D-Link Verizon DSL-2750B User manual

WIRELESS N300 ADSL2+ MODEM ROUTER + USB
DSL-2750B
QUICK SETUP GUIDE
* PPPoE
* PPPoA
* BRIDGE MODE
* ETHERNET WAN
MANUAL INSTALLATION,
WEB INTERFACE ONLY

DSL-2750B
2
ENGLISH
1. ACCESSING THE WEB UI
To access the Web UI of the DSL-2750B, connect your computer to the DSL-2750B using the
ethernet cable provided. Then connect the power cable to the DSL-2750B. The power light will
display as solid green.
Then simply open a browser window and enter the IP address in the browser address eld:
Please jump to the below section for your Internet Connection type:
2. PPPoE (Australian Users)
3. PPPoA (New Zealand Users)
4. Bridge Mode (If you want to use this Router as a Modem only)
5. Ethernet WAN Mode (NBN / UFB Customers)
IP ADDRESS: http://192.168.1.1
USERNAME: admin
PASSWORD: admin
WEB UI

DSL-2750B 3
ENGLISH
2. SETUP PPPoE CONNECTION
Once you have successfully accessed the Web UI of the DSL-2750B you will need to go to the
following location to congure your PPPoE settings.
SETUP > WIZARD
Click on the Setup Wizard button to start the wizard, below we will go through the required settings
to setup a PPPoE connection.
Click on Next to start the Setup Wizard.
It is recommeded to setup a new password for your DSL-2750B. Please enter the current password
"admin" and then enter a new password below. Once you have entered your new passwords click on
Next.
PPP over Ethernet (Australia)

DSL-2750B
4
ENGLISH
It is recommended to congure the Time Settings to synchronise with the Internet Time Servers.
Please enable the check box and select your Time Zone, then click Next.
In this example we will be conguring the Internet connection as PPPoE which is the most common
for Australian users.
2. Cont...
PPP over Ethernet (Australia)

DSL-2750B 5
ENGLISH
Ensure the WAN Services type is set as DSL. Select Australia from the Country selection dropdown,
then select your Internet Service Provider (ISP) from the list. Once you have selected these two
entries, you will notice the majority of the elds are completed for you. Lastly enter your Username
and Passwords that have been provided by your ISP. Click on Next when you have entered your
information.
If you wish to use Wireless on your router you will now be able to congure it below. It is
recommended to change the Wireless Network Name and also use WPA2-PSK for security.
Once you have made the required changes click on Next.
2. Cont...
PPP over Ethernet (Australia)

DSL-2750B
6
ENGLISH
Please review the details to ensure they are correct. Click on Apply to make the changes effective
immediately.
You should now have an active Internet Connection.
2. Cont...
PPP over Ethernet (Australia)

DSL-2750B 7
ENGLISH
3. SETUP PPPoA CONNECTION
PPP over ATM (New Zealand)
Once you have successfully accessed the Web UI of the DSL-2750B you will need to go to the
following location to congure your PPPoA settings.
SETUP > WIZARD
Click on the Setup Wizard button to start the wizard, below we will go through the required settings
to setup a PPPoA connection.
Click on Next to start the Setup Wizard.
It is recommeded to setup a new password for your DSL-2750B. Please enter the current password
"admin" and then enter a new password below. Once you have entered your new passwords click on
Next.

DSL-2750B
8
ENGLISH
3. Cont...
PPP over ATM (New Zealand)
It is recommended to congure the Time Settings to synchronise with the Internet Time Servers.
Please enable the check box and select your Time Zone, then click Next.
In this example we will be conguring the Internet connection as PPPoA which is the most common
for New Zealand users.

DSL-2750B 9
ENGLISH
3. Cont...
PPP over ATM (New Zealand)
Ensure the WAN Services type is set as DSL. Select New Zealand from the Country selection
dropdown, then select your Internet Service Provider (ISP) from the list. Once you have selected
these two entries, you will notice the majority of the elds are completed for you. Lastly enter your
Username and Passwords that have been provided by your ISP. Click on Next when you have
entered your information.
If you wish to use Wireless on your router you will now be able to congure it below. It is
recommended to change the Wireless Network Name and also use WPA2-PSK for security.
Once you have made the required changes click on Next.

DSL-2750B
10
ENGLISH
3. Cont...
PPP over ATM (New Zealand)
Please review the details to ensure they are correct. Click on Apply to make the changes effective
immediately.
You should now have an active Internet Connection.

DSL-2750B 11
ENGLISH
4. SETUP BRIDGE MODE
BRIDGE MODE (Modem Only Mode)
Once you have successfully accessed the Web UI of the DSL-2750B you will need to go to the
following location to congure your Bridge Mode settings.
SETUP > WIZARD
Click on the Setup Wizard button to start the wizard, below we will go through the required settings
to setup a Bridge Mode connection.
Click on Next to start the Setup Wizard.
It is recommeded to setup a new password for your DSL-2750B. Please enter the current password
"admin" and then enter a new password below. Once you have entered your new passwords click on
Next.

DSL-2750B
12
ENGLISH
4. Cont...
BRIDGE MODE (Modem Only Mode)
It is not required to congure the Time Settings while in Bridge Mode, please click Next.
In this example we will be conguring the Internet connection as Bridge Mode. This is mostly used in
Australia. Ensure the WAN Services type is set as DSL. Select the Country Australia from the list,
then the Internet Service Provider (ISP) as Others. Then Change the Protocol to Bridge and enter
the VPI as 8and the VPI as 35. Once you have completed this click on Next.

DSL-2750B 13
ENGLISH
4. Cont...
BRIDGE MODE (Modem Only Mode)
Since we are not using the Routing features of the DSL-2750B the Wireless LAN feature is not
required for Bridge Mode. Please uncheck the Enable Your Wireless Network checkbox and click
on Next.

DSL-2750B
14
ENGLISH
4. Cont...
BRIDGE MODE (Modem Only Mode)
Please review the details to ensure they are correct. Click on Apply to make the changes effective
immediately.
Your DSL-2750B is now congured in Bridge Mode. You can now connect this device to your existing
Router and use PPPoE on the exisiting Router's WAN/Internet connection settings to connect to the
Internet.

DSL-2750B 15
ENGLISH
5. SETUP ETHERNET WAN MODE
ETHERNET WAN (NBN / UFB Customers)
Once you have successfully accessed the Web UI of the DSL-2750B you will need to go to the
following location to congure your Ethernet WAN settings.
SETUP > WIZARD
Click on the Setup Wizard button to start the wizard, below we will go through the required settings
to setup a Ethernet WAN connection.
Click on Next to start the Setup Wizard.
It is recommeded to setup a new password for your DSL-2750B. Please enter the current password
"admin" and then enter a new password below. Once you have entered your new passwords click on
Next.

DSL-2750B
16
ENGLISH
5. Cont...
ETHERNET WAN (NBN / UFB Customers)
It is recommended to congure the Time Settings to synchronise with the Internet Time Servers.
Please enable the check box and select your Time Zone, then click Next.
In this example we will be conguring the Internet connection for an Ethernet WAN which is the most
common for NBN / UFB customers.
Ensure the WAN Services type is set as ETH WAN. Select the required Protocol from the list. In
this example we will use Dynamic IP but your Internet Service Provider (ISP) may use a different
protocol. Please ensure you select the appropriate Protocol as instructed by the ISP then click Next.

DSL-2750B 17
ENGLISH
5. Cont...
ETHERNET WAN (NBN / UFB Customers)
If you wish to use Wireless on your router you will now be able to congure it below. It is
recommended to change the Wireless Network Name and also use WPA2-PSK for security.
Once you have made the required changes click on Next.

DSL-2750B
18
ENGLISH
Please review the details to ensure they are correct. Click on Apply to make the changes effective
immediately.
Connect the Ethernet cable that comes from the Network Termination Device (NTD) in your home
that was installed by the ISP to LAN Port 4 on the DSL-2750B.
You should now have an active Internet Connection.
5. Cont...
ETHERNET WAN (NBN / UFB Customers)

DSL-2750B 19
TROUBLESHOOTING
SET-UP AND CONFIGURATION PROBLEMS
1. HOW DO I CONFIGURE MY DSL-2750B ROUTER VIA A WEB BROWSER?
- Connect your PC to the router using an Ethernet cable.
- Open a web browser and enter the address http://192.168.1.1
- The default username is ‘admin’. The default password is 'admin'.
- If you have changed the password and can not remember it, you will need to reset the router to
set the password back to 'admin'. See below.
2. HOW DO I RESET MY DSL-2750B ROUTER TO FACTORY DEFAULT SETTINGS?
- Ensure the router is powered on.
- Press and hold the reset button on the rear of the device for 10 seconds. The reset process will
take up to 60 seconds to complete before you can access the DSL-2750B again.
Note: Resetting the router to factory default will erase the current conguration settings. To re-
congure your settings, log into the router as outlined in question 1, then run the Setup Wizard.
3. HOW DO I ADD A NEW WIRELESS CLIENT OR PC IF I HAVE FORGOTTEN MY
WIRELESS NETWORK NAME (SSID) OR WIRELESS ENCRYPTION KEY?
- Every PC that needs to connect to the router wirelessly, you will need to ensure you use the
correct Wireless Network Name (SSID) and encryption key.
- Access the router congration as detailed in question 1 to check or alter your wireless settings.
- Make sure you write down these settings so that you can enter them into each wirelessly
connected PC. You will nd a dedicated area on the back of this document to record this
important information for future use.
4. WHY CAN I NOT GET AN INTERNET CONNECTION?
- Please contact your ISP to make sure the service has been enabled/connected by your ISP and
that your ISP username and password is correct.

Ver. 1.00(AU) 2012/11/20
WIRELESS NETWORK REMINDER
Wireless Network Name (SSID)
Wireless Network Password
3-YEAR LIMITED WARRANTY
AUSTRALIA
Technical Support:
http://support.dlink.com.au
1300 766 868
NEW ZEALAND
Technical Support:
http://support.dlink.co.nz
0800 900 900