d & b audiotechnik R70 User manual

Ethernet to CAN interface
R70 web interface / Recommended browsers
Windows: Microsoft Internet Explorer 6.0 or higher,
Mozilla Firefox 2.0 or higher.
Mac OS: Safari 1 or higher.
Physical setup / IP address
Note: When Power over Ethernet (PoE) is available, the
external power supply is not required.
When the R70 is connected to a network with a DHCP server
present, a matching IP address is assigned to the interface
automatically.
In all other cases, the R70 must be adapted manually.
The R70 IP address is set to 192.168.1.70 by factory default
(see also the label sticker on the rear panel of the R70).
R70
Quick guide (1.1 EN)
14.11.2012 R70 Ethernet to CAN interface
1

Ethernet to CAN interface
Direct connection
To access the R70, manually assign an IP address to the PC on your
network to the same subnet as the R70.
Proceed as follows:
1. From "Start-Settings" select the "Network Connection"
associated with your network adapter.
2. Select "Internet Protocol (TCP/IP)" and click "Properties".
3. Enter a static IP address in the same subnet as the R70 by
selecting "Use the following IP address":
IP address: 192.168.1.71
Subnet mask: 255.255.255.0
4. Apply the changes by clicking "OK" and close the network
properties dialog.
To display the web interface of the R70 enter the IP address of the
R70 in the address bar of your web browser.
LAN network with DHCP server
The "Obtain an IP address automatically" function is enabled by
default.
Note: If a firewall is active, allow access to the UDP Port
33333 (fix) and the TCP Port 30000 (adjustable).
1. Connect the R70 to your network and an IP address is assigned
by the DHCP server.
2. Start the respective d&b software (e.g. R1 - Edit mode) and
select "CAN" from the "Extras-Options" menu.
ÞThe program scans for connected interfaces and all devices
found are listed. This may take several seconds.
3. Right click on an R70 entry in the list and select "Configure
Interface" to access the R70 web interface.
R70
Quick guide (1.1 EN)
www.dbaudio.com
DOC01816, 09/2012 © d&b audiotechnik GmbH
2