D'San IP-2000X User manual

DSan Corporation 142 Mineola Avenue, Roslyn Heights, NY 11577 [e-mail] 516 625-5608
NETWORK EXTENDER
IP-2000X IP-2000XPC
Network Extender is an IP address-configurable adapter that allows multi-point control
and display of countdown time from Limitimer®, speaker timer system or PerfectCue®
remote cueing system.
An adapter is configured for one or the other product. It cannot be used for both.
The server-configured adapter can serve client-configured adapters to drive signal
lights, slave timers or other cue lights across different networks.
Applications include video conferencing or meetings taking place across multiple
locations.
How to set up:
1. Obtain an IP address from your network administrator or select an unused IP
address within the range of a simple router (i.e. 192.168.1.85). Configure one Network
Extender with this information and set as server. Configuration is done with a
Windows software application (see http://www.dsan.com/Network) and a USB
connection to the PC. The Network Extender must be powered.
Connect Limitimer (or a signal light) or a cue light to the Network Extender using Cat-5
cable and the Network Extender to the network. Look carefully before connecting. The
Network jacks look like the signal light jacks.

DSan Corporation 142 Mineola Avenue, Roslyn Heights, NY 11577 [e-mail] 516 625-5608
2. Configure the client signal lights with the timer's server address and set to obtain an
IP address through DHCP. If the connection to the server is from outside of the local
area network, configure the gateway address as well. This is usually the address of the
router.
Up to 8 clients can connect to one server. But additional server-configured Network
Extenders can be daisy-chained to the first server, each additional server being able to
serve 8 clients.
Light Indicators:
Network side
Use USB to connect to PC conf
iguration application
Green = Connected to a network (router)
Yellow-blink steady* = Data flowing to/from
another Network Extender on network
Yellow-blink intermittent = trying to connect to
another Network Extender
*Using PerfectCue, Yellow on only when cue is
transmitted or received
Device Side
Do not connect to network!!
Green = Connected to another Network Extender
Green-Red blink* = Data flowing to/from another
Network Extender
*Using PerfectCue, Red on briefly when cue is
transmitted
or received