D-Link DIR-850L User manual

0
HKBN_SETUP_ROUTER_DLINK_ENG_230315
D-Link Wireless Router
(DIR-850L) Setup User’s Guide

1
HKBN_SETUP_ROUTER_DLINK_ENG_230315
1 Get to know D-Link (DIR-850L) Wireless Router ................................................................2
A. Tech Specs - Connections and Expansion .................................................................2
B. System Requirements (bb500/ FibreHome500/ bb1000/ FibreHome1000) ................2
2 Connecting to D-Link Router...............................................................................................3
3 Switching your broadband Internet service to HKBN..........................................................9
4 Factory default reset of D-Link (DIR-850L) Router............................................................12

2
HKBN_SETUP_ROUTER_DLINK_ENG_230315
Get to know D-Link (DIR-850L)
Wireless Router
1 Get to know D-Link (DIR-850L) Wireless Router
A. Tech Specs - Connections and Expansion
B. System Requirements (bb500/ FibreHome500/ bb1000/ FibreHome1000)
To ensure that you have a fast and stable network, please refer to the following as a
recommended minimum system requirement:
Central Processing Unit (CPU) Intel Core2 Duo P8700/2.5 (3 GHz or above)
System Memory 4GB or above
Hard disk 64GB SATA II SSD (Min. I/O speed of 200MB/s)
Network Adaptor 100/1000M Network Adaptor
Power LED
Internet LED
USB 2.0 Port
WPS Button
Gigabit LAN Ports
Gigabit Internet Port
Power Switch
Power Connector

3
HKBN_SETUP_ROUTER_DLINK_ENG_230315
Connecting to D-Link router
2 Connecting to D-Link Router
Make sure you have a LAN cable connected from the HKBN wall plate/ONT to the Internet
port of your D-Link Router (DIR-850L). Using a second LAN cable, connect it from the Router
LAN port to the computer LAN port. Once finished, switch on the power supply for the router
and turn on the computer.
Open your Internet browser, and input [http://192.168.0.1] into the address-bar then press
[Enter]. Leave the password box empty and click [Log In].

4
HKBN_SETUP_ROUTER_DLINK_ENG_230315
Connecting to D-Link Router
2 Connecting to D-Link Router
Click [Wizard] under [Settings] to begin setup.

5
HKBN_SETUP_ROUTER_DLINK_ENG_230315
Connecting to D-Link Router
2 Connecting to D-Link Router
Click [Next] after the [Wizard] page appears.
Wizard will configure the Internet connection automatically.

6
HKBN_SETUP_ROUTER_DLINK_ENG_230315
Connecting to D-Link Router
2 Connecting to D-Link Router
D-LINK Wireless Router (DIR-850L) supports both 2.4GHz and 5GHz wireless connections.
After creating the network name (SSID) and security key for both connections, click [Next].
Create a [Device Admin Password], click [Next].

7
HKBN_SETUP_ROUTER_DLINK_ENG_230315
Connecting to D-Link Router
2 Connecting to D-Link Router
Confirm all settings displayed are correct in the [Summary] page then click [Next].
If you do not create a “mydlink” account, choose [No, I want to create a new mydlink
account], click [Next].

8
HKBN_SETUP_ROUTER_DLINK_ENG_230315
Connecting to D-Link Router
2 Connecting to D-Link Router
Click [Finish] to complete the setup.

9
HKBN_SETUP_ROUTER_DLINK_ENG_230315
Switching your broadband
Internet service to HKBN
3 Switching your broadband Internet service to HKBN
After logging into the router through your browser, click [Internet] under [Settings].
Choose [Dynamic IP(DHCP)] under [My Internet Connection is], then click [Save].

10
HKBN_SETUP_ROUTER_DLINK_ENG_230315
Switching your broadband
Internet service to HKBN
3 Switching your broadband Internet service to HKBN
Wait for the device to apply the changes.
When the router has finished the update, click [OK] to complete the setup.

11
HKBN_SETUP_ROUTER_DLINK_ENG_230315
Switching your broadband
Internet service to HKBN
3 Switching your broadband Internet service to HKBN
Confirm the [Connection Type] has been changed to [Dynamic IP (DHCP)] under [Internet].

12
HKBN_SETUP_ROUTER_DLINK_ENG_230315
Factory default reset of D-
Link (DIR-850L) Router
Factory default reset of
LevelOne Router
4 Factory default reset of D-Link (DIR-850L) Router
If the device is no't accessible from the router setting page, you can reset to factory default
setting by pressing the reset button:
1. Confirm the D-Link router is switched on.
2. Press and hold the reset button using a sharp object about ten seconds until the Power
LED turns from orange to green.
3. Default Setting:
Password IP Address
Nil(Blank) 192.168.0.1
The Reset Button is located at the bottom of the device.
Reset Button (Bottom side)