Cypress Semiconductor PSoC CY8CKIT-025 User manual

PSOC®PRECISION ANALOG TEMPERATURE SENSOR EXPANSION BOARD KIT
QUICK START GUIDE
CY8CKIT-025 PSoC Precision Analog Temperature Sensor Expansion Board Kit Contents
Install Software
1. Insert the kit DVD and install the kit software.
2. View the user guide for detailed instructions.
3. The projects will be installed at "C:\Program
Files\Cypress\PSoC Precision Analog
EBK\2.0\
Board Setup
1. Connect jumper wires on J8 and J9; insert
jumper J6 for RTD measurement.
2. Insert jumper J5 between pins 2 and 3.
2X20 Pin
Connector for
Development Kit
Interface
r
RTD Section
r
Thermistor Section
r
Diode
Section
r
Thermocouple Section
CY8CKIT-025 Board
CY8CKIT-012
Prototype
Boards
Kit DVD
Omega
Thermocouple K-type
Wires
2N3904 NPN
Transistors Prototype Headers for
CY8CKIT-012 Board
Quick Start
Guide
1
2

© 2011-2012 Cypress Semiconductor Corporation. All rights reserved. All trademarks or registered
trademarks referenced herein are the properties of their respective owners. Doc #: 001-65531 Rev. *C
http://www.cypress.com/go/CY8CKIT-025
For the latest information about this kit, visit
PSOC®PRECISION ANALOG TEMPERATURE SENSOR EXPANSION BOARD KIT
QUICK START GUIDE
Board Setup
1. Connect the thermocouple at connector J2.
2. Connect jumper wires on pins 3, 4 and pins 7, 8
of J4 for diode measurement.
3. Connect 2N3904 transistors at connector J4 for
diode measurement.
Connect with PSoC 3/PSoC 5 Development Kit
1. Connect the CY8CKIT-025 Expansion Board Kit to
Port E of the CY8CKIT-030 PSoC 3 Development
Kit/ CY8CKIT-050 PSOC 5 Development Kit.
2. Power the CY8CKIT-030/ CY8CKIT-050 by
connecting the USB cable at J1.
Program the PSoC Device
1. Open TempSense_030_050.cywrk from PSoC
Creator Start Page > Examples and Kits > Kits >
PSoC Precision Analog EBK 2.1.
Use TempSense_001 for CY8CKIT-001.
2. Click the Program icon in PSoC Creator.
3. Press Reset button on board to restart the kit.
Test the Expansion Board Kit
1. LCD shows the temperature reading.
2. Use the P5_5 and P5_6 CapSense buttons on
CY8CKIT-030/ CY8CKIT-050 to select
temperature display of different sensors. Note:
For CY8CKIT-001, use the P0_5 and P0_6
CapSense buttons.
3
4
5
6