25V01A
The company reserves the right to modify product specications without prior notice and assumes no responsibility for any error which
may appear in this publication.
All brand names, logo and registered trademarks are properties of their respective owners.
Copyright 2010 Austin Hughes Electronics Ltd. and Eclipse Rackmount, Inc. All rights reserved.