D-Link DSL-2640B User manual

2D-Link DSL-2640B Quick Install Guide
• ADSL2/2+ 4-Port Wireless Router
• 12VDC, 1A DC CEC-compliant switching power adapter
• RJ-11 telephone cable
• RJ-45 Ethernet cable
• Quick Install Guide
• CD-ROM (User Manual + QIG)
General Information
The D-Link DSL-2640B is an ADSL2+ wireless router, that combines
a DSL router and wireless solution in a single device. The DSL-2640B
also has four addional 10/100Mbps Ethernet ports to connect
non-wireless computers.This user manual provides you with a simple
and easy-to-understand format to install and configure your router.
Package Contents
Note: Using a power supply with a different voltage rating than the
one included with the DSL-2640B will cause damage and void the
warranty for this product.
If any of the above items are missing, please contact your reseller.

3 D-Link DSL-2640B Quick Install Guide
Important Safety Instructions
• Place your router on a flat surface close to the cables in a location
with sufficient ventilation.
• To prevent overheating, do not obstruct the ventilation openings of
this equipment.
• Plug this equipment into a surge protector to reduce the risk of
damage from power surges and lightning strikes.
• Operate this equipment only from an electrical outlet with the correct
power source as indicated on the adapter.
• Do not open the cover of this equipment. Opening the cover will void
any warranties on the equipment.
• Unplug equipment first before cleaning. A damp cloth can be used
to clean the equipment. Do not use liquid/aerosol cleaners or
magnetic/static cleaning devices.

4D-Link DSL-2640B Quick Install Guide
Front Panel View
Status LED
A blinking light indicates
traffic is passing through.
Power LED
A solid green light
indicates the unit
is powered up.
DSL LED
A Solid light indicates the DSL is synchronized.
A flashing LED indicates the router is attempting
to synchronize with the DSL provider.
Internet LED
A solid green light indicates
that the router has an IP
address and is connected to
the internet.
WLAN LED
A solid green light indicates the
wireless is operational. A flashing
green light indicates wireless traffic is
passing through the router.
Local Network LED
A solid light indicates a connection
to an Ethernet-enabled computer.
This LED blinks during data
transmission.

5 D-Link DSL-2640B Quick Install Guide
Rear Panel View
LAN Ports
Connect Ethernet devices
such as computers, switches,
and hubs.
ON/OFF
Press this button to
turn the unit on or off.
Power Receptor
Receptor for the supplied
power adapter.
Reset
Pressing the Reset button restores the router
to its original factory default settings.
Console
For use by D-Link service personnel
for maintenance purposes only.
DSL Line
Connect to an active
telephone line (RJ-11).

6D-Link DSL-2640B Quick Install Guide
Installing the Router
Connect the ADSL and Telephone Lines
• Connect an RJ-11 cable between the wall phone jack and the line-
end of the splitter (see diagram below).
• Attach another RJ-11 phone cable to the router-end of the splitter
and the ADSL port on the rear panel of the router.
• The phone-end of the splitter will be connected to the telephone
using a third RJ-11 phone cable.
Note: See connections on the installation diagram.
Connect the PC to the Router
• To use the Ethernet connection, connect the Ethernet cable from
the computer directly to the router. Connect one end of the Ethernet
cable to the port labeled LAN on the back of the router and attach
the other end to the Ethernet port of your computer.
• If your LAN has more than one computer, you can attach one
end of an Ethernet cable to a hub or a switch and the other to
the Ethernet port (labeled LAN) on the router. Note that either a
crossover or straight-through Ethernet cable can be used.The router
automatically recognizes the type of connection that is required.

7 D-Link DSL-2640B Quick Install Guide
Connect the Power Adapter
• Complete the process by connecting the supplied 12VAC, 1A power
adapter to the POWER connector on the back of the device and
plug the adapter into a wall outlet or power strip. Then turn on and
boot up your PC and any LAN devices, such as hubs or switches,
and any computers connected to them.
Note: For procedures on configuring your computer, please see
“Configuring Your Computer” in the manual.
Installation Diagram

8D-Link DSL-2640B Quick Install Guide
Log in to the Router
This section will explain how to log in to your router using the following
steps:
1. Launch your web browser.
2. Enter the URL http://192.168.1.1 in the address bar and press
Enter.
A login screen like the one below will be displayed after you connect
to the user interface.
3. Enter your user name and password, and then click OK to display
the user interface.
Note: There are three account types, each requiring a different
username and password.
• The user account provides limited access to certain configurations
(username / password: user / user).
• The admin account can perform all functions
(username / password: admin / admin).
• The support account is for ISP technicians for maintenance purposes
(username / password: support / support).
Note: Passwords can be changed at any time.
To quickly configure the router, please see the Wizard section in the
manual.

9 D-Link DSL-2640B Quick Install Guide
Notes

10D-Link DSL-2640B Quick Install Guide
Notes