Daewoo DLP-32C2AMSB User manual

LCD TELEVISION
INSTRUCTION MANUAL
DLP-26C2AMSB
DLP-32C2AMSB

Caution
2
WARNING : TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK HAZARD, DO NOT EXPOSE
THIS APPLIANCE TO RAIN OR MOISTURE.
CAUTION : TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.
Disposal o Used Electrical & Electronic Equipment
The me ning of the symbol on the product, its ccessory or p ck ging indic tes th t this product
sh ll not be tre ted s household w ste. Ple se, dispose of this equipment t your pplic ble collec-
tion point for the recycling of electric l & electronic equipments w ste. In the Europe n Union nd
Other Europe n countries which there re sep r te collection systems for used electric l nd elec-
tronic product. By ensuring the correct dispos l of this product, you will help prevent potenti lly
h z rdous to the environment nd to hum n he lth, which could otherwise be c used by unsuit ble
w ste h ndling of this product. Therecycling of m teri ls will help conserve n tur l resources.
Ple se do not therefore dispose of your old electric l nd electronic equipment with your household
w ste. For more det iled inform tion bout recycling of this product, ple se cont ct your loc l city
office, your household w ste dispos l service or the shop where you purch sed the product.
Europe only
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
The lightning fl sh with rrowhe d symbol, within n equil ter l
tri ngle, is intended to lert the user to the presence of uninsul t-
ed “d ngerous volt ge” within the product’s enclosure th t m y
be of sufficient m gnitude to constitute risk electric shock.
The excl m tion point within n equil ter l tri ngle is intended to
lert the user to the presence of import nt oper ting nd servic-
ing instructions in the liter ture ccomp nying the ppli nce.

Important
Sa eguards
3
Ple se re d the following s fegu rds for your TV nd ret in for future reference.
Alw ys follow ll w rnings nd instructions m rked on the television.
1. Read, Retain and Follow All Instructions
Re d ll s fety nd oper ting instructions before oper ting the TV. Ret in them s fely
for future reference. Follow ll oper tions nd instructions ccordingly.
2. Heed Warnings
Adhere to ll w rnings on the ppli nce nd in the oper ting instructions.
3. Cleaning
Unplug the TV from the w ll outlet before cle ning. Do not use liquid, br sive, or erosol cle ners.
Cle ners c n perm nently d m ge the c binet nd screen. Use lightly d mpened cloth for
cle ning.
4. Attachments and Equipment
Never dd ny tt chment nd/or equipment without pprov l of the m nuf cturer s such dditions m y
result in the risk of fire, electric shock or other person l injury.
5. Water and Moisture
The pp r tus sh ll not be exposed to dripping or spl shing nd th t no objects filled with liquids,
such s v ses, sh ll be pl ced on the pp r tus.
6. Setting
Do not pl ce this TV on n unst ble c rt, st nd or t ble. Pl cing the TV on n unst ble b se c n
c use the TV to f ll, resulting in serious person l injuries s well s d m ge to the TV. Use only
c rt, st nd, br cket or t ble recommended by the m nuf cturer or s lesperson.
7. Ventilation
Slots nd openings in the c binet re provided for ventil tion nd to ensure reli ble oper tion of the TV nd to
protect it from overhe ting. Do not cover the ventil tions openings in the c binet nd never pl ce the set in confined
sp ce such s built-in c binet unless proper ventil tion is provided. Le ve minimum 10 cm g p ll round the unit.
8. Power Source
This TV should be oper ted only from the type of power source indic ted on the m rking l bel. If you re not
sure of the type of power supplied to your home, consult your ppli nce de ler or loc l power comp ny.
9. Grounding or Polarization
This TV is equipped with pol rized ltern ting current line plug ( plug h ving one bl de wider th n the other). This
plug will fit into the power outlet only one w y. This is s fety fe ture. If you re un ble to insert the plug fully into
the outlet, try reversing the plug. If the plug should still f il to fit, cont ct your electrici n to repl ce your obsolete
outlet. Do not defe t the s fety purpose of the pol rized plug. A w rning th t n pp r tus with CLASS I construction
sh ll be connected to MAINS socket outlet with protective e rthing connection.
10. Power-Cord Protection
Power-supply cords should be routed so th t they re not likely to be w lked on or pinched by items pl ced
upon or g inst them, p ying p rticul r ttention to cords t plugs, w ll outlets, nd the point
where they exit from the TV. MAINS plug is used s the disconnect device, the disconnect device sh ll rem in re dily oper ble.
11. Lightning
For dded protection for this TV during lightning storm, or when it is left un ttended nd unused for long
periods of time, unplug it from the w ll outlet nd disconnect the ntenn or c ble system. This will prevent
d m ge to the TV due to lightning nd power-line surges.
12. Wall or Ceiling Mounting
When mounting the product on w ll or ceiling, be sure to inst ll the product using the design ted
mounting tool ccording to the method recommended by the m nuf cturer.

Important
Sa eguards
4
13. Power Lines
An outside ntenn system should not be loc ted in the vicinity of overhe d power lines or other electric light
or power circuits, or where it c n f ll into such power lines or circuits. When inst lling n outside ntenn
system, extreme c re should be t ken to keep from touching such power lines or circuits s cont ct with
them might be f t l.
14. Overloading
Do not overlo d w ll outlets nd extension cords s this c n result in risk of fire or electric shock.
15. Object and Liquid Entry
Never push objects of ny kind into this TV through openings s they m y touch d ngerous volt ge points or
short-out p rts th t could result in fire or electric shock. Never spill liquid of ny kind on or into the TV.
16. Outdoor Antenna Grounding
If n outside ntenn or c ble system is connected to the TV, be
sure the ntenn or c ble system is grounded so s to provide
some protection g inst volt ge surges nd built-up st tic ch rges.
Section 810 of the N tion l Electric Code, ANSI /NFPA No. 70-1984,
provides inform tion with respect to proper grounding of the m st
nd supporting structure, grounding of the le d in wire to n ntenn
disch rge unit, size of grounding conductors, loc tion of
ntenn disch rge unit, connection to grounding electrodes, nd
requirements for the grounding electrode.
17. Servicing
Do not ttempt to service this TV yourself s opening or removing covers m y expose you to d ngerous
volt ge or other h z rds. Refer ll servicing to qu lified service personnel.
18. Damage Requiring Service
Unplug the TV from the w ll outlet nd refer servicing to qu lified service personnel under the following
conditions:
( ) When the power-supply cord or plug is d m ged.
(b) If liquid h s been spilled, or objects h ve f llen into the TV.
(c) If the TV h s been exposed to r in or w ter.
(d) If the TV does not oper te norm lly by following the oper ting instructions. Adjust only those controls
th t re covered by the oper ting instructions s n improper djustment of other controls m y result in
d m ge nd will often require extensive work by qu lified technici n to restore the TV to its norm l oper tion.
(e) If the TV h s been dropped or the c binet h s been d m ged.
(f) When the TV exhibits distinct ch nge in perform nce - this indic tes need for service.
19. Replacement Parts
When repl cement p rts re required, be sure the service technici n h s used repl cement p rts specified
by the m nuf cturer or h ve the s me ch r cteristics s the origin l p rt. Un uthorized substitutions m y
result in fire, electric shock or other h z rds.
20. Sa ety Check
Upon completion of ny service or rep ir to the TV, sk the service technici n to perform s fety checks to
determine th t the TV is in s fe oper ting condition.
21. Heat
The product should be situ ted w y from he t sources such s r di tors, he t registers, stoves, or
other products (including mplifiers) th t produce he t.
ANTENNA
LEAD IN WIRE
ANTENNA
DISCHARGE UNIT
(NEC SECTION 810-20)
GROUNDING
CONDUCTORS
(NEC SECTION 810-21)
GROUND CLAMPS
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PART H)
GROUND CLAMP
ELECTRIC
SERVICE
EQUIPMENT
NEC — NATIONAL ELECTRICAL CODE
EXAMPLE OF ANTENNA GROUNDING

Warning
5
This section must be read care ully and ollowed by the user prior to the operation o the product.
The m nu l st tes import nt instructions for the user's own s fety, nd the proper oper tion of the product.
In case of an accident, please unplug the unit from the outlet immediately.
Hold the plug when unplugging the unit
from the outlet. The cord may cause fire or
electric shock if damaged.
Do not cause the product to lean or put it in an
unstable place since it may cause a serious
injury to a person, as well as damage to the
product if it falls.
Do not put any object that contains water -
such as flowerpot - the unit.
The water may penetrate into the unit, and be
a cause of fire or hazardous electric shock.
To reduce the risk of electric shock, do not
remove cover or back. No user -serviceable
parts inside. Refer to qualified service
personnel for repair.
Do not put on or use the product near water and
moisture-such as in a bathroom, washbowl, etc.
It may be a cause of fire and electric shock
hazards.
To prevent fire and damages to the product,
unplug the unit from the outlet during lightning
storm, or when it is left unattended and unused
for a long period of time.
Do not let children hang on or climb on the
product since it may be a cause of serious
injury.
Slots and openings in the case are provided for
ventilation to ensure reliable operation of the
product. Never put in any item-such as a coin,
paper, match- through these openings since it
may touch dangerous voltage points that could
result in fire or shock hazard.

Warning
6
Do not put volatile substance-such as
benzene, naphtha- near the product since it
may cause a change in the product's colour.
Do not view the TV too closely since it may
cause damage in your eyesight.
Refer servicing to qualified service
personnel for cleaning at least once a year
since dust inside the TV set may be a result
or fire and malfunctioning of the product.
The product should be situated away from
any heat source-such as radiators, heat
registers, stoves, or other products that
produce heat.
Do not put on any heavy item on the power
cord since it may result in fire or hazardous
electric shock if the cord is damaged.
Do not cover the top of the television set.
Ventilation will be prevented, and it may be
a cause of fire if the product is internally
overheated.
Unplug the power from the outlet and all the related
connections from the unit to prevent electric shock. At least
two people must work together to move the TV set when
transporting to prevent the TV from falling, and
consequently, any serious injury or damage.
Do not touch the power cord with
moisturized or wet hands when plugging to
or unplugging from the outlet since it may be
a cause of electric shock.
Please be advised of electric wires and cables when installing
the antenna. It may be a cause of hazardous electric shock and
fire if the antenna touches or falls on the electric wire; thus, it
must be installed firmly, and far away from the cables.
Do not spill water or drop the remote
controller since it may be a cause of
malfunctioning.
This section must be read care ully and ollowed by the user prior to the operation o the product.
The m nu l st tes import nt instructions for the user's own s fety, nd the proper oper tion of the product.
Ple se keep the user's m nu l in s fe pl ce for future reference.
Do not expose the product to a dusty or
moisturized place since it may be a cause of
malfunctioning.

Table o
Contents
7
Installation and Maintenance
Antenn Connection 9
Video Connection 12
C mcorder & Video G me Connection 13
DVD Pl yer Connection 14
STB Connection 15
PC Connection 16
C ble TV Bro dc sting Connection 18
Connect with the Dolby Digit l AMP 19
N me of E ch P rt 20
Basic Guide
P rts of the Remote Controller 22
Method To Use B sic Menu 24
To W tch TV 25
Setting Up TV St tions 27
Selection of AV nd Multimedi Input Sign l 31
Application Guide
Screen Adjustment 33
POP Mode 37
Sound Adjustment 38
Selection of L ngu ge 41
Adjustment of Time 42
Other Functions 44
Teletext 45
Troubleshooting 46
St nd rd of Product 48

Supplied
Accessories
8
AC cord
AC cord Instruction m nu l
B tteries
MUTE
PICTURE
P.M O D E
MTS STILL
DYNAMIC BASS 3D PANORAMA P.PR
P.P R
LOCK SLEEP
P.STILL P.SWAP P.INPUT
ASPECT
SOUND
POWER
RECALL
PREV PR OK
MULTIMEDIA
MENU
V
O
L
V
O
L
PR
PR
123
456
789
0
R-54D04
X
?
Remote controller
Make sure that the ollowing accessories are provided with the product.

Antenna
Connection
9
Indoor Antenna Connection
1. Connect the feeder c ble of the ntenn to the combining d pter.
WHEN THE IMAGE IS NOT CLEAR : Uncle r screen im ge nd b d reception m y be c use of wrong
ntenn connection. Be sure to check its direction nd pl ce when
inst lling.
2. Connect the combining d pter to the ntenn input t the left side of the TV set.
WHEN USING THE COMBINING ADAPTER : You m y obt in the combining d pter t your closest
Service Center.
HDMI INPUT AV1 AV2
PC INPUT AUDIO
S-VHS
AV3 L - AUDIO - R
OPTICAL UP-GRADE PCRT
COMPONENT
Pr
RL
Pb Y
Antenn Input
BACK OF THE TV SET

Antenna
Connection
10
Antenn socket t the left side of the TV set
ANT/CABLE
ANT/CABLE
CTV Antenna Connection
Such community TV Antenn inst ll tion m y be found in most of co-op p rtments.
When a coaxial cable is used : Plug the co xi l c ble to the ntenn socket, nd fix it firmly by turning it to
the right.
When a eeder cable is used : Plug the co xi l c ble to the ntenn socket, nd fix it firmly by turning it to
the right.
Antenn socket t the left side of the TV set