Daewoo FR-370S User manual

Service Manual
S/M No. :FR33000010
Oct. 2001
DAEWOO ELECTRONICS CO., LTD.
http : //svc.dwe.co.kr
MODEL :
need
Refrigerator
FR-370S (FRM-272LNE9C)
✔ Caution
: In this Manual, some parts can be changed for improving, their
performance without notice in the parts list. So, if you need the
latest parts information,please refer to PPL(Parts Price List) in
Service Information Center (http://svc.dwe.co.kr).
FR-331 (FRM-273NLE8C)
(For Malaysia DWE SAL-MALAYS)
(For Singapore AIMS)

1. SPECIFICATION
Refirgerant R134a
COOLING System
Refrigeration System
Defrost System
Defrost Operation
Cold Control
Freezer
Refrigerator
Total
Height
Width
Depth
Net Weight
1) MALAYSIA DWE SAL-MALAYS (FR-370S)
687mm
115g
268L
Automatic Start & Stop
Adjustable Dial
57Kg
Capacity
Fan Cooling Convection Type
Air Forced Convection
Forced Fin-Evaporator Type
61L
207L
1636mm
600mm
Externel
Dimension

Specification
Refirgerant R134a
COOLING System
Refrigeration System
Defrost System
Defrost Operation
Cold Control
Freezer
Refrigerator
Total
Height
Width
Depth
Net Weight
207L
268L
115g
Fan Cooling Convection Type
Air Forced Convection
Forced Fin-Evaporator Type
57Kg
2) SINGAPORE AIMS (FR-331)
1636mm
600mm
682mm
Automatic Start & Stop
Adjustable Dial
Capacity
61L
Externel
Dimension

2. NAME OF PARTS
1) MALAYSIA DWE SAL-MALAYS(FR-370S)

Name of parts
2) SINGAPORE AIMS (FR-331)

3. REFRIGERANT CYCLE DIAGRAM

NO PART NAME NO PART NAME NO PART NAME
1 BASE CAB AS 7 PIPE HOT 13 BASE COMP AS
2 COMPRESSOR 8 DRYER AS 14 BRACKET EARTH
3 P-RELAY AS 9 PIPE SUC AS 15 POWER CORD AS
4 PIPE VAPORI AS 10 PIPE SUC CONN 16 ABSORBER PIPE A
5 ABSORBER PIPE B 11 BOX POWER AS
6 PIPE *S PLT 12 HARNESS EARTH
4. MACHINE ROOM VIEW AND PART LIST
1) SIDE PLATE PIPE TYPE

(1) Freezing room louver
1) Unscrew, remove the F-louver by
pulling forward with inserting
screwdriver into the hole of F louver.
2) Assemble it by pressing triangle
shape (▲) by hand.
(2) R control box
1) After pressing both bottom surfaces
of shade and pull forward.
2) To exchange the interior lamp,
unscrew the lamp counterclockwise.
3) Remove two screws
5. METHODS OF EXCHANGING MAIN PARTS

Methode of exchanging main parts
4) Pull slightly forward with instant force.
5) Remove the housing
6) After romoving the control switch knob
and two screws for fixing control switch,
change the control switch to new one.