Cylinda DM 3115 FI User manual

user manual
?
service
• Nationwide service
• Visit www.cylinda.se
• Call 0771-25 25 00
declare
• Model code
• Serial number
• Purchase date
• Problem description
• Name and address
• Phonenumber
Elektroskandia Sverige AB, Cylinda, 191 83 Sollentuna
DM 3115 FI

user manual
?
service
• Nationwide service
• Visit www.cylinda.se
• Call 0771-25 25 00
declare
• Model code
• Serial number
• Purchase date
• Problem description
• Name and address
• Phonenumber
Elektroskandia Sverige AB, Cylinda, 191 83 Sollentuna
DM 3115 FI

Explanation of symbols
Throughout this User Manual the following symbols are used:
C
Important information or useful
hints about usage.
A
Warning for hazardous
situations with regard to life and
property.
B
Warning for electric shock.
Packaging materials of the
product are manufactured
from recyclable materials in
accordance with our National
Environment Regulations.
Do not dispose of the packaging materials together with the domestic or other
wastes. Take them to the packaging material collection points designated by the local
authorities.
Please read this user manual first!
Dear Customer,
We hope that you get the best results from your product which has been manufactured
with high quality and state-of-the-art technology. Therefore, please read this entire
user manual and all other accompanying documents carefully before using the product
and keep it as a reference for future use. If you handover the product to someone else,
give the user manual as well. Follow all warnings and information in the user manual.
Remember that this user manual is also applicable for several other models. Differences
between models will be identified in the manual.
This product was manufactured using the latest technology in environmentally friendly conditions.

CONTENTS
1 INSTRUCTIONS FOR SAFETY
AND ENVIRONMENT 4
General safety.............................................. 4
Intended use................................................. 4
Children’s safety .......................................... 5
Disposing of packaging material............... 5
Transportation of the product .................. 5
Compliance with WEEE Directive and
Disposing of the Waste Product................ 6
Compliance with RoHS Directive............... 6
Package information................................... 6
2 DISHWASHER 7
Overview ....................................................... 7
Fan drying system ....................................... 8
Technical specifications............................. 8
3 INSTALLATION 9
Appropriate installation location.............. 9
Connecting water supply ........................... 9
Aquasafe+ ..................................................10
Connection to the drain............................ 10
Adjusting the feet ..................................... 11
Electrical connection................................. 11
Initial use..................................................... 12
4 PREPARATION 13
Tips for energy saving .............................. 13
Water softening system........................... 13
Adjusting the water softening system.. 13
Adding salt .................................................. 15
Detergent.................................................... 16
Adding detergent ...................................... 16
Combined tablet detergents ................... 17
Rinse aid ......................................................18
Cutlery basket ............................................ 21
Cutlery basket ............................................ 21
Collapsible lower basket tines................. 21
Collapsible lower basket tines................. 22
Collapsable lower basket wires (2
pieces) ......................................................... 23
Collapsible upper basket tines ................ 23
Upper basket rack......................................24
Adjusting the height of the upper
basket ..........................................................24
Adjusting the height of loaded upper
basket .......................................................... 25
Height setting with empty basket..........26
5 OPERATING THE PRODUCT27
Keys..............................................................28
Function keys .............................................28
Preparing the machine .............................28
Programme selection................................28
Auxiliary functions ....................................30
Scheduling the washing time.................. 31
Starting the programme........................... 32
Cancelling the programme....................... 32
Salt indicator ( ) ..................................... 33
Rinse Aid indicator ( ) ............................ 33
End of programme ..................................... 33
Water cut-o warning .............................. 33
Overowing warning ................................ 33
InnerClean...................................................34
6 MAINTENANCE AND
CLEANING 35
Cleaning the outer surface of the
product ........................................................ 35
Cleaning the interior of the machine ..... 35
Cleaning the filters .................................... 35
Cleaning the hose filter ............................36
Cleaning the impellers .............................. 37
Lower impeller ........................................... 37
Upper impeller ........................................... 37
7 TROUBLESHOOTING 38

4 //43 EN
instructions for safety and environment
1
This section contains safety
instructions that will help to
get protected from risk of
personal injury or property
damage. Failure to follow
these instructions shall void all
warranties.
General safety
•Never place the product
on a carpet-covered floor;
otherwise, lack of airflow
beneath the product will
cause electrical parts to
overheat. This will cause
problems with your product.
•Do not operate the product
if the power cable / plug is
damaged! Call the Authorised
Service Agent.
•Connect the product to a
grounded outlet protected
by a fuse complying with
the values in the “Technical
specifications” table. Do
not neglect to have the
grounding installation made
by a qualified electrician.
Our company shall not be
liable for any damages that
will arise when the product
is used without grounding
in accordance with the local
regulations.
•The water supply and
draining hoses must be
securely fastened and remain
undamaged.
•Unplug the product when not
in use.
•Never wash the product by
spreading or pouring water
onto it! There is the risk of
electric shock!
•Never touch the plug with
wet hands! Never unplug by
pulling on the cable, always
pull out by grabbing the plug.
•The product must
be unplugged during
installation, maintenance,
cleaning and repairing
procedures.
•Always have the installation
and repairing procedures
carried out by the Authorised
Service Agent. Manufacturer
shall not be held liable for
damages that may arise from
procedures carried out by
unauthorised persons.
•Never use chemical solvents
in the product. They bring
forth the risk of explosion.
•When you pull the upper
and lower baskets out
completely, the door of the
product will bear all the
weight of the baskets. Do not
put other loads on the door;
otherwise, the product may
tilt.
•Never leave the door of
the product open apart
from loading and unloading
procedures.
•Do not to open the door
of the product when it is
running unless necessary.
Be careful for the rush of hot
vapour when you need to
open the door.
Intended use
•This product has been
designed for domestic use.

/ 5 / 43 EN
instructions for safety and environment
•It must be used to do the
domestic type dishes only.
•This appliance is intended
to be used in household and
similar applications such as:
- Staff kitchen areas in shops,
offices and other working
environments;
- Farm houses;
- By clients in hotels, motels
and other residential type
environments;
- Bed and breakfast type
environments
•Only dishwasher safe
detergents, rinse aids and
additives must be used.
•The manufacturer waives
any responsibility arisen
from incorrect usage or
transportation.
•The service life of your
product is 10 years. During
this period, original spare
parts will be available to
operate the product properly.
•This appliance can be used by
children aged from 8 years
and above and persons with
reduced physical,sensory
or mental capabilities or
lack of experience and
knowledge if they have
been given supervision or
instruction concerning use
of the appliance in a safe
way and understand the
hazards involved. Children
shall not play with the
appliance. Cleaning and user
maintenance shall not be
made by children without
supervision.
Children’s safety
•Electrical products are
dangerous for the children.
Keep children away from the
product when it is in use. Do
not let them to tamper with
the product.
•Do not forget to close the
door of the product when
leaving the room where it is
located.
•Store all detergents and
additives in a safe place
away from the reach of the
children.
Disposing of
packaging material
Packaging materials are
dangerous to children. Keep
packaging materials in a safe
place away from reach of the
children.
Packaging materials of the
product are manufactured from
recyclable materials. Dispose
of them properly and sort in
accordance with recycled waste
instructions. Do not dispose
of them with normal domestic
waste.
Transportation of the
product
A
If you need to move the
product, do it in upright
position and hold from
the rear side. Slanting
the product onto its
front side may cause
the electronic parts in it
get wet and damaged.

6 //43 EN
instructions for safety and environment
1. Unplug the product before
transporting it.
2. Remove water drainage and
water supply connections.
3. Drain the remaining water in
the product completely.
Compliance with
WEEE Directive and
Disposing of the
Waste Product
This product complies with
EU WEEE Directive
(2012/19/EU). This product
bears a classification
symbol for waste electrical and
electronic equipment (WEEE).
This product has been
manufactured with high quality
parts and materials which can be
reused and are suitable for
recycling. Do not dispose of the
waste product with normal
domestic and other wastes at the
end of its service life. Take it to
the collection center for the
recycling of electrical and
electronic equipment. Please
consult your local authorities to
learn about these collection
centers.
Compliance with RoHS
Directive
The product you have purchased
complies with EU RoHS Directive
(2011/65/EU). It does not contain
harmful and prohibited materials
specified in the Directive.
Package information
Packaging materials of the
product are manufactured
from recyclable materials in
accordance with our National
Environment Regulations. Do
not dispose of the packaging
materials together with the
domestic or other wastes. Take
them to the packaging material
collection points designated by
the local authorities.

/ 7 / 43 EN
Dishwasher
2
Overview
1. Upper basket
2. Upper impeller
3. Lower impeller
4. Silverware basket
5. Rating Label
6. Door
7. Control panel
8. Detergent dispenser
9. Lower basket
10. Filters
11. Salt reservoir lid
12. Upper basket rail
13. Tabletop (depends on model)
14. Fan drying system (depends on model)
14

8 //43 EN
Dishwasher
Technical specications
Compliance to standards and test data / EC declaration of conformity
This product complies with the following EU directives;
Development, production and sales stages of this product comply with the safety
rules included in all pertaining European Community regulations.
2014/35/EU, 2014/30/EU, 93/68/EC, IEC 60436/DIN 44990, EN 50242
Power input 220-240 V, 50 Hz (see rating label)
Total power consumption 1800-2100 W (see rating label)
Heater power consumption 1800 W (see rating label)
Total current (depends on the model) 10 A (see rating label)
Drain pump power consumption 30 W (see rating label)
Water pressure 0.3 –10 bar (= 3 – 100 N/cm² = 0.01-1.0
Mpa)
C
Technical specifications may be changed without prior notice to improve the
quality of the product.
C
Figures in this manual are schematic and may not match the product exactly.
C
Values stated on the markings of the product or in the printed documents
accompanying the product are obtained in the laboratory on basis of the
relevant standards. Depending on operational and environmental conditions of
the product, these values may vary.
Note for test nsttutons:
Data required for performance tests shall be provided upon request. Requests can be
e-mailed to the following address:
dshwasher@standardloadng.com
Do not forget to provide the code, stock and serial numbers of the product to be tested in
your request e-mail along with your contact information. Code, stock and serial numbers of
the product may be found on the type label attached to the side wall of the door.
Fan drying system
(depends on model)
Fan drying system ensures efficient drying of your dishes.
It is normal to hear a different sound than that of washing cycle during fan operation.

/ 9/ 43 EN
3Installation
Refer to the nearest Authorised Service
Agent for installation of your product. To
make the product ready for use, make sure
that the electricity, tap water supply and
water drainage systems are appropriate
before calling the Authorised Service
Agent. If they are not, call a qualified
technician and plumber to have any
necessary arrangements carried out.
C
Preparation of the location
and electrical, tap water and
waste water installations at the
place of installation is under
customer's responsibility.
B
Installation and electrical
connections must be carried
out by the Authorised Service
Agent. Manufacturer shall
not be held responsible
for damages arising from
processes carried out by
unauthorised persons.
A
Prior to installation, visually
check if the product has any
defects on it. If so, do not have
it installed. Damaged products
cause risks for your safety.
C
Make sure that the water inlet
and discharge hoses are not
folded, pinched or crushed
while pushing the product into
its place after installation or
cleaning procedures.
When placing the product, pay attention
not to damage the floor, walls, piping, etc.
Do not hold the product from its door or
panel to move it.
Appropriate installation
location
•Place the product on a solid and flat
floor that has sufficient load carrying
capacity! The product must be
installed on a flat surface in order for
the door to be closed comfortably and
securely.
•Do not install the product at places
where temperature may fall below
0ºC.
•Place the product at least 1 cm away
from the edges of other furniture.
•Place the product on a rigid floor. Do
not place it on a long pile rug or similar
surfaces.
B
Do not place the product on the
power cable.
•Make sure that you select a location
that will allow you to load and unload
the dishes in a fast and comfortable
manner.
•Install the product in a place close to
the tap and the drain hole. Select the
installation location by considering
that it will not be changed after the
connections are made.
Connecting water supply
C
We recommend attaching a
filter on the house/apartment
supply water inlet to protect
the machine from damages
that may arise from impurities
(sand, dirt, rust, etc.) coming
from the urban water supply
system or from your own water
system as well as to prevent
complaints such as yellowing or
sludge accumulation at the end
of washing.

10 //43 EN
Installation
Permtted water temperature: up
to 25°C
The dishwasher may not be connected to
open warm water devices or flow-through
water heaters.
•Do not use old or used water inlet
hose on the new product. Use the new
water inlet hose supplied with the
product.
•Connect the water inlet hose directly
to the water tap. Pressure coming
from the tap should be minimum 0.3
and maximum 10 bars. If the water
pressure exceeds 10 bars, a pressure
relief valve should be installed in
between.
•Open the taps completely after
making the connections to check for
water leaks.
C
Use a screw-on hose connector
to connect the water inlet hose
to a water tap with a ¾ inch
external thread. If required, use
a filter insert to filter deposits
from the pipes.
A
For your safety, close the water
inlet tap completely after the
washing programme is over.
Aquasafe+
(depends on model)
The Aquasafe+ system protects against
water leaks that may occur at the hose
inlet.Water contact with the valve box of
the system must be avoided to prevent
damage to the electrical system. If the
Aquasafe+ system is damaged, unplug the
product and call the Authorised Service
Agent.
A
As the hose set contains
electrical connections and
assemblies, never shorten
or lengthen the hose with
extension hoses.
Connection to the drain
Water discharge hose can directly be
connected to the drain hole or sink’s
drainage. The length of this connection
must be min. 50 cm and max. 100 cm from
the floor. A discharge hose longer than 4
meters causes dirty washing.
Attach the water discharge hose to the
drainpipe without bending it. Tightly fix
the water discharge hose to the drainpipe
in order to prevent any dislocation of the
water discharge hose during operation of
the product.

/ 11/43 EN
Installation


         





C
Drainpipe must be connected
to the sewage system and it
should not be connected to any
surface water.
Adjusting the feet
If the door of the product cannot be closed
properly or if the product swings when you
push it slightly, then you need to adjust
the feet of the product. Adjust the feet of
the product as illustrated in the installation
manual supplied with the product.
Electrical connection
Connect the product to a grounded outlet
protected by a fuse complying with the
values in the “Technical specifications”
table. Our company shall not be liable for
any damages that will arise when the
product is used without grounding in
accordance with the local regulations.
•Connection must comply with national
regulations.
•Power cable plug must be within easy
reach after installation.
B
Unplug the product after the
washing programme is over.
•The voltage and allowed fuse or
breaker protection are specified in
the “Technical specifications” section.
If the current value of the fuse or
breaker in the house is less than 16
Amps, have a qualified electrician
install a 16 Amp fuse.
•The specified voltage must be equal to
your mains voltage.
•Do not make connections via
extension cables or multi-plugs.
B
Damaged power cables must
be replaced by the Authorised
Service Agent.
B
If your dishwasher is equipped
with internal illumination, lamp
should only be replaced by the
Authorised Service Agent in
case of failures that may occur
on the lamp.
B
If the product has a failure, it
should not be operated unless
it is repaired by the Authorised
Service Agent! There is the risk
of electric shock!

12 //43 EN
Installation
Initial use
Before starting to use the product, make
sure that all preparations are made in
accordance with the instructions in
sections “Important safety instructions”
and “Installation”.
•To prepare the product to do the
dishes, perform first operation in the
shortest programme with detergent
while the machine is empty. During
the initial use, fill the salt reservoir
with 1 litre of water prior to filling it
with salt.
A
There might be a small amount
of water left in the product
after factory quality control
tests. This has no harm on the
product.

/ 13/43 EN
Preparation
4
Tips for energy saving
Following information will help you use
the product in an ecological and energy-
efficient manner.
Wipe away any coarse food remnants on
the dishes before putting them in the
product. Operate the product after filling it
completely. When selecting a programme,
consider the table of “Programme data and
average consumption values”.
Do not put more detergent than suggested
on the detergent package.
Water softening system
C
Your dishwasher requires soft
water. If the hardness of the
water is above 6°dH, the water
must be softened and descaled.
Otherwise, ions that create
the hardness will accumulate
on the surfaces of the dishes
and may adversely affect the
washing, shining and drying
performances of the product.
The product is equipped with a water
softening system which reduces the
hardness of incoming water. This system
softens the supply water that enters
into the product to a level that will allow
washing the dishes with the required
quality.
Adjusting the water
softening system
Cleaning, rinsing and drying performance of
your dishwasher will increase when water
softening system is adjusted properly.
Adjust the new water hardness level
according to the Water hardness level
instruction in this booklet.

14 //43 EN
Installation
Use the test strip supplied with the product according to the steps given below to
determine hardness level of your supply water.
ab cde f
Remove the test
strip from the
packet.
Turn on the tap and
let the water run for
about a minute.
Hold the test strip in
the water for about
a second.
Remove the test
strip from the water
and shake it.
Wait for 1 minute. The test strip shows
you the hardness
level.
1 Second
1 Minute
1 min.
After determining hardness level of the supply water:
1. Turn on the machine, press Time Delay and P+/P keys simultaneously. After the
countdown (3,2,1) is displayed keep the keys pressed for a while.
2. Press P+/P key to activate the (r..) position.
3. Using Time Delay key, adjust water hardness level according to the hardness of the
supply water. See “Water hardness level adjustment table” for correct setting.
4. Press On / Off key to save the setting.
Water hardness level adjustment table
Hardness
Level
English Water
Hardness °dE
German Water
Hardness °dH
French Water
Hardness °dF Water Hardness Level Indicator
0th Level 0-5 0-4 0-8 Press the Time Delay key to switch the water hardness level
to position 1. (r1)
1st Level 6-9 5-7 9-13
2nd Level 10-15 8-12 14-22 Press the Time Delay key to switch the water hardness level
to position 2. (r2)
3rd Level 16-19 13-15 23-27 Press the Time Delay key to switch the water hardness level
to position 3. (r3)
4th Level 20-24 16-19 28-34 Press the Time Delay key to switch the water hardness level
to position 4. (r4)
5th Level 25-62 20-50 35-90 Press the Time Delay key to switch the water hardness level
to position 5. (r5)
If the hardness level of the supply water is above 90 °dF or if you are using well water, then
it is recommended to use water purification devices and special filters.
If the hardness level of the supply water is below 13°dF, there is no need to use salt in your
dishwasher. If this is the case, “No Salt Warning Indicator” (if any) illuminates continuously
on the panel of your machine.
If the water hardness level adjustment is set to level 1, the “No salt warning indicator” will
illuminate continuously although it is not necessary to use salt. If you use salt under this
condition, salt will not be consumed and the Salt indicator will not illuminate.

/ 15/43 EN
Preparation
C
Salt reservoir will fill with water
when you start the product.
Therefore, add the softening
salt before starting the
machine.
C
Before initial use, fill the water
softening system with 1 litre of
water (C).
C
If you move your house, it is
necessary to readjust water
hardness level of your machine
by considering the information
given above according to the
hardness level of the supply
water in your new location.
Your machine will display the
most recently adjusted water
hardness level.
Adding salt
Water softening system needs to be
regenerated in order that the product
operates with the same performance
continuously. Dishwasher salt is used for
this purpose.
C
Use only special softening salts
produced particularly for the
dishwashers in your machine.
C
We recommend using granular
or powder softening salts. Do
not use salts that are insoluble
in water such as table salt or
common salt. Performance of
water softening system may
get worse in time.
C
Salt reservoir will fill with water
when you start the product.
Therefore, add the softening
salt before starting the
machine.
1. First take the lower basket out to add
softening salt.
2. Turn the salt reservoir lid counter
clockwise to open it (A, B).

16 //43 EN
Preparation
Detergent
You can use powder, liquid/gel and tablet
detergents in the machine.
C
Only use the detergents
produced particularly for use
with dishwashers. Never
use washing up liquids. We
recommend you not to use
detergents that contain
chlorine and phosphate as
they are harmful for the
environment.
Adding detergent
C
Refer to the “Programme
Table” to determine the correct
amount of detergent for the
selected programme.
C
In order to have good washing
and drying results, always
follow the instructions on the
detergent packaging. If you
have further questions, we
recommend to contact with the
producer of the detergent.
A
Do not put solvents into the
detergent dispenser. There is
risk of explosion!
Put the detergent into the detergent
dispenser just before operating the
machine as illustrated below.
3. Fill the salt reservoir with salt by using
salt funnel (D). To speed up dissolution
rate of salt in water, stir it with a
spoon.
C
You can put about 2 kg of
dishwasher salt into the salt
reservoir.
4. Replace the lid and tighten it securely
when the reservoir is full.
5. If you will not start a washing
programme immediately after adding
the salt, run the machine empty in the
shortest programme to dissolve and
wash away the scattered salt in the
machine.
C
Since different salt brands
in the market have different
particle sizes and since the
water hardness may vary,
dissolution of the salt in water
may take a couple of hours.
Therefore, Salt Indicator
remains on for a while after
adding salt into the machine.
Loose salt grains can cause rust
marks in your machine if not
rinsed away. Only fill salt just
before a programme is run.

/ 17/43 EN
Preparation
3. Close the detergent dispenser lid by
pressing on it lightly. A “click” will be
heard when the lid is closed.
C
In programmes with prewash
and high temperature, in which
you use tablet detergents,
make sure that the detergent
dispenser lid is closed firmly.
C
Use powder detergent in short
programmes without prewash
since the solubility of the tablet
detergent changes depending
on the temperature and time.
A
Excessive usage of powder
detergents will cause the
detergent not dissolve
completely and will also cause
scratches on the glassware.
Combined tablet detergents
Combined tablet detergents exhibit water
softening and / or rinse aid effect in
addition to detergent effect. Some types
of these detergents also contain special-
purpose washing chemicals such as glass
and stainless steel protectors.
Combined tablet detergents are available
as 3in1, 5in1, Allin1 etc. They function
only up to a specific degree of water
hardness. Above this limit regeneration
salt and rinse aid must be added. Refer to
the instructions on the packaging of the
1. Push the latch to right to open the
detergent dispenser lid (A).
2. Put suggested amount of powder,
liquid/gel or tablet detergent in the
dispenser.
C
Inside the detergent dispenser,
there are level markings that
help you use appropriate
amount of detergent. When
brimful, detergent dispenser
will contain 40 cm³ of
detergent. Fill detergent up to
15 cm³ or 25 cm³ level marks
in the detergent dispenser
according to fullness of the
machine and/or soiling degree
of the dishes (1).
C
If dishes have been waiting
for a long time and have
dried residues, fill the 5 cm³
compartment too (2).

18 //43 EN
Preparation
combined detergent whether it is suitable
for the hardness level of the water supply.
C
While using combined tablet
detergents contact with
the detergent producers if
the dishes are wet and/or if
you notice limescale spots
particularly on glasses after the
washing programme is over.
C
The best washing performance
in dishwashers is obtained
by using detergent, rinse
aid and water softening salt
individually.
When you switch to powder, liquid/gel or
tablet detergent from a combined tablet
detergent:
1. Make sure that salt and rinse aid
reservoirs are full.
2. Set the water hardness to the highest
level and perform an empty run.
3. After the empty washing cycle, review
the user manual and readjust the
water hardness level so as to suit the
water supply.
4. Make the appropriate rinse aid
settings.
C
Depending on the model,
salt indicator and/or rinse aid
indicator must be enabled again
if they were disabled before.
Rinse aid
C
The rinse aid used in
dishwashers is a special
combination used to increase
drying efficiency and prevent
water or limescale stains on the
washed items. For this reason,
care must be paid to have rinse
aid in the rinse aid reservoir
and to use rinse aids produced
specially for dishwashers only.
1. Open the lid of the rinse aid reservoir
by pressing its latch (B).
2. Fill the reservoir until “MAX” level.
3. Turn the rinse aid amount adjuster
manually to a position between 1 and
6 (4). If there are stains on tableware
items after washing, level must be
increased and if there is a blue trace
after wiping them by hand, it must be
decreased. This is set to position 4 as

/ 19/43 EN
Preparation
factory default.
4. Close the lid of the reservoir by
pressing on it lightly.
C
Wipe clean any spilled rinse aid
outside the reservoir. Rinse
aid that spilled accidentally
will cause foaming and it will
eventually decrease washing
performance.
Items not sutable for washng n
the dshwasher
•Never wash dishes soiled by cigarette
ash, candle remnants, polish, dyestuff,
chemicals, etc. in your dishwasher.
•Do not wash iron alloy items in the
dishwasher. It can get corroded or
leave stains on other items.
•Do not wash cutlery with wooden or
bone stems, glued pieces, or pieces
that are not resistant to heat, as well
as copper and tin-plated containers in
the dishwasher.
C
Decorative prints of chinaware
as well as aluminum and silver
items may get discoloured
or tarnished after washing
in the dishwasher just as it
happens in handwashing as
well. Some delicate glass types
and crystals may become dull in
time. We strongly recommend
you to check if the tableware
you are going to purchase is
suitable for washing especially
in the dishwasher.
Placng the dshes nto the
dshwasher
You can use your dishwasher in the
optimum way with respect to energy
consumption and washing and drying
performance only if you place the dishes in
an orderly way.
•Wipe away any coarse food
remnants (bones, seeds, etc.) on the
dishes before placing them in the
dishwasher.
•Place thin, narrow pieces in the middle
sections of baskets if possible.
•There are two separate baskets in
which you can place your dishes in the
dishwasher. Place the heavily soiled
and bigger items in the lower basket
and smaller, delicate and light items in
the upper basket.
•Place the hollowed dishes such as
bowls, glasses and pans upside down
in the dishwasher. Thus, accumulation
of water in deep hollows is prevented.
A
To prevent possible injuries,
always place the sharp and
pointed dishes such as service
fork, bread knife, etc. upside
down so as their pointed ends
will face down or they will lie
horizontally in the dish basket.
Unload dishes in the lower basket first and
then the dishes in the upper basket.