Cylinda DM 3158 User manual

user manual
?
service
• Nationwide service
• Visit www.cylinda.se
• Call 0771-25 25 00
declare
• Model code
• Serial number
• Purchase date
• Problem description
• Name and address
• Phonenumber
Elektroskandia Sverige AB, Cylinda, 191 83 Sollentuna
DM 3158

user manual
?
service
• Nationwide service
• Visit www.cylinda.se
• Call 0771-25 25 00
declare
• Model code
• Serial number
• Purchase date
• Problem description
• Name and address
• Phonenumber
Elektroskandia Sverige AB, Cylinda, 191 83 Sollentuna
DM 3158

Please read this user manual first!
Dear Customer,
We hope that you get the best results from your product which has been
manufactured with high quality and state-of-the-art technology. Therefore,
please read this entire user manual and all other accompanying documents
carefully before using the product and keep it as a reference for future use. If
you handover the product to someone else, give the user manual as well. Follow
all warnings and information in the user manual.
Remember that this user manual is also applicable for several other models.
Differences between models will be identified in the manual.
Explanation of symbols
Throughout this User Manual the following symbols are used:
CImportant information or
useful hints about usage.
AWarning for hazardous
situations with regard to life
and property.
BWarning for electric shock.
Packaging materials of the
product are manufactured
from recyclable materials in
accordance with our National
Environment Regulations.
Do not dispose of the packaging materials together with the domestic or other
wastes. Take them to the packaging material collection points designated by the
local authorities.

CONTENTS
1 INSTRUCTIONS
FOR SAFETY AND
ENVIRONMENT 4
General safety ...........................................4
Intended use..............................................5
Children’s safety ........................................5
Disposing of packaging material................5
Transportation of the product ....................6
Compliance with WEEE Directive and
Disposing of the Waste Product ................6
Compliance with RoHS Directive...............6
Package information..................................6
2 DISHWASHER 7
Overview....................................................7
Fan drying system .....................................8
Technical specications.............................8
3 INSTALLATION 9
Appropriate installation location.................9
Connecting water supply ...........................9
Connection to the drain ...........................10
Aquasafe+ ..............................................11
Adjusting the feet..................................... 11
Electrical connection................................11
Initial use .................................................12
4 PREPARATION 13
Tips for energy saving .............................13
Water softening system ...........................13
Adjusting the water softening system......14
Adding salt...............................................15
Detergent.................................................16
Tablet detergents.....................................17
Rinse aid..................................................18
Items not suitable for washing in the
dishwasher ..............................................19
Placing the dishes into the dishwasher ...19
Cutlery basket .........................................22
Cutlery basket .........................................22
Collapsible lower basket tines .................23
Collapsible lower basket tines .................23
Tray Wash Supports ................................24
SoftTouch Accessory ...............................24
Lower Basket Glass Holder.....................24
Lower basket multipurpose / height
adjustable service rack............................25
Upper basket height adjustable rack .......26
Lower basket bottle wire..........................26
Upper basket multipurpose service rack .26
Adjusting the height of the upper basket .27
Collapsible upper basket wires................28
Height setting with empty basket.............28
Ceiling cutlery basket ..............................29
Ceiling cutlery basket ..............................29
5 OPERATING THE
PRODUCT 30
Keys.........................................................31
Preparing the machine ............................31
Programme selection...............................31
Auxiliary functions....................................33
Programming the washing time...............34
Cancelling the programme ......................36
End of programme...................................37
Overowing warning................................37
Adjusting the amount of rinse aid ............37
InnerClean...............................................38
6 MAINTENANCE AND
CLEANING 39
Cleaning the outer surface of the product39
Cleaning the interior of the machine........39
Cleaning the lters...................................39
Cleaning the hose lter............................40
Cleaning the impellers.............................41
Lower impeller .........................................41
Upper impeller ........................................41
7 TROUBLESHOOTING 42

4DISHWASHER / USER INSTRUCTIONS
/47 EN
INSTRUCTIONS FOR SAFETY AND ENVIRONMENT
1
This section contains safety
instructions that will help to
get protected from risk of
personal injury or property
damage. Failure to follow
these instructions shall void all
warranties.
General safety
•Never place the product
on a carpet-covered floor;
otherwise, lack of airflow
beneath the product will
cause electrical parts
to overheat. This will
cause problems with your
product.
•Do not operate the product
if the power cable / plug
is damaged! Call the
Authorised Service Agent.
•Connect the product to a
grounded outlet protected
by a fuse complying with
the values in the “Technical
specifications” table. Do
not neglect to have the
grounding installation
made by a qualified
electrician. Our company
shall not be liable for any
damages that will arise
when the product is used
without grounding in
accordance with the local
regulations.
•The water supply and
draining hoses must be
securely fastened and
remain undamaged.
•Unplug the product when
not in use.
•Never wash the product by
spreading or pouring water
onto it! There is the risk of
electric shock!
•Never touch the plug with
wet hands! Never unplug
by pulling on the cable,
always pull out by grabbing
the plug.
•The product must
be unplugged during
installation, maintenance,
cleaning and repairing
procedures.
•Always have the
installation and repairing
procedures carried out by
the Authorised Service
Agent. Manufacturer
shall not be held liable for
damages that may arise
from procedures carried
out by unauthorised
persons.
•Never use chemical
solvents in the product.
They bring forth the risk of
explosion.
•When you pull the upper
and lower baskets out
completely, the door of
the product will bear all
the weight of the baskets.
Do not put other loads on
the door; otherwise, the
product may tilt.
•Never leave the door of
the product open apart
from loading and unloading
procedures.
•Do not to open the door
of the product when it is

DISHWASHER / USER INSTRUCTIONS 5 / 47 EN
instructions for safety and environment
running unless necessary.
Be careful for the rush of
hot vapour when you need
to open the door.
Intended use
•This product has been
designed for domestic use.
•It must be used to do the
domestic type dishes only.
•This appliance is intended
to be used in household
and similar applications
such as:
- Staff kitchen areas in shops,
offices and other working
environments;
- Farm houses;
- By clients in hotels, motels
and other residential type
environments;
- Bed and breakfast type
environments
•Only dishwasher safe
detergents, rinse aids and
additives must be used.
•The manufacturer waives
any responsibility arisen
from incorrect usage or
transportation.
•This appliance can be
used by children aged
from 8 years and above
and persons with reduced
physical,sensory or
mental capabilities or
lack of experience and
knowledge if they have
been given supervision or
instruction concerning use
of the appliance in a safe
way and understand the
hazards involved. Children
shall not play with the
appliance. Cleaning and
user maintenance shall
not be made by children
without supervision.
Children’s safety
•Electrical products are
dangerous for the children.
Keep children away from
the product when it is in
use. Do not let them to
tamper with the product.
•Do not forget to close the
door of the product when
leaving the room where it
is located.
•Store all detergents and
additives in a safe place
away from the reach of the
children.
Disposing of packaging
material
Packaging materials are
dangerous to children. Keep
packaging materials in a safe
place away from reach of the
children.
Packaging materials of the
product are manufactured
from recyclable materials.
Dispose of them properly
and sort in accordance with
recycled waste instructions.
Do not dispose of them with
normal domestic waste.

6DISHWASHER / USER INSTRUCTIONS
/47 EN
instructions for safety and environment
Transportation of the
product
AIf you need to move
the product, do it in
upright position and
hold from the rear
side. Slanting the
product onto its front
side may cause the
electronic parts in it
get wet and damaged.
1. Unplug the product before
transporting it.
2. Remove water drainage
and water supply
connections.
3. Drain the remaining water
in the product completely.
Compliance with WEEE
Directive and Disposing
of the Waste Product
This product complies
with EU WEEE Directive
(2012/19/EU). This
product bears a
classification symbol for waste
electrical and electronic
equipment (WEEE).This
product has been
manufactured with high quality
parts and materials which can
be reused and are suitable for
recycling. Do not dispose of
the waste product with normal
domestic and other wastes at
the end of its service life. Take
it to the collection center for
the recycling of electrical and
electronic equipment. Please
consult your local authorities to
learn about these collection
centers.
Compliance with RoHS
Directive
The product you have
purchased complies with EU
RoHS Directive (2011/65/EU).
It does not contain harmful and
prohibited materials specified
in the Directive.
Package information
Packaging materials of the
product are manufactured
from recyclable materials in
accordance with our National
Environment Regulations. Do
not dispose of the packaging
materials together with the
domestic or other wastes.
Take them to the packaging
material collection points
designated by the local
authorities.

DISHWASHER / USER INSTRUCTIONS 7 / 47 EN
DISHWASHER
2
Overview
1. Upper basket
2. Upper impeller
3. Lower impeller
4. Silverware basket
5. Door
6. Rating Label
7. Control panel
8. Detergent dispenser
9. Lower basket
10. Filters
11. Salt reservoir lid
12. Upper basket rail
13. Upper cutlery basket (depends on
model)
14. Tabletop (depends on model)
15. Fan drying system (depends on
model)
15

8DISHWASHER / USER INSTRUCTIONS
/47 EN
Dishwasher
Technical specications
Compliance to standards and test data / EC declaration of conformity
This product complies with the following EU directives;
Development, production and sales stages of this product comply with the
safety rules included in all pertaining European Community regulations.
2014/35/EU, 2014/30/EU, 93/68/EC, IEC 60436/DIN 44990, EN 50242
Power input 220-240 V, 50 Hz (see rating label)
Total power consumption 1800-2100 W (see rating label)
Heater power consumption 1800 W (see rating label)
Total current (depends on the model) 10 A (see rating label)
Drain pump power consumption 30 W (see rating label)
Water pressure 0.3 –10 bar (= 3 – 100 N/cm² = 0.01-1.0
Mpa)
CTechnical specifications may be changed without prior notice to improve
the quality of the product.
CFigures in this manual are schematic and may not match the product
exactly.
CValues stated on the markings of the product or in the printed documents
accompanying the product are obtained in the laboratory on basis of
the relevant standards. Depending on operational and environmental
conditions of the product, these values may vary.
Note for test institutions:
Data required for performance tests shall be provided upon request. Requests can
be e-mailed to the following address:
[email protected]
Do not forget to provide the code, stock and serial numbers of the product to be
tested in your request e-mail along with your contact information. Code, stock and
serial numbers of the product may be found on the type label attached to the side
wall of the door.
Fan drying system
(depends on model)
Fan drying system ensures efficient drying of your dishes.
It is normal to hear a different sound than that of washing cycle during fan
operation.

DISHWASHER / USER INSTRUCTIONS 9 / 47 EN
3INSTALLATION
Refer to the nearest Authorised
Service Agent for installation of your
product. To make the product ready
for use, make sure that the electricity,
tap water supply and water drainage
systems are appropriate before calling
the Authorised Service Agent. If they
are not, call a qualified technician
and plumber to have any necessary
arrangements carried out.
CPreparation of the location
and electrical, tap water and
waste water installations
at the place of installation
is under customer's
responsibility.
BInstallation and electrical
connections must be carried
out by the Authorised Service
Agent. Manufacturer shall
not be held responsible
for damages arising from
processes carried out by
unauthorised persons.
APrior to installation, visually
check if the product has any
defects on it. If so, do not
have it installed. Damaged
products cause risks for your
safety.
CMake sure that the water
inlet and discharge hoses
are not folded, pinched or
crushed while pushing the
product into its place after
installation or cleaning
procedures.
When placing the product, pay attention
not to damage the floor, walls, piping,
etc. Do not hold the product from its
door or panel to move it.
Appropriate installation
location
•Place the product on a solid and
flat floor that has sufficient load
carrying capacity! The product must
be installed on a flat surface in order
for the door to be closed comfortably
and securely.
•Do not install the product at places
where temperature may fall below
0ºC.
•Place the product at least 1 cm away
from the edges of other furniture.
•Place the product on a rigid floor.
Do not place it on a long pile rug or
similar surfaces.
BDo not place the product on
the power cable.
•Make sure that you select a location
that will allow you to load and unload
the dishes in a fast and comfortable
manner.
•Install the product in a place close to
the tap and the drain hole. Select the
installation location by considering
that it will not be changed after the
connections are made.
Connecting water supply
CWe recommend attaching
a filter on the house/
apartment supply water inlet
to protect the machine from
damages that may arise from
impurities (sand, dirt, rust,
etc.) coming from the urban
water supply system or from
your own water system as
well as to prevent complaints
such as yellowing or sludge
accumulation at the end of
washing.

10 DISHWASHER / USER INSTRUCTIONS
/47 EN
Installation
drainage. The length of this connection
must be min. 50 cm and max. 100 cm
from the floor. A discharge hose longer
than 4 meters causes dirty washing.
Attach the water discharge hose
to the drainpipe without bending it.
Tightly fix the water discharge hose to
the drainpipe in order to prevent any
dislocation of the water discharge hose
during operation of the product.
min 300
min 120
max 1000
min 500
Permitted water temperature: up to
25°C
The dishwasher may not be connected to
open warm water devices or flow-through
water heaters.
•Do not use old or used water inlet
hose on the new product. Use the
new water inlet hose supplied with
the product.
•Connect the water inlet hose directly
to the water tap. Pressure coming
from the tap should be minimum
0.3 and maximum 10 bars. If the
water pressure exceeds 10 bars,
a pressure relief valve should be
installed in between.
•Open the taps completely after
making the connections to check for
water leaks.
CUse a screw-on hose
connector to connect the
water inlet hose to a water
tap with a ¾ inch external
thread. If required, use a
filter insert to filter deposits
from the pipes.
AFor your safety, close the
water inlet tap completely
after the washing programme
is over.
Connection to the drain
Water discharge hose can directly be
connected to the drain hole or sink’s
CDrainpipe must be connected
to the sewage system and it
should not be connected to
any surface water.

DISHWASHER / USER INSTRUCTIONS 11 / 47 EN
Installation
Electrical connection
Connect the product to a grounded
outlet protected by a fuse complying
with the values in the “Technical
specifications” table. Our company shall
not be liable for any damages that will
arise when the product is used without
grounding in accordance with the local
regulations.
•Connection must comply with
national regulations.
•Power cable plug must be within
easy reach after installation.
BUnplug the product after the
washing programme is over.
•The voltage and allowed fuse or
breaker protection are specified
in the “Technical specifications”
section. If the current value of the
fuse or breaker in the house is less
than 16 Amps, have a qualified
electrician install a 16 Amp fuse.
•The specified voltage must be
equal to your mains voltage.
•Do not make connections via
extension cables or multi-plugs.
BDamaged power cables
must be replaced by the
Authorised Service Agent.
BIf your dishwasher is
equipped with internal
illumination, lamp should
only be replaced by the
Authorised Service Agent
in case of failures that may
occur on the lamp.
Aquasafe+
(depends on model)
The Aquasafe+ system protects against
water leaks that may occur at the hose
inlet.Water contact with the valve box of
the system must be avoided to prevent
damage to the electrical system. If the
Aquasafe+ system is damaged, unplug
the product and call the Authorised
Service Agent.
AAs the hose set contains
electrical connections and
assemblies, never shorten
or lengthen the hose with
extension hoses.
Adjusting the feet
If the door of the product cannot be
closed properly or if the product swings
when you push it slightly, then you need
to adjust the feet of the product. Adjust
the feet of the product as illustrated in
the installation manual supplied with the
product.

12 DISHWASHER / USER INSTRUCTIONS
/47 EN
Installation
BIf the product has a failure,
it should not be operated
unless it is repaired by the
Authorised Service Agent!
There is the risk of electric
shock!
Initial use
Before starting to use the product, make
sure that all preparations are made
in accordance with the instructions in
sections “Important safety instructions”
and “Installation”.
•To prepare the product to do the
dishes, perform first operation
in the shortest programme with
detergent while the machine is
empty. During the initial use, fill the
salt reservoir with 1 litre of water
prior to filling it with salt.
AThere might be a small
amount of water left in the
product after factory quality
control tests. This has no
harm on the product.

DISHWASHER / USER INSTRUCTIONS 13 / 47 EN
PREPARATION
4
Tips for energy saving
Following information will help you use
the product in an ecological and energy-
efficient manner.
Wipe away any coarse food remnants
on the dishes before putting them in the
product.
Operate the product after filling it
completely.
When selecting a programme, consider
the table of "Programme data and
average consumption values".
Do not put more detergent than
suggested on the detergent package.
Water softening system
The product is equipped with a water
softening system which reduces the
hardness of incoming water. This
system softens the supply water to a
level that will allow washing the dishes
with the required quality.
CThe mains water hardness
must be softened if it is
over 7°dH. Otherwise,
hardness ions will accumulate
on the dishes that are
washed and may affect the
washing, rinsing and drying
performances of the machine.

14 DISHWASHER / USER INSTRUCTIONS
/47 EN
Preparation
Adjusting the water softening system
Cleaning, rinsing and drying performance of your dishwasher will increase when
water softening system is adjusted properly.
Adjust the new water hardness level according to the Water hardness level
instruction in this booklet.
Use the test strip supplied with the product according to the steps given below to
determine hardness level of your supply water.
ab cde f
Remove the test
strip from the
packet.
Turn on the tap and
let the water run for
about a minute.
Hold the test strip in
the water for about
a second.
Remove the test
strip from the water
and shake it.
Wait for 1 minute. The test strip shows
you the hardness
level.
1 Second
1 Minute
1 min.
After determining hardness level of the supply water:
1. Turn on the machine, press Time Delay and P+/P keys simultaneously. After the
countdown (3,2,1) is displayed keep the keys pressed for a while.
2. Press P+/P key to activate the (r..) position.
3. Using Time Delay key, adjust water hardness level according to the hardness of
the supply water. See “Water hardness level adjustment table” for correct setting.
4. Press On / Off key to save the setting.
Water hardness level adjustment table
Hardness
Level
English Water
Hardness °dE
German Water
Hardness °dH
French Water
Hardness °dF Water Hardness Level Indicator
0th Level 0-5 0-4 0-8 Press the Time Delay key to switch the water hardness level
to position 1. (r1)
1st Level 6-9 5-7 9-13
2nd Level 10-15 8-12 14-22 Press the Time Delay key to switch the water hardness level
to position 2. (r2)
3rd Level 16-19 13-15 23-27 Press the Time Delay key to switch the water hardness level
to position 3. (r3)
4th Level 20-24 16-19 28-34 Press the Time Delay key to switch the water hardness level
to position 4. (r4)
5th Level 25-62 20-50 35-90 Press the Time Delay key to switch the water hardness level
to position 5. (r5)
If the hardness level of the supply water is above 90 °dF or if you are using well
water, then it is recommended to use water purification devices and special filters.
If the hardness level of the supply water is below 13°dF, there is no need to use
salt in your dishwasher. If this is the case, “No Salt Warning Indicator” (if any)
illuminates continuously on the panel of your machine.
If the water hardness level adjustment is set to level 1, the “No salt warning
indicator” will illuminate continuously although it is not necessary to use salt. If you

DISHWASHER / USER INSTRUCTIONS 15 / 47 EN
Preparation
1. Firstly, take the lower basket out to
add softening salt.
2. Turn the salt reservoir lid counter-
clockwise to open it (A, B).
3. Add 1 litre of water to salt reservoir
of your machine only in initial use
(C).
Adding salt
Water softening system needs to be
regenerated in order for the product
operates with the same performance
continuously. Dishwasher salt is used
for this purpose.
CUse only special softening
salts produced particularly
for the dishwashers in your
machine.
CIt is recommended to use
granule- or powder-formed
softening salts in the
water softening system.
Do not use salts that do
not completely dissolve in
water such as table salt or
rock salt. Otherwise the
performance of the system
may deteriorate in time.
CSalt reservoir will be filled
with water when you start
the product. For this reason,
add salt before operating the
machine.
use salt under this condition, salt will not
be consumed and the Salt indicator will
not illuminate.
CIf you move your house,
it is necessary to readjust
water hardness level of your
machine by considering the
information given above
according to the hardness
level of the supply water
in your new location. Your
machine will display the
most recently adjusted water
hardness level.

16 DISHWASHER / USER INSTRUCTIONS
/47 EN
Preparation
Detergent
You can use powder, liquid/gel or tablet
detergents in the machine.
AOnly use in the machine
the detergents produced
particularly for use
with dishwashers. We
recommend you not to use
detergents that contain
chlorine and phosphate
as they are harmful for the
environment.
Adding detergent
CPay attention to the warnings
on the detergent packaging
to get better washing and
drying results. Contact the
manufacturer of the detergent
for further questions.
ADo not put solvents into the
detergent dispenser. There is
the risk of explosion!
Put the detergent into the detergent
dispenser just before operating the
machine as illustrated below.
1. Push the latch to right to open the
detergent dispenser lid (A).
4. Fill the salt reservoir with salt by
using the salt funnel (D). To speed
up dissolution rate of salt in water,
stir it with a spoon.
CYou can put about 2 kg of
softening salt into the salt
reservoir.
5. Replace the lid and tighten it when
the reservoir is full.
CYou need to add salt right
before starting the machine.
Thus, the overflowing
salty water will be flushed
immediately, preventing the
risk of corrosion in machine.
In cases where you would not
start washing immediately,
run your machine empty in
the shortest program.
CSince different salt brands
in the market have different
particle sizes and since the
water hardness may vary,
dissolution of the salt in water
may take a couple of hours.
Therefore, Salt Indicator
remains on for a while after
adding salt into the machine.

DISHWASHER / USER INSTRUCTIONS 17 / 47 EN
Preparation
3. Push the lid of the detergent
dispenser to close it. A "click" will be
heard when the lid is closed.
1
2
3
CUse powder or liquid/
gel detergent in short
programmes without
prewash since the solubility
of the tablet detergent
changes depending on the
temperature and time.
Tablet detergents
In addition to the conventional tablet
detergents, there are also commercially
available detergent tablets that show
water softening salt and/or rinse aid
effect. Some types of these detergents
contain special-purpose components
such as glass and stainless steel
protectors. These tablets show their
effects up to a certain water hardness
2. Put suggested amount of powder,
liquid/gel or tablet detergent in the
reservoir.
CInside the detergent
dispenser there are level
markings that help you
use appropriate amount of
powder detergent. When
brimful, detergent dispenser
will contain 45 cm³ of
detergent. Fill detergent up to
15 cm³ or 25 cm³ level marks
in the detergent dispenser
according to fullness of
the machine and/or soiling
degree of the dishes. One
tablet is enough if you are
using detergent tablets.

18 DISHWASHER / USER INSTRUCTIONS
/47 EN
Preparation
level (21°dH). Water softening salt and
rinse aid must also be used together
with the detergent if the water hardness
level is above the mentioned level.
CThe best washing
performance in dishwashers
is obtained by using
detergent, rinse aid and water
softening salt individually.
CObserve the instructions of
the detergent manufacturer
on the package when using
tablet detergents.
CContact the detergent
manufacturer if your dishes
are wet and/or if you notice
limescale spots particularly
on your glasses after the
washing programme is
over when using a tablet
detergent.
When you switch to powder
detergent from tablet detergent:
1. Make sure that salt and rinse aid
reservoirs are full.
2. Set the water hardness to the
highest level and perform an empty
run.
3. After the empty washing cycle,
review the user manual and
readjust the water hardness level so
as to suit the water supply.
4. Make the appropriate rinse aid
settings.
Rinse aid
CThe rinse aid used in
dishwashers is a special
combination that aims to
increase drying efficiency and
prevent water or lime stains
on the washed items. For this
reason, care must be paid
to have rinse aid in the rinse
aid reservoir and to use rinse
aids produced specially for
dishwashers only.
1. Open the lid of the rinse aid
reservoir with the help of the latch.
2. Fill the reservoir until “MAX” level.

DISHWASHER / USER INSTRUCTIONS 19 / 47 EN
Preparation
3. Slightly press the point (B) of the
reservoir lid to close it.
4. If there are stains on tableware
items after washing, level must be
increased and if there is a blue trace
after wiping them by hand, it must
be decreased. This is set to position
3 as factory default.
CThe rinse aid adjustment is
described under "Adjusting
the amount of rinse aid" in
the section for operating the
machine.
CWipe clean any spilled
rinse aid outside the
reservoir. Rinse aid that
spilled accidentally will
cause foaming and it will
eventually decrease washing
performance.
Items not suitable for washing
in the dishwasher
•Never wash dishes soiled by
cigarette ash, candle remnants,
polish, dyestuff, chemicals, etc. in
your dishwasher.
•Do not wash silverware and cutlery
with wooden or bone stems, glued
pieces, or pieces that are not
resistant to heat, as well as copper
and tin-plated containers in the
dishwasher.
CDecorative prints of
chinaware as well as
aluminum and silver items
may get discoloured or
tarnished after washing in
the dishwasher just as it
happens in handwashing as
well. Some delicate glass
types and crystals may
become dull in time. We
strongly recommend you
to check if the tableware
you are going to purchase
is suitable for washing
especially in the dishwasher.
Placing the dishes into the
dishwasher
You can use your dishwasher in the
optimum way with respect to energy
consumption and washing and drying
performance only if you place the
dishes in an orderly way.
•Wipe away any coarse food
remnants (bones, seeds, etc.) on
the dishes before placing them in
the dishwasher.
•Place thin, narrow pieces in the
middle sections of baskets if
possible.
•Place the heavily soiled and bigger
items in the lower basket and
smaller, delicate and light items in
the upper basket.
•Place the hollowed dishes such as
bowls, glasses and pans upside
down in the dishwasher. Thus,
accumulation of water in deep
hollows is prevented.