D-Link DIR-330 - Wireless G VPN Router User manual

iD-Link DIR-330 User Manual
Table of Contents
Manual Overview
This manual contains the following sections:
Section 1 - “Product Overview” describes what is included with the DIR-330 router, and things to consider
before installing (page 1).
Section 2 - “Installation” describes how to install the router on your network (page 6).
Section 3 - “Configuration” describes how to configure the settings on your DIR-330 router (page 11).
Section 4 - “Wireless Security” explains how to setup wireless encryption on your wireless router (page 62).
Section 5 - “Connect to a Wireless Network” explains how to configure your wireless clients to connect to your
router (page 71).
Section 6 - “Troubleshooting” explains how to resolve common issues (page 79).
Appendix - “Appendix” contains wireless and networking basics, technical specifications, technical support
information, warranty, GNU general public license, and registration information (page 83).

iiD-Link DIR-330 User Manual
Table of Contents
D-Link reserves the right to revise this publication and to make changes in the content hereof without obligation to
notify any person or organization of such revisions or changes.
Manual Revisions
Trademarks
D-Link and the D-Link logo are trademarks or registered trademarks of D-Link Corporation or its subsidiaries in the
United States or other countries. All other company or product names mentioned herein are trademarks or registered
trademarks of their respective companies.
Copyright © 2007 by D-Link Systems, Inc.
All rights reserved.This publication may not be reproduced, in whole or in part, without prior expressed written permission
from D-Link Systems, Inc.
Revision Date Description
1.0 January 15, 2007 • DIR-330 Revision A1 with firmware version 1.00
1.1 September 13, 2007 • Updated for firmware version 1.10
• Added Windows Vista™support

iiiD-Link DIR-330 User Manual
Table of Contents
Manual Overview ..........................................................i
Manual Revisions .................................................... ii
Trademarks.............................................................. ii
Product Overview ........................................................ 1
Package Contents....................................................1
System Requirements .............................................2
Features...................................................................3
Hardware Overview .................................................4
Connections....................................................... 4
LEDs ..................................................................5
Installation....................................................................6
Before you Begin .....................................................6
Wireless Installation Considerations........................ 7
Connect to Cable/DSL/Satellite Modem ..................8
Connect to Another Router......................................9
Configuration.............................................................11
Web-based Configuration Utility ............................11
Setup Wizard ................................................... 12
Manual Configuration.......................................17
Dynamic (DHCP)..........................................17
PPPoE (DSL) ............................................... 18
PPTP............................................................19
L2TP.............................................................20
Big Pond....................................................... 21
Static IP........................................................22
Russian PPPoE............................................ 23
Russian PPTP.............................................. 25
Wireless Settings .............................................26
Wi-Fi Protected Setup (WCN 2.0) ................26
Wireless Network Settings ...........................27
Network Settings..............................................28
DHCP Server Settings ................................. 29
DHCP Reservation....................................... 30
VPN Settings ................................................... 31
IPSec Settings..............................................32
PPTP/L2TP Settings ....................................35
Port Forwarding ............................................... 36
Application Rules .............................................37
MAC Filters ...................................................... 38
Website Filters ................................................. 39
Firewall Settings...............................................40
DMZ .............................................................40
Firewall Rules...............................................41
Advanced Wireless Settings ............................ 42
Tx Rate.........................................................42
DTIM Interval................................................42
Preamble...................................................... 42
WMM Function .............................................42
Advanced Network Settings.............................43
UPnP............................................................43
WAN Ping Respond .....................................43
WAN Port Speed ..........................................43
Table of Contents

ivD-Link DIR-330 User Manual
Table of Contents
Routing ............................................................44
Certificates....................................................... 45
User Groups .................................................... 46
Administrator Settings......................................47
Change Password ........................................47
Remote Management...................................47
Time and Date Settings ...................................48
System Settings............................................... 49
Update Firmware ............................................. 50
DDNS...............................................................51
System Check..................................................52
Schedules ........................................................53
Log Settings..................................................... 54
Device Information ........................................... 55
Log................................................................... 56
Statistics ..........................................................57
Active Session ................................................. 58
Wireless Clients ...............................................59
LAN Clients...................................................... 59
Routing ............................................................60
VPN .................................................................60
Help .................................................................61
Wireless Security.......................................................62
What is WEP?........................................................62
What is WPA? ........................................................ 63
Wireless Security Setup Wizard ............................64
Configure WEP ......................................................68
Configure WPA/WPA2-PSK ................................... 69
Configure WPA/WPA2-EAP (RADIUS) .................. 70
Connect to a Wireless Network ................................71
Using Windows Vista™.............................................................................. 71
Configure WEP/WPA/WPA2............................. 72
Using Windows®XP............................................... 74
Configure WEP ................................................75
Configure WPA-PSK ........................................77
Troubleshooting.........................................................79
Wireless Basics .........................................................83
What is Wireless? .................................................. 84
Tips........................................................................86
Wireless Modes .....................................................87
Networking Basics .................................................... 88
Check your IP address ..........................................88
Statically Assign an IP address ............................. 89
Technical Specifications...........................................91
Default Factory Settings ........................................... 92
Contacting Technical Support..................................93
Warranty .....................................................................94
GNU/Linux GPL........................................................100
GNU General Public License............................... 101
Registration..............................................................107

1D-Link DIR-330 User Manual
Section 1 - Product Overview
Product Overview
Package Contents
Note: Using a power supply with a different voltage rating than the one included with the DIR-330 will cause damage and void the warranty for this
product.
D-Link DIR-330 Wireless
VPN Router
Power Adapter
Ethernet Cable
CD-ROM

2D-Link DIR-330 User Manual
Section 1 - Product Overview
Network Requirements
• An Ethernet-based Cable or DSL modem
• 802.11g/b wireless clients
• 10/100 Ethernet devices
Web-based Configuration
Utility Requirements
Computer with the following:
• Windows®, Macintosh, or Linux-based operating
system
• An installed Ethernet adapter
Browser Requirements:
• Internet Explorer 6.0 or higher
• Mozilla 1.7.12 or higher
• Firefox 1.5 or higher
• Safari 1.0 or higher (with Java 1.3.1 or higher)
• Flock 0.7.14 or higher
• Opera 6.0 or higher
Windows®Users: Make sure you have the latest version
of Java installed. Visit www.java.com to download the
latest version.
System Requirements

3D-Link DIR-330 User Manual
Section 1 - Product Overview
• Faster Wireless Networking - The DIR-330 provides up to 54Mbps* wireless connection with other
802.11g wireless clients. This capability allows users to participate in real-time activities online, such as
video streaming, online gaming, and real-time audio.
• Compatible with 802.11b Devices - The DIR-330 is still fully compatible with the IEEE 802.11b standard,
so it can connect with existing 802.11b PCI, USB and Cardbus adapters.
• Advanced Firewall Features - The Web-based user interface displays a number of advanced network
management features including:
• Parental Controls - Easily applied content filtering based on MAC Address, URL, and/or
Domain Name.
• Filter Scheduling - These filters can be scheduled to be active on certain days or for a
duration of hours or minutes.
• Secure Multiple/Concurrent Sessions - The DIR-330 can pass through VPN sessions. It
supports multiple and concurrent IPSec and PPTP sessions, so users behind the DIR-330
can securely access corporate networks.
* Maximum wireless signal rate derived from IEEE Standard 802.11g specifications. Actual data throughput will vary. Network conditions and environmental factors,
including volume of network traffic, building materials and construction, and network overhead, lower actual data throughput rate. Environmental conditions will
adversely affect wireless signal range.
Features

4D-Link DIR-330 User Manual
Section 1 - Product Overview
Hardware Overview
Connections
Reset
Pressing the Reset button restores the router to
its original factory default settings.
Power Receptor
Receptor for the supplied power
adapter.
LAN Ports (1-4)
Connect Ethernet devices such as
computers, switches, and hubs.
Internet Port
The auto MDI/MDIX Internet
port is the connection for the
Ethernet cable to the cable or
DSL modem.
* The USB port is currently inactive.

5D-Link DIR-330 User Manual
Section 1 - Product Overview
Hardware Overview
LEDs
WLAN LED
A solid light indicates that the wireless
segment is ready. This LED blinks
during wireless data transmission.
Status LED
A blinking light indicates that the
DIR-330 is ready.
Internet LED
A solid light indicates connection on
the Internet port. This LED blinks
during data transmission.
Power LED
A solid light indicates a
proper connection to the
power supply.
Local Network LEDs
A solid light indicates a connection to an
Ethernet-enabled computer on ports 1-4.
This LED blinks during data transmission.

6D-Link DIR-330 User Manual
Section 2 - Installation
Before you Begin
Installation
This section will walk you through the installation process. Placement of the router is very important. Do not place the
router in an enclosed area such as a closet, cabinet, or in the attic or garage.
Please configure the router with the computer that was last connected directly to your modem. Also, you can only use
the Ethernet port on your modem. If you were using the USB connection before using the router, then you must turn off
your modem, disconnect the USB cable and connect an Ethernet cable to the Internet port on the router, and then turn
the modem back on. In some cases, you may need to call your ISP to change connection types (USB to Ethernet).
If you have DSL and are connecting via PPPoE, make sure you disable or uninstall any PPPoE software such as
WinPoet, Broadjump, or Enternet 300 from your computer or you will not be able to connect to the Internet.

7D-Link DIR-330 User Manual
Section 2 - Installation
Wireless Installation Considerations
The D-Link wireless router lets you access your network using a wireless connection from virtually anywhere within
the operating range of your wireless network. Keep in mind, however, that the number, thickness and location of walls,
ceilings, or other objects that the wireless signals must pass through, may limit the range.Typical ranges vary depending
on the types of materials and background RF (radio frequency) noise in your home or business. The key to maximizing
wireless range is to follow these basic guidelines:
1. Keep the number of walls and ceilings between the D-Link router and other network devices to a minimum
- each wall or ceiling can reduce your adapter’s range from 3-90 feet (1-30 meters.) Position your devices
so that the number of walls or ceilings is minimized.
2. Be aware of the direct line between network devices. A wall that is 1.5 feet thick (.5 meters), at a
45-degree angle appears to be almost 3 feet (1 meter) thick. At a 2-degree angle it looks over 42 feet
(14 meters) thick! Position devices so that the signal will travel straight through a wall or ceiling (instead
of at an angle) for better reception.
3. Building Materials make a difference. A solid metal door or aluminum studs may have a negative effect on
range. Try to position access points, wireless routers, and computers so that the signal passes through
drywall or open doorways. Materials and objects such as glass, steel, metal, walls with insulation, water
(fish tanks), mirrors, file cabinets, brick, and concrete will degrade your wireless signal.
4. Keep your product away (at least 3-6 feet or 1-2 meters) from electrical devices or appliances that
generate RF noise.
5. If you are using 2.4GHz cordless phones or X-10 (wireless products such as ceiling fans, lights, and
home security systems), your wireless connection may degrade dramatically or drop completely. Make
sure your 2.4GHz phone base is as far away from your wireless devices as possible. The base transmits
a signal even if the phone in not in use.

8D-Link DIR-330 User Manual
Section 2 - Installation
If you are connecting the router to a cable/DSL/satellite modem, please follow the steps below:
1. Place the router in an open and central location. Do not plug the power adapter into the router.
2. Turn the power off on your modem. If there is no on/off switch, then unplug the modem’s power adapter. Shut down
your computer.
3. Unplug the Ethernet cable (that connects your computer to your modem) from your computer and place it into the
Internet port on the router.
4. Plug an Ethernet cable into one of the four LAN ports on the router. Plug the other end into the Ethernet port on your
computer.
5. Turn on or plug in your modem. Wait for the modem to boot (about 30 seconds).
6. Plug the power adapter to the router and connect to an outlet or power strip. Wait about 30 seconds for the router
to boot.
7. Turn on your computer.
8. Verify the link lights on the router. The power light, Internet light, and the LAN light (the port that your computer is
plugged into) should be lit. If not, make sure your computer, modem, and router are powered on and verify the cable
connections are correct.
9. Refer to page 11 to configure your router.
Connect to Cable/DSL/Satellite Modem

9D-Link DIR-330 User Manual
Section 2 - Installation
If you are connecting the D-Link router to another router to use as a wireless access point and/or switch, you will have
to do the following before connecting the router to your network:
• Disable UPnP™
• Disable DHCP
• Change the LAN IP address to an available address on your network.The LAN ports on the router cannot
accept a DHCP address from your other router.
To connect to another router, please follow the steps below:
1. Plug the power into the router. Connect one of your computers to the router (LAN port) using an Ethernet cable.
Make sure your IP address on the computer is 192.168.0.xxx (where xxx is between 2 and 254). Please see the
Networking Basics section for more information. If you need to change the settings, write down your existing settings
before making any changes. In most cases, your computer should be set to receive an IP address automatically in
which case you will not have to do anything to your computer.
2. Open a web browser and enter http://192.168.0.1 and press Enter. When the login window appears, set the user
name to Admin and leave the password box empty. Click Log In to continue.
3. Click on Advanced and then click Advanced Network. Uncheck the Enable UPnP checkbox. Click Save Settings
to continue.
4. Click Setup and then click Network Settings. Uncheck the Enable DHCP Server checkbox. Click Save Settings
to continue.
5. Under Router Settings, enter an available IP address and the subnet mask of your network. Click Save Settings to
save your settings. Use this new IP address to access the configuration utility of the router in the future. Close the
browser and change your computer’s IP settings back to the original values as in Step 1.
Connect to Another Router

10D-Link DIR-330 User Manual
Section 2 - Installation
6. Disconnect the Ethernet cable from the router and reconnect your computer to your network.
7. Connect an Ethernet cable in one of the LAN ports of the router and connect it to your other router. Do not plug
anything into the Internet port of the D-Link router.
8. You may now use the other 3 LAN ports to connect other Ethernet devices and computers.To configure your wireless
network, open a web browser and enter the IP address you assigned to the router. Refer to the Configuration and
Wireless Security sections for more information on setting up your wireless network.

11D-Link DIR-330 User Manual
Section 3 - Configuration
Configuration
This section will show you how to configure your new D-Link wireless router using the web-based configuration
utility.
Web-based Configuration Utility
To access the configuration utility, open a web-browser such
as Internet Explorer and enter the IP address of the router
(192.168.0.1).
Enter admin as the User name field and enter the password
in the Password field. Leave the password blank by default.
If you get a Page Cannot be Displayed error, please refer
to the Troubleshooting section for assistance.

12D-Link DIR-330 User Manual
Section 3 - Configuration
Setup Wizard
You may click Setup Wizard to quickly configure your router.
If you want to enter your settings without running the wizard, click
Manual Configure and skip to page 17.
If you want to configure your wireless settings using the Wireless
Security Setup Wizard, skip to page 64.
Click Next to continue.
Create a new password and then click Next to continue.

13D-Link DIR-330 User Manual
Section 3 - Configuration
Select your time zone from the drop-down menu and then click Next
to continue.
Select the type of Internet connection you use and then click Next
to continue.
If you selected Dynamic, you may need to enter the MAC address of
the computer that was last connected directly to your modem. If you are
currently using that computer, click CloneYour PC’s MAC Address and
then click Next to continue.
The Host Name is optional but may be required by some ISPs.The default
host name is the device name of the Router and may be changed.

14D-Link DIR-330 User Manual
Section 3 - Configuration
If you selected PPPoE, enter your PPPoE username and password. Click
Next to continue.
Select Static if your ISP assigned you the IP address, subnet mask, gateway,
and DNS server addresses.
Note: Make sure to remove your PPPoE software from your computer. The
software is no longer needed and will not work through a router.
If you selected PPTP, enter your PPTP username and password.Click Next
to continue.
If you selected L2TP, enter your L2TP username and password. Click Next
to continue.

15D-Link DIR-330 User Manual
Section 3 - Configuration
If you selected Static, enter your network settings supplied by your Internet
provider. Click Next to continue.
If you selected Big Pond, select your authentication server from the drop
down menu. You will also need to enter your Big Pond username and
password. Click Next to continue.
If you selected PPPoE, enter your PPPoE username and password. Click
Next to continue.
Select Static if your ISP assigned you the IP address, subnet mask, gateway,
and DNS server addresses.
Note: Make sure to remove your PPPoE software from your computer. The
software is no longer needed and will not work through a router.