FEATURES:
⚫OONO F-1063 Manual and automatic transfer switch, an easy to mount 15 Amp inline transfer module
provides switching between AC IN1 (Inverter or Generator) and AC IN2 (Utility or Shore Power) AC
source. With input and output and switch status indicators. It has a manual power switch function,
which can quickly control the on and off of the output. With the function of automatic and manual
working mode, the product can work in automatic mode, and the input source can also be selected
manually.
⚫Automatic mode (MODEswitch set toAUTO): whenAC IN2 (Utilityor Shore Power) is powered, the load
power will be switched to AC IN2, when AC IN2 is powered off, the load power will be switched to AC IN1
(Inverteror Generator). Manual mode (MODE switch set to SW1 or SW2): You can manually select AC IN1
(Inverter or Generator) orAC IN2 (Utility or Shore Power) as the input source according to your needs.
⚫Operating voltageAC 90 to 135V 50/60Hz. Maximumcurrent 15 Amp. Transfer time less than 30mS (0.03
second), for most smart devices or computers, the switching action of 30mS time will not affect their
normal operation.
⚫Internal four high power SPST relays switch design, effectively avoid the problem of DPDT relay high
inductive load arcing. Live and Neutral wire are switched at the same time. The Ground wires of the two
inputs and output are connected together internally and will not follow the switch on and off.
⚫IP66 waterproof level design, suitable for indoor or outdoor use. AC IN1, AC IN2 and AC OUT cables:
Length 19 inches (0.5 meter), 14AWG (2.08 square millimeter) x 3 cores.
SPECIFICATIONS:
⚫Input or Output Voltage: …………………………AC 90 - 135V 50/60Hz.
⚫Maximum Current: ……………………………….. 15 Amp.
⚫Transfer Time: …………………………………..... 30 millisecond.
⚫Input / Output Cable Length: …………………… 19 inches (0.5 meter).
⚫Enclosure Waterproof Rating: …………………. IP66.
INPUT / OUTPUT SWITCH STATUS:
