Daewoo FR-330 User manual

Service Manual
Refrigerator
Model: FR-330
DAEWOO ELECTRONICS CO., LTD.
S/M No. : FR33000012
✔ Caution
: In this Manual, some parts can be changed for improving, their
performance without notice in the parts list. So, if you need the
latest parts information,please refer to PPL(Parts Price List) in
Service Information Center (http://svc.dwe.co.kr).

CONTENTS
1. SPECIFICATION 1
2. NAME OF PARTS 2
3. REFRIGERANT CYCLE DIAGRAM 3
4. WRING DIAGRAM 4
5. MACHINE ROOM VIEW AND PART LIST 5
6. METHODS OF EXCHANGING MAIN PARTS 6
7. EXPLODE VIEW AND PARTS LIST 10
8. PARTS LIST 11

1.Specification
Refrigerant R134a
COOLING System
Refrigeration System
Defrost System
Defrost Operation
Cold Control
Freezer
Refrigerator
Total
Height
Width
Depth
Net Weight
-1-
207L
268L
115g
Fan Cooling Convection Type
Air Forced Convection
Forced Fin-Evaporator Type
57Kg
External
Dimension
1636mm
600mm
687mm
Automatic Start & Stop
Adjustable Dial
Capacity
61L

2. NAME OF PARTS
-2-

3. REFRIGERANT CYCLE DIAGRAM
-3-

4. WRING DIAGRAM
-4-

NO PART NAME NO PART NAME NO PART NAME
1 BASE CAB AS 7 PIPE HOT 13 BASE COMP AS
2 COMPRESSOR 8 DRYER AS 14 BRACKET EARTH
3 P-RELAY AS 9 PIPE SUC AS 15 POWER CORD AS
4 PIPE VAPORI AS 10 PIPE SUC CONN 16 ABSORBER PIPE A
5 ABSORBER PIPE B 11 BOX POWER AS
6 PIPE S *PLT 12 HARNESS EARTH
5. MACHINE ROOM VIEW AND PART LIST
-5-

(1) Freezing room louver
1) Unscrew, remove the F-louver by
pulling forward with inserting
screwdriver into the hole of F louver.
2) Assemble it by pressing triangle
shape ( ) by hand.
(2) R control box
1) After pressing both bottom surfaces
of shade and pull forward.
2) To exchange the interior lamp,
unscrew the lamp counterclockwise.
3) Remove two screws
6. METHODS OF EXCHANGING MAIN PARTS
-6-

Methode of exchanging main parts
4) Pull slightly forward with instant force.
5) Remove the housing
6) After romoving the control switch knob
and two screws for fixing control switch,
change the control switch to new one.
-7-

Methode of exchanging main parts
(3) Bimetal
1) Cut off the wire bind.
2) Take out the bimetal.
(4) Glass tube heater
1) Remove 2 screws that fasten the evaporator.
2) Slightly pull the evaporator to the arrow's
direction.
3) Move the entire eveporator upward the pipe
center to the arrow's direction.
(Do not crumble the part A of the
accumulator during the process.)
-8-
Evaporator fastening screw
BIMETAL