Dafur Diana 1000 User manual

Instruction Manual
5 Port Gigabit Ethernet Switch
DIANA 1000

2 Version 1.0
Table of content
1. Introduction .................................................................3
1.1 Support ....................................................................4
1.2 General ....................................................................4
1.3 Performance characteristics ....................................................4
1.4 Interfaces ..................................................................4
1.5 Technical specification ........................................................5
1.6 Deliverables ................................................................5
2.1 Operation and diagnostics LED´s ................................................6
2.1.1 Front panel................................................................6
2.1.2 Rear panel ................................................................6
2.2 LED´s .....................................................................6
2. Hardware ...................................................................6
3. Technical Data ...............................................................7
Manual DIANA 1000
Table of content

Please read the safety instructions at the end of this document before assembling the equipment
and taking it into operation!
DAFÜR GmbH points out that the material and information in this documentation may be subject to
technical changes without prior notice. In particular, the ongoing further development of the
products could result in changes that are not covered by this handbook. DAFÜR GmbH assumes
no liability whatsoever for printing errors or other inaccuracies in this handbook.
In particular, DAFÜR GmbH advises users that this handbook only contains a general description
of technical procedures and instructions which, if implemented in the described form, may not
necessarily be beneficial in every conceivable situation. Consequently, DAFÜR GmbH should
always be contacted if in doubt.
The replication of this document in part or in whole and its translation into other languages are
expressly forbidden without the prior written consent of DAFÜR GmbH.
Version 1.0 3
1. Introduction
Manual DIANA 1000

1. Introduction
1.1 Support
1.2 General
1.3 Performance characteristics
1.4 Interfaces
DAFÜR GmbH
Zur Eisernen Hand 27
64367 Mühltal
Phone.: 0 61 51 / 9514-0
Fax: 0 61 51 / 144 260
Mail: [e-mail]
WWW: http://www.dafuer.com
For questions regarding the use, installation and/or configuration of one of our products, please do
not hesitate to contact us.
Please be prepared to advise the following informations:
• name of product, serial number
• date of purchase
• configuration
With it´s 4 1000 Base-T ethernet and it´s mini-GBIC port, the 5 port gigabit ethernet switch DIANA
1000 offers an easy to install upgrade and will greatly improve network response times as well as
significantly speed up your traffic between your subnets.
Gigabit ethernet is an extesnion of IEEE 802.3 ethernet and provides a tenfold increase in
theoretical throughput over 100 Mbps and a hundredfold over 10 Mbps ethernet.
Since gigabit ethernet is compatible with all 10 and 100 Mbps ethernet environments, gigabit
ethernet provides a straightforward upgrade without wasting a company´s existing investment in
hardware, software and trained personnel.
• Auto-Negotiation for 10/100/1000 Mbps and duplex modus
• Auto-MDIX for all 4 RJ 45 ports
• support half-/fullduplex for 10 and 100 Mbps, fullduplex for 1000 mbps
• 802.3x Flow Control for fullduplex, Back Pressure Flow Control for halfduplex
• store-and-foreward
• 4K MAC adresses, 1 MBit RAM for data buffering
• extensive front panel diagnostics LED´s
Ethernet 4 x RJ 45 for 10/100/1000 Mbps
FO 1 x mini GBIC
4 Version 1.0
1. Introduction
Manual DIANA 1000

1.5 Technical specification
1.6 Deliverables
DC inputs external power supply, 7,5V DC
Power consumption < 1500 mA
Operatiing environments Temperature 5 to 40°C
Humidity10 to 90%, non-condensing
Storage environments Temperature 0 to 60°C
Humidity 5 to 95%, non-condensing
1 5 Port Gigabit Ethernet Switch DIANA 1000
1 external power supply
1 Manual
4 rubber feet with self adhesive backing
Version 1.0 5
1. Introduction
Manual DIANA 1000

2. Hardware
2.1 Operation and diagnostics LED´s
2.2 LED´s
2.1.1 Front panel
2.1.2 Rear panel
Status- and Operatingelements
Ethernet interface
Comprehensive LED indicators display the condition of the switch and status of the
network.
The rear panel of the switch consists of 4 1000 Base-T ports and 1 mini-GBIC port,
aswell as one DC power connector.
Port 1 mini GBIC Status LED´s
6 Version 1.0
2. Hardware
5-Port Gigabit Ethernet Switch DIANA 1000 www.dafuer.com
POWER
2345
Link/ACT
1000Mbps
100Mbps
1
mini-GBIC
5432 1
10/100/1000 Base T Ports mini GBIC DC Stromanschluss
Power LED
On the switch is correctly connected to the power supply
the power cord has an improper connection
Off
1000 Mbps
LINK/ACT
On
On
indicates, that the respective port is connected a 1000 Mbps
gigabit ethernet
indicates, that a mini-GBIC moduile is installed and connected to
a network
the respective port is disconnected from the network
no link
indicates, that the mini-GBIC module is receiving data
Off
Off
Blinking
Manual DIANA 1000

Port2-510/100/1000 Mbps Ethernet Status LED´s
3. Technical data
Version 1.0 7
2. Hardware
Manual DIANA 1000
1000 Mbps
100 Mbps
LINK/ACT
On
On
On
indicates, that the respective port is connected to a 1000 Mbps
network
indicates, that the respective port is connected to a 100 Mbps
network
the respective port is connected to a 10/100/1000 Mbps network
indicates, that the respecitve port is connected to a 10/100 Mbps
network
the respective port is connected to a 10 Mbps or 1000 Mbps
network
no link
indicates, that the respective is receiving or transferring date
from or to the network
Off
Off
Off
Blinking
General
Standards IEEE 802.3ab, 802.3u, 802.3, 802.3z, 802.3x
CSMA/CD
Ethernet: 10 Mbps (halfduplex), 20 Mbps (fullduplex)
Fast Ethernet: 100 Mbps (halfduplex), 200 Mbps (fullduplex)
Gigabit Ethernet: 2000 Mbps (fullduplex)
10 Base T: 2-Paar UTP Cat. 3, 4, 5; up to 100 m
100 Base TX: 2-Paar UTP Cat. 5; up toi 100 m
1000 Base T: 4-Paar UTP Cat. 5; up to 100 m
1000 Base SX: 62.5/125µ Multimode-FO-cable
50/1425µ Multimode-FO-cable
1000 Base LX: 10/125µ Singlemode-FO-cable
1 x mini GBIC Port
4 x 10/100/1000 Mbps Auto-MDIX UTP Ports
1 x DC power connection
Protocol
Data transfer rate
Networc cables
Number of ports
Environment
Power supply 7,5V, 1,5A
7,6 Watt
0° - 40°C, Humidity 5-95%, non-condensing
storage at max -10° - 70°C
171 x 98 x 29 mm (WHD)
Power consumption
Environment
conditions
Dimensions

DAFÜR GmbH Zur Eisernen Hand 27 64367 Mühltal bei Darmstadt (Hessen)
Tel.: [phone] / 9514-0 Fax: [phone] / 14 42 60 e-Mail: [e-mail]
Subject to technical changes
Release:10.März 2005
Instruction Manual DIANA 1000