The information contained in this document is derived from the TFT LCD Display Guide provided by Zhejiang Topology Intelligent Technology Co., Ltd.
(otherwise known as Topology). All the information contained in this manual is published in good faith and for general information purpose only. Contact
technical_support@cycmotor.com for further assistance.
© 2022 CYCMOTOR LTD
Functionalities
02
Clean Trip Data
Wait 15 seconds after starting up the motor system to be able to enter the“Clean Data”menu. Long press the
MENU button to clear the previous trip data. Please note that the trip data does not automatically clear once
you restart the motor system. This is a manual process.
Error Codes
In certain circumstances, an error code may appear on your display. Contact
techinical_support@cycmotor.com for assistance. *TBC
Error Code on SW102 Display Error Code on App
1Controller Over Voltage
Controller Under Voltage
Controller Internal Error 1
Controller Over Temperature
Motor Over Temperature
Controller Internal Error 10
Controller Internal Error 2
Controller Internal Error 3
Controller Internal Error 4
Controller Internal Error 5
Controller Internal Error 6
Controller Internal Error 7
Controller Internal Error 8
Controller Internal Error 9
Hall Sensor Error
Throttle Error
Speed Sensor Error
2
4
5
6
9
10
14
15
16
17
18
23
24
26
28
29
