D-Link DGL-4500 - GamerLounge Xtreme N Gaming Router... User manual

D-Link reserves the right to revise this publication and to make changes in the content hereof without obligation to notify
any person or organization of such revisions or changes.
Manual Revisions
Trademarks
D-Link and the D-Link logo are trademarks or registered trademarks of D-Link Corporation or its subsidiaries in the United
States or other countries. All other company or product names mentioned herein are trademarks or registered trademarks
of their respective companies.
Copyright © 2008-2009 by D-Link Systems, Inc.
All rights reserved. This publication may not be reproduced, in whole or in part, without prior expressed written permission
from D-Link Systems, Inc.
Revision Date Description
1.0 August 22, 2007 DGL-4500 Revision A1 with firmware version 1.00
1.1 December 10, 2007 Removed WDS support (firmware 1.02)
1.2 January 17, 2008 Updated OLED screens
Removed Big Pond support
1.3 June 18, 2008 Updated the Technical Specifications section
1.4 August 25, 2008 Updated with firmware 1.12
1.5 July 9, 2009 Advanced DNS and CAPTCHA
Preface

iiiD-Link DGL-4500 User Manual
Table of Contents
Preface..........................................................................ii
Manual Revisions .................................................... ii
Trademarks .............................................................. ii
Product Overview ........................................................1
Package Contents....................................................1
System Requirements .............................................2
Introduction..............................................................3
Features................................................................... 4
Hardware Overview .................................................5
Connections.......................................................5
LEDs ..................................................................6
OLED Screen..................................................... 7
Installation....................................................................8
Before you Begin .....................................................8
Wireless Installation Considerations........................9
Network Diagram ...................................................10
Manual Setup................................................... 11
Connect to Cable/DSL/Satellite Modem....... 11
Connect to Another Router ..........................12
Getting Started ...................................................... 14
Quick Router Setup Wizard..............................14
Configuration.............................................................15
Web-based Configuration Utility ............................ 15
Setup Wizard ................................................... 16
Manual Configuration....................................... 20
Dynamic (Cable)...........................................20
PPPoE (DSL) ...............................................22
PPTP............................................................23
L2TP.............................................................25
Static (assigned by ISP)...............................27
Wireless Settings .............................................28
SSID (Wireless Network Name)...................28
Wireless Band ..............................................28
Change Channel ..........................................29
Transmission Rate........................................ 29
Network Settings.............................................. 30
DHCP Server Settings .................................31
DHCP Reservation.......................................32
Virtual Server...................................................33
Application Rules .............................................35
Gaming ............................................................36
GameFuel ........................................................37
Classification ................................................37
Change Uplink Speed ..................................37
Routing ............................................................39
Access Control................................................. 40
Access Control Wizard .................................40
Website Filters ................................................. 43
MAC Address Filters ........................................44
Firewall Settings............................................... 45
Enable SPI ................................................... 45
DMZ .............................................................45
Table of Contents

ivD-Link DGL-4500 User Manual
Table of Contents
Inbound Filters .................................................46
Advanced Wireless Settings ............................ 47
Transmit Power.............................................47
DTIM Interval................................................47
802.11d ........................................................47
WMM............................................................47
Enable .........................................................47
WISH Settings ................................................. 48
Wi-Fi Protected Setup (WPS) .......................... 50
Advanced Network Settings............................. 52
UPnP Settings..............................................52
WAN Port Speed .......................................... 52
Multicast Streams.........................................52
Administrator Settings...................................... 53
Change Password ........................................ 53
Enable HTTPS Server..................................53
Remote Management...................................53
Time Settings................................................... 54
SysLog............................................................. 55
Email Settings.................................................. 56
System Settings............................................... 57
Load/Save Configuration Settings................57
Restore Factory Settings..............................57
Reboot Device..............................................57
Update Firmware .............................................58
Dynamic DNS ..................................................59
System Check.................................................. 60
Schedules ........................................................61
Device Information ........................................... 62
Wireless ...........................................................63
Routing ............................................................63
Logs .................................................................64
Statistics ..........................................................65
Internet Sessions ............................................. 65
Wish Sessions .................................................66
Help .................................................................66
Wireless Security.......................................................67
What is WPA? ........................................................67
Wireless Security Setup Wizard ............................68
Add Wireless Device with WPS Wizard .................70
Configure WEP ......................................................71
Configure WPA-Personal (PSK)............................. 72
Configure WPA-Enterprise (RADIUS)....................73
Connect to a Wireless Network ................................75
Using Windows Vista®...............................................................................75
Configure Wireless Security .................................. 76
Connect Using WCN 2.0 in Windows Vista®......... 78
Connect to a Wireless Network ................................ 79
Using Windows®XP............................................... 79
Configure WEP ......................................................80

vD-Link DGL-4500 User Manual
Table of Contents
Configure WPA-PSK ..............................................82
Troubleshooting.........................................................84
Wireless Basics .........................................................88
What is Wireless? ..................................................89
Tips........................................................................ 91
Wireless Modes .....................................................92
Networking Basics .................................................... 93
Check your IP address ..........................................93
Statically Assign an IP address ............................. 94
Technical Specifications...........................................95
Contacting Technical Support.................................. 96
Warranty ..................................................................... 97
Registration..............................................................103

1D-Link DGL-4500 User Manual
Section 1 - Product Overview
Product Overview
Note: Using a power supply with a different voltage rating than the one included with the DGL-4500 will cause damage and void the warranty for this
product.
D-Link DGL-4500 Gaming Router
Power Adapter
Ethernet Cable
CD-ROM
Stand
Package Contents

2D-Link DGL-4500 User Manual
Section 1 - Product Overview
Network Requirements
• An Ethernet-based Cable or DSL modem
• IEEE 802.11n-draft/g/a wireless clients
• 10/100/1000 Ethernet
Web-based Configuration
Utility Requirements
Computer with the following:
• Windows®, Macintosh, or Linux-based operating
system
• An installed Ethernet adapter
Browser Requirements:
• Internet Explorer 6.0 or higher
• Mozilla 1.7.12 or higher
• Firefox 1.5 or higher
• Safari 1.0 or higher (with Java 1.3.1 or higher)
• Flock 0.7.14 or higher
• Opera 6.0 or higher
Windows®Users: Make sure you have the latest version
of Java installed. Visit www.java.com to download the
latest version.
CD Installation Wizard
Requirements
Computer with the following:
• Windows®XP with Service Pack 2 or Vista®
• An installed Ethernet adapter
• CD-ROM drive
System Requirements

3D-Link DGL-4500 User Manual
Section 1 - Product Overview
Introduction
TOTAL PERFORMANCE
Combines award winning router features and IEEE 802.11a/Draft 802.11n wireless technology to provide the best
wireless performance
TOTAL SECURITY
The most complete set of security features including Active Firewall and WPA/WPA2 to protect your network against
outside intruders
TOTAL COVERAGE
Provides greater wireless signal rates even at farther distances for best-in-class Whole Home Coverage.
ULTIMATE PERFORMANCE
The D-Link Xtreme N™Gaming Router (DGL-4500) is a draft 802.11n/802.11a compliant device that delivers real world
performance of up to 14x faster than an 802.11g wireless connection (also faster than a 100Mbps wired Ethernet
connection). Create a secure wireless network to share photos, files, music, video, printers, and network storage
throughout your home. Connect the Xtreme N™Gaming Router to a cable or DSL modem and share your high-speed
Internet access with everyone on the network. In addition, this Router includes GameFuel engine that keeps online
gaming smooth and responsive, providing a better Internet experience.
EXTENDED WHOLE HOME COVERAGE
Powered by Xtreme N™technology, this high performance router provides superior Whole Home Coverage while
reducing dead spots. The Xtreme N™Gaming Router is designed for use in bigger homes and for users who demand
higher performance networking. Add a Xtreme N™notebook or desktop adapter and stay connected to your network
from virtually anywhere in your home.
TOTAL NETWORK SECURITY
The Xtreme N™Gaming Router supports all of the latest wireless security features to prevent unauthorized access,
be it from over the wireless network or from the Internet. Support for WPA and WPA2 standards ensure that you’ll be
able to use the best possible encryption method, regardless of your client devices. In addition, this Xtreme N™Gaming
Router utilizes dual active firewalls (SPI and NAT) to prevent potential attacks from across the Internet.
* Maximum wireless signal rate derived from IEEE Standard 802.11a, 802.11g and Draft 802.11n specifications.Actual data throughput will vary. Network conditions and
environmental factors, including volume of network traffic, building materials and construction, and network overhead, lower actual data throughput rate. Environmental
conditions will adversely affect wireless signal range.

4D-Link DGL-4500 User Manual
Section 1 - Product Overview
• Faster Wireless Networking - The DGL-4500 provides up to 300Mbps* wireless connection with other
802.11n wireless clients. This capability allows users to participate in real-time activities online, such as
video streaming, online gaming, and real-time audio. The performance of this 802.11n wireless router
gives you the freedom of wireless networking at speeds 14x faster than 802.11g.
• Compatible with 802.11a and 802.11g Devices - The DGL-4500 is still fully compatible with the IEEE
802.11a/g standard, so it can connect with existing 802.11a/g PCI, USB and Cardbus adapters.
• OLED Display - The OLED display screen provides information regarding the router.
• Advanced Firewall Features - The Web-based user interface displays a number of advanced network
management features including:
• Content Filtering - Easily applied content filtering based on MAC Address, URL, and/or
Domain Name.
• Filter Scheduling - These filters can be scheduled to be active on certain days or for a
duration of hours or minutes.
• Secure Multiple/Concurrent Sessions - The DGL-4500 can pass through VPN sessions. It
supports multiple and concurrent IPSec and PPTP sessions, so users behind the DGL-4500
can securely access corporate networks.
• User-friendly Setup Wizard - Through its easy-to-use Web-based user interface, the DGL-4500 lets you
control what information is accessible to those on the wireless network, whether from the Internet or from
your company’s server. Configure your router to your specific settings within minutes.
* Maximum wireless signal rate derived from IEEE Standard 802.11a, 802.11g, and Draft 802.11n specifications. Actual data throughput will vary. Network conditions and
environmental factors, including volume of network traffic, building materials and construction, and network overhead, lower actual data throughput rate. Environmental
conditions will adversely affect wireless signal range.
Features

5D-Link DGL-4500 User Manual
Section 1 - Product Overview
Hardware Overview
Connections
USB
Connect a USB 1.1 or 2.0 flash
drive to configure the wireless
settings using WCN.
Reset
Pressing the Reset button restores the router to
its original factory default settings.
Gigabit LAN Ports (1-4)
Connect Ethernet devices such as
computers, switches, and hubs.
Internet Port
The auto MDI/MDIX Internet port is
the connection for the Ethernet cable
to the cable or DSL modem.
Power Receptor
Receptor for the supplied power
adapter.

6D-Link DGL-4500 User Manual
Section 1 - Product Overview
Hardware Overview
LEDs
OLED Screen
Displays information
regarding the router
(see next page).
WPS LED (side of unit)
A solid light indicates a
successful WPS connection.
A blinking light indicates the
device is trying to establish a
connection.
Power LED
A solid light indicates a
proper connection to the
power supply.

7D-Link DGL-4500 User Manual
Section 1 - Product Overview
Hardware Overview
OLED Screen
OLED Screen
23 4 65
1
1 WAN Displays Internet connectivity.
2 Menu Select to display the OLED main menu.
3 Performance Select to display the data of the LAN, WAN,
and wireless connections.
4 WPS Displays the WPS status.
5 Date/Time Displays the routers date and time.
6 Status Displays the device status.

8D-Link DGL-4500 User Manual
Section 2 - Installation
Before you Begin
This section will walk you through the installation process. Placement of the router is very important. Do not place the
router in an enclosed area such as a closet, cabinet, or in the attic or garage.
• Please configure the router with the computer that was last connected directly to your modem.
• You can only use the Ethernet port on your modem. If you were using the USB connection before using
the router, then you must turn off your modem, disconnect the USB cable and connect an Ethernet cable
to the Internet port on the router, and then turn the modem back on. In some cases, you may need to call
your ISP to change connection types (USB to Ethernet).
• If you have DSL and are connecting via PPPoE, make sure you disable or uninstall any PPPoE software
such as WinPoet, Broadjump, or Enternet 300 from your computer or you will not be able to connect to
the Internet.
• When running the Setup Wizard from the D-Link CD, make sure the computer you are running the CD
from is connected to the Internet and online or the wizard will not work. If you have disconnected any
hardware, re-connect your computer back to the modem and make sure you are online.
Installation

9D-Link DGL-4500 User Manual
Section 2 - Installation
Wireless Installation Considerations
The D-Link wireless router lets you access your network using a wireless connection from virtually anywhere within
the operating range of your wireless network. Keep in mind, however, that the number, thickness and location of walls,
ceilings, or other objects that the wireless signals must pass through, may limit the range.Typical ranges vary depending
on the types of materials and background RF (radio frequency) noise in your home or business. The key to maximizing
wireless range is to follow these basic guidelines:
1. Keep the number of walls and ceilings between the D-Link router and other network devices to a minimum
- each wall or ceiling can reduce your adapter’s range from 3-90 feet (1-30 meters.) Position your devices
so that the number of walls or ceilings is minimized.
2. Be aware of the direct line between network devices. A wall that is 1.5 feet thick (.5 meters), at a
45-degree angle appears to be almost 3 feet (1 meter) thick. At a 2-degree angle it looks over 42 feet
(14 meters) thick! Position devices so that the signal will travel straight through a wall or ceiling (instead
of at an angle) for better reception.
3. Building Materials make a difference. A solid metal door or aluminum studs may have a negative effect on
range. Try to position access points, wireless routers, and computers so that the signal passes through
drywall or open doorways. Materials and objects such as glass, steel, metal, walls with insulation, water
(fish tanks), mirrors, file cabinets, brick, and concrete will degrade your wireless signal.
4. Keep your product away (at least 3-6 feet or 1-2 meters) from electrical devices or appliances that
generate RF noise.
5. If you are using 2.4GHz cordless phones or X-10 (wireless products such as ceiling fans, lights, and
home security systems), your wireless connection may degrade dramatically or drop completely. Make
sure your 2.4GHz phone base is as far away from your wireless devices as possible.The base transmits
a signal even if the phone in not in use.

10D-Link DGL-4500 User Manual
Section 2 - Installation
Network Diagram

11D-Link DGL-4500 User Manual
Section 2 - Installation
If you are connecting the router to a cable/DSL/satellite modem, please follow the steps below:
1. Place the router in an open and central location. Do not plug the power adapter into the router.
2. Turn the power off on your modem. If there is no on/off switch, then unplug the modem’s power adapter.
Shut down your computer.
3. Unplug the Ethernet cable (that connects your computer to your modem) from your computer and place
it into the Internet port on the router.
4. Plug an Ethernet cable into one of the four LAN ports on the router. Plug the other end into the Ethernet
port on your computer.
5. Turn on or plug in your modem. Wait for the modem to boot (about 30 seconds).
6. Plug the power adapter to the router and connect to an outlet or power strip. Wait about 30 seconds for
the router to boot.
7. Turn on your computer.
8. Refer to page 15 to configure your router.
Connect to Cable/DSL/Satellite Modem

12D-Link DGL-4500 User Manual
Section 2 - Installation
If you are connecting the D-Link router to another router to use as a wireless access point and/or switch, you will have
to do the following before connecting the router to your network:
• Disable UPnP™
• Disable DHCP
• Change the LAN IP address to an available address on your network. The LAN ports on the router cannot
accept a DHCP address from your other router.
To connect to another router, please follow the steps below:
1. Plug the power into the router. Connect one of your computers to the router (LAN port) using an Ethernet cable.
Make sure your IP address on the computer is 192.168.0.xxx (where xxx is between 2 and 254). Please see the
Networking Basics section for more information. If you need to change the settings, write down your existing settings
before making any changes. In most cases, your computer should be set to receive an IP address automatically in
which case you will not have to do anything to your computer.
2. Open a web browser and enter http://192.168.0.1 and press Enter. When the login window appears, set the user
name to Admin and leave the password box empty. Click Log In to continue.
3. Click on Advanced and then click Advanced Network. Uncheck the Enable UPnP checkbox. Click Save Settings
to continue.
4. Click Setup and then click Network Settings. Uncheck the Enable DHCP Server checkbox. Click Save Settings
to continue.
5. Under Router Settings, enter an available IP address and the subnet mask of your network. Click Save Settings to
save your settings. Use this new IP address to access the configuration utility of the router in the future. Close the
browser and change your computer’s IP settings back to the original values as in Step 1.
Connect to Another Router

13D-Link DGL-4500 User Manual
Section 2 - Installation
6. Disconnect the Ethernet cable from the router and reconnect your computer to your network.
7. Connect an Ethernet cable in one of the LAN ports of the router and connect it to your other router. Do not plug
anything into the Internet port of the D-Link router.
8. You may now use the other 3 LAN ports to connect other Ethernet devices and computers.To configure your wireless
network, open a web browser and enter the IP address you assigned to the router. Refer to the Configuration and
Wireless Security sections for more information on setting up your wireless network.

14D-Link DGL-4500 User Manual
Section 2 - Installation
The DGL-4500 includes a Quick Router Setup Wizard CD. Follow the simple steps below to run the Setup Wizard to
guide you quickly through the installation process. You may manually configure your router without the wizard. Refer
to the next page to manually setup your router.
Insert the Quick Router Setup Wizard CD in the CD-ROM drive.The step-by-step instructions that follow are shown
in Windows®XP. The steps and screens are similar for the other Windows®operating systems.
If the CD autorun function does not automatically start on your computer, go to Start > Run. In the run box type
“D:\DGL4500.exe” (where D: represents the drive letter of your CD-ROM drive).
When the autorun screen appears, click BEGIN INSTALL
and follow the on-screen instructions.
Getting Started

15D-Link DGL-4500 User Manual
Section 3 - Configuration
Configuration
This section will show you how to configure your new D-Link wireless router using the web-based configuration
utility.
Web-based Configuration Utility
To access the configuration utility, open a web-browser
such as Internet Explorer and enter the IP address of
the router (192.168.0.1).
You may also enter the NetBIOS name (“dlinkrouter”) to
access the router. Enter http://dlinkrouter and press
Enter.
Select Admin from the drop-down menu and then enter
your password. Leave the password blank by default.
Type in the graphical authentication code (if you cannot
read it, click Regenerate).
If you get a Page Cannot be Displayed error, please
refer to the Troubleshooting section for assistance.