D-Link DWA-192 User manual

Version 1.0 | 05/26/2015
DWA-192
User Manual
AC1900 Wi-Fi USB 3.0 Adapter

2D-Link DWA-192 User Manual
Table of Contents
Product Overview..............................................................3
Package Contents.........................................................................3
System Requirements.................................................................3
Introduction ...................................................................................4
Features............................................................................................ 5
Hardware Overview.....................................................................6
Installation......................................................................... 7
Getting Started.............................................................................. 7
Remove Existing Installations ..........................................7
Disable Other Wireless Adapters.....................................8
Driver Installation.......................................................................10
Wireless Installation Considerations....................................13
Connecting to a Wireless Network .................................14
Using Windows 8 ........................................................................14
Using Windows 7 .......................................................................16
Conguring Wireless Security........................................18
Troubleshooting..............................................................21
Wireless Basics.................................................................25
Wireless Modes............................................................................29
Networking Basics...........................................................30
Check your IP address...............................................................30
Statically Assign an IP address...............................................31
Technical Specications..................................................32
Regulatory Information ..................................................33
Table of Contents

3D-Link DWA-192 User Manual
Section 1 - Product Overview
• D-Link DWA-192 AC1900 Wi-Fi USB 3.0 Adapter
• Micro-USB 3.0 Cable
• Manual and Warranty on CD
• Quick Installation Guide
System Requirements
• A computer or laptop with an available USB port (USB 3.0 recommended)
• Windows®8.1 / 8/ 7
• CD-ROM drive
• 1.3 GHz processor and at least 128 MB of RAM
• A 802.11ac/n/b/g/a access point or wireless router
Product Overview
Package Contents

4D-Link DWA-192 User Manual
Section 1 - Product Overview
Introduction
The DWA-192 AC1900Wi-Fi USB 3.0 Adapter is a convenient wireless connectivity solution for desktop or notebook PCs. Instead
of stringing Ethernet cables to your PC or dismantling your desktop computer case, the DWA-192 can enable 802.11ac wireless
connectivity by simply utilizing your desktop or notebook PC’s USB port.
Powered by Wireless AC technology, the DWA-192 provides a much faster wireless connection and superior reception than
802.11n*.The DWA-192 is designed for use in bigger homes and for those that demand higher bandwidth networking. Maximize
wireless performance by connecting this USB adapter to a Wireless AC router and stay connected from virtually anywhere
in the home. This USB adapter supports WPA and WPA2 encryption to prevent outside intrusion and protect your personal
information from being exposed.
Compact in size, robust in speed the DWA-192 AC1900 Wi-Fi USB 3.0 Adapter is a convenient solution for providing high
performance wireless connectivity to your desktop or notebook PC. Enjoy the many benets ofWireless AC connectivity today!
* Maximum wireless signal rate derived from IEEE Standard 802.11ac and 802.11n specications. Actual data throughput will vary. Network conditions and environmental
factors, including volume of network trac, building materials and construction, and network overhead, lower actual data throughput rate. Environmental conditions
will adversely aect wireless signal range.

5D-Link DWA-192 User Manual
Section 1 - Product Overview
Features
• Compact size for placement anywhere
• Convenience of Plug & Play installation
• Fully 802.11n/g/b/a compatible
• 802.11ac compliant
• Advanced AC SmartBeam technology for enhanced speed and range
• Powered by the USB port; no external power source required
• USB 3.0 standard*
•You can securely connect to a wireless network usingWPA/WPA2 (Wi-Fi Protected Access) providing you a much
higher level of security for your data and communication than has previously been available.
• Position the DWA-192 almost anywhere in your workspace to achieve the best reception possible
• User-friendly setup wizard
* Using a USB 2.0 or USB 1.1 port will adversely aect throughput.

6D-Link DWA-192 User Manual
Section 1 - Product Overview
Hardware Overview
1Status LED Blinking blue: The device is connected to the computer. Solid blue: The device is connected to
the network.
2LED On/O Button Turns the Status LED on or o.
3Micro USB 3.0 Connector Used to connect the DWA-192 to your computer via the included cable.
4WPS Button Press the WPS button to automatically connect to a WPS-enabled wireless router or access point
and establish connectivity.
32 4
1

7D-Link DWA-192 User Manual
Section 2 - Installation
Getting Started
Installation
This section will walk you through the installation process. If you have a built-in wireless adapter, please disable it in device
manager before installing your D-Link adapter. Also, if you have previously installed another wireless adapter, please make
sure any software is uninstalled.
Before installing your new D-Link wireless adapter, please verify the following:
• Remove any previous installations of wireless adapters
• Disable any built-in wireless adapters
• Verify the settings such as the SSID and security settings of the network you want to connect to
Remove Existing Installations
If you’ve installed a dierent manufacturer’s adapter or a dierent model D-Link adapter, make sure the software is uninstalled
before installing the new software. Some utilities may cause a conict with the new software. If you plan to use multiple adapters
at dierent times, make sure the utilities are not set to load when your computer boots up.
To remove any old software:
Windows®7/8 users: Click Start > Control Panel > Programs and Features.

8D-Link DWA-192 User Manual
Section 2 - Installation
Disable Other Wireless Adapters
Most newer laptops may include a built-in wireless adapter.To prevent any
conicts with the D-Link wireless adapter, it is recommended to disable
the wireless adapter (as well as any unused Ethernet adapters).
From the desktop, right-click on the My Computer icon and select
Properties.
Click the Hardware tab and then click Device Manager. Scroll down the
list and click the +sign to the left of Network Adapters.
Right-click the adapter you would like to disable and select Disable.

9D-Link DWA-192 User Manual
Section 2 - Installation
Click Yes to disable the adapter.
The adapter is now disabled. When disabled, a red X will be displayed.
Disabling the adapter will not remove the drivers. If you would like to use
the adapter, simply right-click it and select Enable.

10D-Link DWA-192 User Manual
Section 2 - Installation
Driver Installation
Before using the DWA-192 AC1900 Wi-Fi USB 3.0 Adapter, you must rst
install a device driver from the included D-Link CD.
Warning: Do NOT connect the DWA-192 AC1900 Wi-Fi USB 3.0 Adapter to your
computer’s USB port before installing the driver software from the D-Link CD.
Turn on the computer and insert the D-Link DWA-192 Driver CD in the
CD-ROM drive.
Note: If the CD Autorun function does not automatically start on your
computer, go to Start >Run. In the run box type “D:\autorun.exe” (where
D: represents the drive letter of your CD-ROM drive).
The D-Link DWA-192 InstallShield Wizard window will appear. Select the
setup language from the list and click Next.