CYP CWF-901SP User manual

CWF-901SP
Smart Player
Operation Manual
CWF-901SP

Safety Precautions
Please read all instructions before attempting to unpack or install or
operate this equipment, and before connecting the power supply.
Please keep the following in mind as you unpack and install this
equipment:
 Always follow basic safety precautions to reduce the risk of
re, electrical shock and injury to persons.
 To prevent re or shock hazard, do not expose the unit to rain,
moisture or install this product near water.
 Never spill liquid of any kind on or into this product.
 Never push an object of any kind into this product through
module openings or empty slots, as you may damage parts.
 Do not attach the power supply cabling to building surfaces.
 Do not allow anything to rest on the power cabling or allow it to
be abused by persons walking on it.
 To protect the equipment from overheating, do not block the
slots and openings in the module housing that provide ventilation.
Revision History
Version No Date Summary of Change
VR0 20111230 Preliminary Release

Table of Contents
1. Introduction..................................................................................1
2. Applications.................................................................................1
3. Package Contents ...................................................................... 1
4. System Requirements..................................................................1
5. Features........................................................................................2
6. Specification................................................................................2
7. Operation Controls and Functions............................................. 3
7.1 Upper Panel..................................................................... 3
7.2 Lower Panel..................................................................... 3
7.3 Left Panel ......................................................................... 4
7.4 Top Panel ......................................................................... 4
8. Software installation and un-installation from computer ........ 5
8.1 Computer Software Installation ..................................... 5
8.2 Uninstall the Computer Software ................................... 8
9. Configuring your application to use Wi-Fi Receiver.................8
9.1 Computer Easy Connection........................................... 9
9.2 Smart Phone Easy Connection ...................................... 9
9.3 Access Point Application.............................................. 10
10. 10. Connection and Installation............................................... 11
11. Acronyms................................................................................... 11

1
1. Introduction
The Smart Player can send video/audio signals from a smart phone, PC or
Notebook to a TV and use it as the primary display. The Smart Player is designed
as a DLNA DMR (Digital Media Renderer) which means users can easily send
audio, video and pictures from a computer to TV. Two USB ports allow users to
connect a mouse and keyboard to the device as well USB sticks for rmware
upgrades, This device can also act as a Access Point so users can access a
wired internet connection with their laptops or smart phones. Displaying audio,
video and pictures through network streaming the Smart Player is a simple yet
incredibly useful device for sharing content through networked streaming.
2. Applications
• PC/NB to TV
• Smart phone to TV
• Wi-Fi AP
3. Package Contents
• Smart Player
• 5V/2.6A DC Power Adaptor
• CD Driver
• Operation Manual
4. System Requirements
In order to run the application smoothly, please refer to the following hardware
recommendation.
Desktop/Workstation PC:
• CPU: Intel Core 2 Duo 2.0G or better
• Chipset: Intel 965 series chipset or better
• Memory: DDR2-800, 2GB or better
• Graphic Card: NVIDIA GeForce 8400GS / ATI Radeon X300 or better
• Network: 802.11 g/n Wi-Fi and/or 100/1000 Mbps Ethernet
Notebook/Laptop PC:
• CPU: Intel Core 2 Duo 2.0G or better
• Chipset: Intel 965 series chipset or better
• Memory: DDR2-800, 2GB or better
• Graphic: Chipset integrated (Intel X3100 Graphic) or better or NVIDIA
GeForce Go 8200M / ATI Radeon Mobility X300 standalone graphic chip
or better
• Network: 802.11 g/n Wi-Fi and/or 100/1000 Mbps Ethernet Supported OS:
• Windows 7, x86 and x64
• Windows Vista (Service Pack 1 or later), x 86 and x 64
Windows XP (Service Pack 3 or later)

2
5. Features
• Support PC to TV and Smart Phone to TV
• Can be a Wi-Fi AP
• Smart Player is a device that designed as a DLNA DMR
(Digital MediaRenderer) device.
• Display various picture, audio, and video contents through network streaming.
• USB port for Mouse / Keyboard.
• USB ash disk for rmware upgrade.
6. Specications
Host Interface 1 x 802.11n Wi-Fi and 100/1000Mbps Ethernet
Output port 1 x HDMI
Extender Port 3 x USB (Keyboard and Mouse only)
Video Supports (DLNA DMR) WMV, AVI, MPEG-1/2/4, 3GP & MOV with
2CH with bit-rate under 15Mbps
Audio Supports (DLNA DMR) LPCM, MPEG-1, WMA, WAV, MPEG-4, AAC,
OGG, 3GP, MP3 & MOV with 2CH
Resolution Supports Up to 1920 x 1080 (DLNA DMR)
Up to 1280 x 720 (PC to TV)
Up to 1920 x 1080 (Sandy Bridge)
ESD Protection Human body modell : ±8kV (air-gap discharge)
: ± 4kV (contact discharge)
Power Supply 5V/2.6A DC (US/EU standards, CE/FCC/UL certied)
Dimensions (mm) 100 (W) x 70 (D) x 20 (H)
Weight(g) 100
Chassis Material Plastic
Silkscreen Color White
ESD Protection Human Body Mode: ± 8kV (air-gap discharge)
: ± 4kV (contact discharge)
Operating Temperature 0°C ~ 40°C/32°F ~104°F
Storage Temperature -20°C ~ 60°C/-4°F ~140°F
Relative Humidity 20~90%RH (non-condensing)
Power Consumption 5.5W

3
7. Operation Controls and Functions
7.1 Upper Panel
1 2 3
HDMI Out Ethernet5V DC
①DC 5V: Plug the 5V DC power supply into the unit and connect the
adaptor to AC wall outlet.
②HDMI out: Connect the output port to the HDMI TV/display.
③Ethernet IN: This slot is to connect with CAT5e/6 cable from your network
system or PC/Laptop for a wire connection of input signal sending.
7.2 Lower Panel
1
USB Port
2
1
①USB Port 1 & 2: These slots are to connect with Wi-Fi module and USB
devices such as Keyboard and Mousel.

4
7.3 Left Panel
USB Port
3
1
①USB Port 3: This slot is to connect with Wi-Fi module and USB devices such
as keyboard and mouse for control.
7.4 Top Panel
①Power LED: This blue LED will illuminate when the device is connected
with power supply.
1

5
8. Software installation and un-installation
The following sections describe the procedures for installing the PC2TV
device’s drivers. Insert the provid CD driver into the input source’s CD-
ROM driver then begin the installation.
8.1 Software Installation
 Insert the CD driver included in the package and double click on the
PC2TV execute le ” ” to start the setup process.
 Browse the folder where the les should be unpacked and click “Con
tinue” to start Installation.
 InstallShield Wizard will install PC2TV on your input source device and
click “Next” to continue.

6
 Add program icons to the program folder. You may type a new
folder name or select one from the existing folders list and click
“Next” to continue.
 Press “Analysis” to evaluate your computer system.

7
 The Benchmark Information will show whether or not your computer
system is matching with the product requirement.
 After the setup is complete click on Finish and restart your source
device.

8
8.2 Uninstall the Computer Software
Follow the steps below to uninstall the PC2TV Software
Step 1: Open the Control Panel: Start a Control Panel a Uninstall a
program.
Step 2: Select PC2TV execute le and click to remove.
Step 3: Click on Finish to complete the un-install process.
9. Conguring your application to use the Receiver
Congure your PC or Smart Phone with Ethernet connection, or becoming
the internet access point. Keep in mind, however, that the number,
thickness and location of walls, ceilings or other objects that the wireless
signals must pass through, may limit the range. Typical ranges vary
depending on the types of materials and background RF(radio frequency)
noise in your usage area.

9
9.1 Computer Easy Connection
Step 1: Go to Start > Settings > Control Panel. Double-click the System
and Network and Internet Options Icon. From the Options Icon, click
the button to connect to the Internet and select Wireless Option
to use a wireless network and then choose “CWF-901SP AccessPoint”
to connect to the Internet.
Step 2: Click the PC2TV icon “ ” on the windows desktop, to run
the utility.
Step 3: Click “Play” to establish computer contents to display.
Step 4: Click “Stop” to disconnect the connection.
9.2 Smart Phone Easy Connection
To begin with the Smart Phone connection, the user need to make
sure if the Smart Phone support DLNA (Digital Living Network Alliance)
function. If the Smart Phone is not supporting DLNA, users can download
the DLNA software like "SKIFTA" or "Twonky media" from Android market
or APP store.
Congure your Internet settings form the Smart Phone devices:
• From the Home screen, sweep your nger downward to
display the Notication Panel.
• Touch Wi-Fi to turn Wi-Fi ON.
• When your phone completes a scan, touch a Wi-Fi network to

10
connect “CWF-901SP”.
• Select the PC2TV(DMR) for display system
 For non-DLNA Smart Phone, users may download and execute
softwares like “Twonky” and “Skifta”.
 For Samsung DLNA Smart Phone, please execute “AllShare” software.
 For HTC DLNA Smart Phone, Please execute “Connected Media”.
Note: The Smart Phone's DLNA installation may be vary with different
brand and therefore, the instruction above are for reference only. For
other DLNA Smart Phone not lists in this user manual, please refer to
DLNA Smart Phone user manual or contact your Smart Phone
customer help line to start with.
9.3 Access Point Application
Before you begin, connect an active Ethernet cable to the Ethernet
port of the device. Then you can connect multiple computers or Wi-Fi
devices through the CWF-901SF. If your Wi-Fi devices running speed are
become slowly, please disconnect some of the links and Wi-Fi devices to
release more bandwidth.
Congure your Internet settings from the Computer devices:
• Go to Start > Settings > Control Panel. Double-click the System
and Network and Internet Options Icon. From the Options
Icon, click the button to connect to the Internet and
select Wireless Option to use a wireless network and then choose
“CWF-901SP” to connect to the Internet.

11
Acronyms A
Acronym Complete Term
DLNA Digital Living Network Alliance
10. Connection and Installation
HDMI
HDMI
HDMI
CAT5e/6 or WiFi
WiFi
or