D-Link DIR-868L Manual

Technical Support Setup Procedure
Page 1 of 3
How to setup Repeater mode on DIR-868L (Ax)?
Step 1: Connect your laptop or PC to the router by using a Network Cable.
Step 2: Open a web browser such as Internet Explorer, Mozilla Firefox or Google Chrome.
On the address bar of the web browser type in there the IP Address of the router and then
press the Enter key on your keyboard.
Step 3: A login screen will appear, select the User Name as “Admin” and leave the
Password field blank and then click on the Log In button.
Step 4: Click on SETUP tab, then Click on INTERNET on the left hand side, then Click on
Manual Internet Connection Setup.

Technical Support Setup Procedure
Page 2 of 3
Step 5: By default the router has is Wireless Router. You need change it to Wireless
Repeater Extender.
Step 6: Then click on save settings to continue
Step 7: It will reboot the router
Step 8: Make sure NO Network Cable is plugged into INTERNET PORT
Step 9: Key in the IP address http://192.168.0.50 or http://dlinkrouter.local at browser
Step 10: Login the User Name as “Admin” and leave the Password field blank and then
click on the Log In button.

Technical Support Setup Procedure
Page 3 of 3
Step 11: Click on SETUP tab, then Click on Wireless Settings on the left hand side, then
Click on Manual Wireless Connection Setup.
Step 12: Click the scan button and scan the wireless network. Choose the wireless network
and key in wireless password. Save the settings after complete the task.
--- END ---