D-Link DIR-632 User manual

Quick Installation Guide
DIR-632
Multifunction Wireless Router
Supporting WiMAX, 3G GSM/CDMA
wit Built-in 8-port Switc

DIR-632 Quick Installation Guide
BEFORE YOU BEGIN
Delivery Package
•Wireless router DIR-632
•Power adapter DC 5V/2.5A
•Ethernet able (CAT 5E)
•“Quick Installation Guide” (bro hure).
If any of the items are missing, please onta t your reseller.
The “User Manual” and “Quick Installation Guide” do uments in Russian
and English are available on D-Link website (see ftp.dlink.ru/pub/Router/DIR-
632/Des ription/).
!Using a power supply with a different voltage rating than the one
included will cause damage and void the warranty for this product.
Default Settings
IP address o wireless router 192.168.0.1
Username (login) admin
Password admin
Name o wireless network (SSID) DIR-632
2

DIR-632 Quick Installation Guide
System Requirements and Equipment
•A omputer with any operating system that supports a web browser.
•A web browser to a ess the web-based interfa e of the router: Windows
Internet Explorer, Mozilla Firefox, or Opera.
•A NIC (Ethernet or Wi-Fi adapter) to onne t to the router.
•An 802.11b, g, or n Wi-Fi adapter to reate a wireless network.
•A USB modem to onne t to the Internet1.
◦A WiMAX USB modem to onne t to the Internet via a WiMAX
network.
!
Some WiMAX operators require subs ribers to a tivate their WiMAX
USB modems prior to using them. Please, refer to onne tion
guidelines provided by your operator when on luding the agreement
or pla ed on its website.
◦A 3G USB modem to onne t to the Internet via a 3G GSM or
CDMA network.
!
Your USB modem should be equipped with an a tive identifi ation
ard (SIM or R-UIM) of your operator.
For CDMA USB modems, it is required to disable the PIN ode he k
on the identifi ation ard prior to onne ting the USB modem to the
router.
1 Conta t your operator to get information on the servi e overage and fees.
3

DIR-632 Quick Installation Guide
Supported USB Modems
GSM modems:
•Huawei E1550
•Huawei E160G
•Huawei E169G
•Huawei E171
•Huawei E220
•ZTE MF112
•ZTE MF192
•ZTE MF626
•ZTE MF627
•ZTE MF652
•ZTE MF668
•ZTE MF752.
CDMA modems2:
•Airplus MCD-650
•Airplus MCD-800
•AnyDATA ADU-300A
•AnyDATA ADU-310A
•Axesstel MV110
•Ubiquam UM-400
•WeTele om WM-D200.
iMAX modem:
•Samsung SWC-U200 (firmware version u200_rev1-2.7.40-CI14).
!The manufa turer does not guarantee proper operation of the router
with every modifi ation of the firmware of USB modems.
2 Performan e of CDMA USB modems is not tested for the urrent firmware version.
4

DIR-632 Quick Installation Guide
CONNECTING TO PC
PC wit Et ernet Adapter
1. Make sure that your PC is powered off.
2. Conne t an Ethernet able between any of LAN ports lo ated on the ba k
panel of the router and the Ethernet port of your PC.
3. To onne t via a WiMAX, 3G GSM or CDMA network: onne t your
USB modem to the USB port3 lo ated on the ba k panel of the router.
!If you need to onne t or hange a USB modem to another one when
the router is powered on, power off the router, onne t the modem to
the USB port, and power on the router.
4. Conne t the power ord to the power onne tor port on the ba k panel of
the router, then plug the power adapter into an ele tri al outlet or power
strip.
5. Turn on your PC and wait until your operating system is ompletely
loaded.
Now you should onfigure your PC to obtain an IP address automati ally (as
DHCP lient).
3 It is re ommended to use a USB extension able to onne t a USB modem to the
router.
5

DIR-632 Quick Installation Guide
Obtaining IP Address Automatically
in OS Windows XP
1. Cli k the Start button and pro eed to the Control Panel > Network
and Internet Connections > Network Connections window.
2. In the Network Connections window, right- li k the relevant Local
Area Connection i on and sele t the Properties line in the menu
displayed.
3. In the Local Area Connection Properties window, on the General
tab, sele t the Internet Protocol (TCP/IP) line. Cli k the Properties
button.
6

DIR-632 Quick Installation Guide
4. Sele t the Obtain an IP address automatically and Obtain DNS
server address automatically radio buttons. Cli k the OK button.
5. Cli k the ОК button in the onne tion properties window.
Now your omputer is onfigured to obtain an IP address automati ally.
7

DIR-632 Quick Installation Guide
Obtaining IP Address Automatically
in OS Windows 7
1. Cli k the Start button and pro eed to the Control Panel window.
2. Sele t the Network and Sharing Center se tion. (If the Control Panel
has the ategory view (the Category value is sele ted from the View by
drop-down list in the top right orner of the window), hoose the View
network status and tasks line under the Network and Internet
se tion.)
3. In the menu lo ated on the left part of the window, sele t the Change
adapter settings line.
4. In the opened window, right- li k the relevant Local Area Connection
i on and sele t the Properties line in the menu displayed.
5. In the Local Area Connection Properties window, on the
Networking tab, sele t the Internet Protocol Version 4 (TCP/IPv4)
line. Cli k the Properties button.
8

DIR-632 Quick Installation Guide
6. Sele t the Obtain an IP address automatically and Obtain DNS
server address automatically radio buttons. Cli k the OK button.
7. Cli k the OK button in the onne tion properties window.
Now your omputer is onfigured to obtain an IP address automati ally.
9

DIR-632 Quick Installation Guide
PC wit Wi-Fi Adapter
1. To onne t via a WiMAX, 3G GSM or CDMA network: onne t your
USB modem to the USB port4 lo ated on the ba k panel of the router.
!If you need to onne t or hange a USB modem to another one when
the router is powered on, power off the router, onne t the modem to
the USB port, and power on the router.
2. Conne t the power ord to the power onne tor port on the ba k panel of
the router, then plug the power adapter into an ele tri al outlet or power
strip.
3. Turn on your PC and wait until your operating system is ompletely
loaded.
4. Turn on your Wi-Fi adapter. As a rule, modern notebooks with built-in
wireless NICs are equipped with a button or swit h that turns on/off the
wireless adapter (refer to your PC do uments). If your PC is equipped
with a pluggable wireless NIC, install the software provided with your
Wi-Fi adapter.
Now you should onfigure your Wi-Fi adapter.
4 It is re ommended to use a USB extension able to onne t a USB modem to the
router.
10

DIR-632 Quick Installation Guide
Configuring Wi-Fi Adapter in OS Windows XP
1. Cli k the Start button and pro eed to the Control Panel > Network
and Internet Connections > Network Connections window.
2. Sele t the i on of the wireless network onne tion and make sure that
your Wi-Fi adapter is on.
3. Sear h for available wireless networks.
4. In the opened Wireless Network Connection window, sele t the
wireless network DIR-632 and li k the Connect button.
After that the Wireless Network Connection Status window appears.
!
If you perform initial onfiguration of the router via Wi-Fi onne tion,
note that immediately after hanging the wireless default settings of the
router you will need to re onfigure the wireless onne tion using the
newly spe ified settings.
11

DIR-632 Quick Installation Guide
Configuring Wi-Fi Adapter in OS Windows 7
1. Cli k the Start button and pro eed to the Control Panel window.
2. Sele t the Network and Sharing Center se tion. (If the Control Panel
has the ategory view (the Category value is sele ted from the View by
drop-down list in the top right orner of the window), hoose the View
network status and tasks line under the Network and Internet
se tion.)
3. In the menu lo ated on the left part of the window, sele t the Change
adapter settings line.
4. In the opened window, sele t the i on of the wireless network onne tion
and make sure that your Wi-Fi adapter is on.
5. To open the list of available wireless networks, sele t the i on of the
wireless network onne tion and li k the Connect To button or left-
li k the network i on in the notifi ation area lo ated on the right side of
the taskbar.
12

DIR-632 Quick Installation Guide
6. In the opened window, in the list of available wireless networks, sele t the
wireless network DIR-632 and li k the Connect button.
7. Wait for about 20-30 se onds. After the onne tion is established, the
network i on will be displayed as the signal level s ale.
!
If you perform initial onfiguration of the router via Wi-Fi onne tion,
note that immediately after hanging the wireless default settings of the
router you will need to re onfigure the wireless onne tion using the
newly spe ified settings.
13

DIR-632 Quick Installation Guide
CONFIGURING ROUTER
Connecting to Web-based Interface
1. Start a web browser.
2. In the address bar of the web browser, enter the IP address of the router
(by default, the following IP address is spe ified: 192.168.0.1). Press
the Enter key.
3. On the opened page, enter the username and password for the
administrator a ount in the Login and Password fields
orrespondingly (by default, the following username and password are
spe ified: admin, admin). Then li k the Enter link.
!
If the error “ The page cannot be displayed ” (or “ Unable to display the
page ”/“ Could not connect to re ote server ”) o urs upon onne ting to
the web-based interfa e of the router, make sure that you have properly
onne ted the router to your omputer.
14

DIR-632 Quick Installation Guide
Right after the first a ess to the web-based interfa e you are forwarded to the
page for hanging the administrator password spe ified by default.
Enter a new password in the Password and Con irmation fields (you may
use digits, Latin letters (upper ase and/or lower ase), and hara ters available
on the keyboard), then li k the Save link.
!
Remember or write down the new password for the administrator
a ount. In ase of losing the new password, you an a ess the settings
of the router only after restoring the fa tory default settings via the
hardware RESET button. This pro edure wipes out all settings that you
have onfigured for your router.
15

DIR-632 Quick Installation Guide
After su essful registration the router's qui k settings page opens.
The web-based interfa e of the router is multilingual. Sele t a needed language
from the menu displayed when the mouse pointer is over the Language
aption. You an hange the language of the web-based interfa e in any menu
item.
After sele ting the language, the notifi ation on unsaved hanges will be
displayed. Cli k the Save i on ( ) to save the urrent language of the
web-based interfa e as the default language.
16

DIR-632 Quick Installation Guide
The qui k settings page displays general information on the router and its
software (the version and the date of the firmware, the IP address of the
devi e, the name of the WLAN, et .).
On the qui k settings page, you an qui kly get to some pages of the web-
based interfa e or run a needed Wizard (use the links on the left side of the
page).
From the qui k settings page you an swit h to the advan ed settings se tion.
To do this, li k the Advanced settings link in the bottom right orner of
the page.
Also you an find a spe ifi page via sear h. To do this, enter the name of the
page, wholly or partly, in the sear h bar in the top part of the web-based
interfa e page, and then sele t a needed link in the sear h results.
17

DIR-632 Quick Installation Guide
Configuring Connection to t e Internet
!
You should onfigure your WAN onne tion in a ordan e with data
provided by your Internet servi e provider (ISP). Make sure that you
have obtained all ne essary information prior to onfiguring your
onne tion. Otherwise onta t your ISP.
WiMAX WAN Connection
1. If your operator spe ified an identifier for the WiMAX network, pro eed
to the WiMAX / In ormation page, enter the required value in the SSID
field and li k the Connect button.
2. Go to the Net / WAN page and li k the Add button.
3. In the General settings se tion, in the Provider drop-down list, leave
the Manually value.
4. From the Connection Type drop-down list, sele t the needed value.
5. From the Port drop-down list, sele t the USB-WIMAX value.
6. Spe ify a name for your onne tion (any name for easier identifi ation) in
the Name field.
7. For connection of PPPoE type: in the PPP se tion, enter authorization
data provided by your ISP (the username (login) in the Username field
and the password in the Password and Password con irmation
fields), or sele t the Without authorization he kbox if authorization
is not required.
18

DIR-632 Quick Installation Guide
8. For connection of Static IP type: in the IP se tion, fill in the IP
Address, Netmask, Gateway IP address, and Primary DNS
server fields.
9. For connection of Dynamic IP type: if your ISP has provided the address
of the DNS server, in the IP se tion, desele t the Obtain DNS server
addresses automatically he kbox and fill in the Primary DNS
server field.
19

DIR-632 Quick Installation Guide
10. For connection of PPTP + Static IP or L TP + Static IP type: in the IP
se tion, fill in the IP Address, Netmask, Gateway IP address, and
Primary DNS server fields. Then in the VPN se tion, enter
authorization data provided by your ISP (the username (login) in the
Username field and the password in the Password and Password
con irmation fields), or sele t the Without authorization he kbox if
authorization is not required. In the VPN server address field, enter
the IP or URL address of the PPTP or L2TP authenti ation server. If your
ISP applies en ryption, sele t a needed value from the Encryption drop-
down list.
20