CYP CP-MHD421 User manual

DRAFT
CP-MHD421
4 by 1 High Denition QUAD Video Processor
Operation Manual
Operation Manual

DRAFT
DISCLAIMERS
The information in this manual has been carefully checked and
is believed to be accurate. Cypress Technology assumes no
responsibility for any infringements of patents or other rights of third
parties which may result from its use.
Cypress Technology assumes no responsibility for any inaccuracies
that may be contained in this document. Cypress also makes no
commitment to update or to keep current the information contained
in this document.
Cypress Technology reserves the right to make improvements to this
document and/or product at any time and without notice.
COPYRIGHT NOTICE
No part of this document may be reproduced, transmitted,
transcribed, stored in a retrieval system, or any of its part translated
into any language or computer le, in any form or by any means—
electronic, mechanical, magnetic, optical, chemical, manual, or
otherwise—without express written permission and consent from
Cypress Technology.
© Copyright 2012 by Cypress Technology.
All Rights Reserved.
Version VR1.0 May 2012
TRADEMARK ACKNOWLEDGMENTS
All products or service names mentioned in this document may be
trademarks of the companies with which they are associated.

DRAFT
SAFETY PRECAUTIONS
Please read all instructions before attempting to unpack, install or
operate this equipment and before connecting the power supply.
Please keep the following in mind as you unpack and install this
equipment:
• Always follow basic safety precautions to reduce the risk of re,
electrical shock and injury to persons.
• To prevent re or shock hazard, do not expose the unit to rain,
moisture or install this product near water.
• Never spill liquid of any kind on or into this product.
• Never push an object of any kind into this product through any
openings or empty slots in the unit, as you may damage parts
inside the unit.
• Do not attach the power supply cabling to building surfaces.
• Use only the supplied power supply unit (PSU). Do not use the PSU
if it is damaged.
• Do not allow anything to rest on the power cabling or allow any
weight to be placed upon it or any person walk on it.
• To protect the unit from overheating, do not block any vents or
openings in the unit housing that provide ventilation and allow for
sufcient space for air to circulate around the unit.
REVISION HISTORY
VERSION NO. DATE DD/MM/YY SUMMARY OF CHANGE
RDV1 08/11/11 Preliminary Release

DRAFT
CONTENTS
1. Introduction............................................ 5
2. Applications........................................... 5
3. Package Contents ................................ 5
4. System Requirements............................ 5
5. Operation Controls and Functions....... 1
5.1 Front Panel ........................................1
5.2 Rear Panel.........................................2
6. On-Screen-Icon..................................... 3
7. Connection and Installation................. 4
8. Specications ........................................ 5
9. Acronyms ............................................... 6

DRAFT
1
1. INTRODUCTION
This High Denition QUAD Video Processor that can accepted four
HDMI High Denition video sources input and compress it into one
QUAD video output. It is ideal for HD security cameras and integrated
into one QUAD high quality video for HDMI monitor.
2. APPLICATIONS
• Four HD high-end security cameras input and one QUAD HDMI
video output, for security market, hospital operating room or
meeting room.
3. PACKAGE CONTENTS
• High Denition QUAD Video Processor
• Operation Manual
4. SYSTEM REQUIREMENTS
• Support Four HDMI sources input and one QUAD HDMI video output.
• Video input/output supports resolution up to 1080p@60Hz.

DRAFT
2
5. OPERATION CONTROLS AND FUNCTIONS
5.1 Front Panel
1POWER LED
This green LED will illuminate once the device power on.
2HDD LED
This red LED will blink when the device is reading/writing data from
the hard disk drive.
3RESET BUTTON
Press this button when the system require to be reset.
4POWER BUTTON
Press this button to power on/off the device or press and hold for 4
second to enforce the shut down action.

DRAFT
3
5.2 Rear Panel
1PS2 Mouse Jack
Connect with mouse device with PS2 cable.
2PS2 Keyboard Jack
Connect with keyboard device with PS2 cable.
3VGA D-Sub 15pin Jack
4HDMI Output Jack
54 x HDMI Input Jacks
6Power Switch
7AC Jack

DRAFT
4
6. ON-SCREEN-ICON
1
2
3
1A~D
Click the desire input channel for a single screen display.
2X
Click this button for a full screen display or display with UI function
aside.
3+
Click for a 2 x 2 display.

DRAFT
5
7. CONNECTION AND INSTALLATION

DRAFT
6
8. SPECIFICATIONS
Input ports 4 x HDMI
Output port 1 x HDMI
Dimensions 483 (W) x 89 (D) x 380 (H)
Weight 8000
Chassis Material Metal
Silkscreen Color Black
ESD Protection Human Body Model:
± 8kV (Air-gap discharge)
± 4kV (contact discharge)
Operating Temperature 0˚C ~ 40˚C / 32 ˚F ~ 104 ˚F
Storage Temperature -20˚C ~ 60˚C / -4 ˚F ~ 140 ˚F
Relative Humidity 20~90%RH (non-condensing)
Power Consumption 65W