
ECAM23460
13
DESCALING
and “FILL TANK” alternate on the display.
10. The appliance is now ready for rinsing
through with clean water. Empty the container
used to collect the descaler solution. Extract the
water tank, empty, rinse under running water,
fill with fresh water up to the MAX level and put
back in the appliance: “Rinsing, Press OK” is
displayed.
11. Empty the container used to collect the descaler
solution and replace it empty under the hot
water spout.
12. Press button to start rinsing. Hot water flows
out of the spouts and the message “Rinsing
Please wait” is displayed.
13. When the water tank is completely empty,
the messages “RINSING”, “FILL TANK” and
“REPLACE FILTER” (if previously removed)
alternate on the display.
14.
Remove the water tank, replace the filter (if
previously removed), fill the tank up to the
MAX level with fresh water and insert it in the
appliance: the display will show “RINSING
Confirm?”.
15.
Place the container used to collect the rinsing
water empty under the hot water spout.
16.Press button to restart rinsing: hot water
flows out of the hot water spout only and the
message “RINSING Please wait” is displayed.
17.When it finishes, the message “Rinsing
complete, Confirm?” appears on the display.
18.Press the hot water button. The message
“FILL TANK” is displayed.
19.Empty the drip tray, remove and top up the
water tank with fresh water to the MAX level
and put back in the machine.
Descaling is complete.
Important! Danger of Burns
Hot water containing acid flows from the
spout. Avoid contact with splashes of water.
Descale the machine when the message
“DESCALE” flashes on the display.
1. Turn the appliance on and wait until it is ready
for use.
2. Press the Pbutton to enter the menu.
3. Turn the dial until “DESCALE” is
displayed.
4. Press
button.
“Descale Confirm?” is
displayed. Press
button
again to enable the
function.
5. “EMPTY DRIP TRAY” is displayed, alternating
with “REMOVE FILTER” (if the filter is present)
and “Add descaler Confirm?”.
6. Completely empty the water tank (A) and
remove the water filter (if present). Empty
the drip tray (B) and grounds container,
then put back in the appliance.
7.
Pour the descaler (C) into the tank up to the level
A(corresponding to a 100 ml pack) marked
on the side of the tank, then add water (D)
(1 litre) up to level Band put the water tank back.
8. Place an empty container with a minimum
capacity of 60,86 fl. oz / 1.8 litres under the
coffee spouts and hot water spout (E).
9. Press button and the message “Descale
Underway“ is displayed. The descaling
program starts and the descaler liquid
comes out of the water spout. The
descale program automatically performs
a series of rinses and pauses to remove
limescale deposits from inside the
machine.
B
ABCDE
After about 25 minutes, the messages “RINSING”