Dahua Technology IPC-HDW5842T-ZE User manual

Network Camera Web 3.0
Operation Manual
ZHEJIANG DAHUA VISION TECHNOLOGY CO., LTD. V2.1.5

Operation Manual
I
Foreword
General
This manual introduces the functions, configuration, general operation, and system maintenance of
network camera.
Safety Instructions
The following signal words might appear in the manual.
Signal Words Meaning
Indicates a medium or low potential hazard which, if not avoided,
could result in slight or moderate injury.
Indicates a potential risk which, if not avoided, may result in property
damage, data loss, lower performance, or unpredictable result.
Provides methods to help you solve a problem or save you time.
Provides additional information as a supplement to the text.
Revision History
Version Revision Content Release Time
V2.1.5 Updated the information of backlight. October 2022
V2.1.4 Updated the information of alarm audio. June 2022
V2.1.3 Updated the description of encode bar. November 2021
V2.1.2
●Updated "4.2.4.1 Adjustment".
●Updated "4.5.1.1.1 Interface Layout".
●Updated "4.5.1.1.2 Picture".
●Updated "4.5.1.1.11 Image Correction".
●Updated "4.5.1.4 Splicing".
●Updated "4.5.2.1 Video".
●Updated "4.8.2 Date & Time".
September 2021
V2.1.1
●Updated "4.8.3.2 Adding User Group".
●Updated "5.18 Setting Relay-in". July 2021
V2.1.0 Updated "5.7 Setting Smart Plan" July 2021
V2.0.9 Updated "4.5.2.1 Video". May 2021
V2.0.8
●Updated "4.5.2.3.1 Configuring Privacy Masking".
●Updated "4.7.3.3 FTP".
●Updated "4.8.3.1 Adding a User" and "4.8.3.3 ONVIF User".
●Updated "5.4.2 Setting Video Tampering".
●Updated "5.11 Setting Face Detection".
●Updated "5.15 Setting Stereo Analysis".
●Updated "5.19.5 Setting Security Exception".
December 2020

Operation Manual
II
Version Revision Content Release Time
V2.0.7
●Modify "5.1.1.7 Warning Light Linkage".
●Add "4.6.12 5G".
●Modify "4.7.3.2 Local".
July 2020
V2.0.6
●Added "4.5.2.3.11 Configuring GPS Position".
●Updated "5.2 Setting Smart Track". July 2020
V2.0.5
●Updated "4.5.1.1.8 Illuminator".
●Updated "4.7.3.2 Local".
●Added "5.19.6 Setting Disarming".
June 2020
V2.0.4
●Updated "4.5.1.4 Splicing".
●Updated "5.14 Setting Vehicle Density".
●Updated "5.12 Setting People Counting".
May 2020
V2.0.3 Added note in "4.7.3.2 Local". May 2020
V2.0.2
●Modified the contents of "5.16 Setting ANPR".
●Added modeling in "5.11 Setting Face Detection". December 2019
V2.0.1 Added "5.5 Setting Smart Motion Detection". August 2019
V2.0.0
●Consolidated the outline, and added baseline and safety
contents, and some intelligent functions such as face
recognition and ANPR.
●Deleted some old function such as stereo vision.
July 2019
V1.0.4
●Updated the chapters of "5.12 Setting People Counting"
and "5.13.1 Heat Map".
●Add VR mode of Fisheye device.
●Add video metadata function.
March 2019
V1.0.3 Added Stereo Analysis function. November 2018
V1.0.2
●Added chapters of "3 Device Initialization". and "Stereo
vision."
●Updated the chapters of "4.8.3 Account", and "4.6.7 SNMP".
October 2017
V1.0.1 First release. September 2016
Privacy Protection Notice
As the device user or data controller, you might collect the personal data of others such as their face,
fingerprints, and license plate number. You need to be in compliance with your local privacy
protection laws and regulations to protect the legitimate rights and interests of other people by
implementing measures which include but are not limited: Providing clear and visible identification
to inform people of the existence of the surveillance area and provide required contact information.
About the Manual
●The manual is for reference only. Slight differences might be found between the manual and the
product.
●We are not liable for losses incurred due to operating the product in ways that are not in
compliance with the manual.

Operation Manual
III
●The manual will be updated according to the latest laws and regulations of related jurisdictions.
For detailed information, see the paper user’s manual, use our CD-ROM, scan the QR code or visit
our official website. The manual is for reference only. Slight differences might be found between
the electronic version and the paper version.
●All designs and software are subject to change without prior written notice. Product updates
might result in some differences appearing between the actual product and the manual. Please
contact customer service for the latest program and supplementary documentation.
●There might be errors in the print or deviations in the description of the functions, operations
and technical data. If there is any doubt or dispute, we reserve the right of final explanation.
●Upgrade the reader software or try other mainstream reader software if the manual (in PDF
format) cannot be opened.
●All trademarks, registered trademarks and company names in the manual are properties of their
respective owners.
●Please visit our website, contact the supplier or customer service if any problems occur while
using the device.
●If there is any uncertainty or controversy, we reserve the right of final explanation.

Operation Manual
IV
Important Safeguards and Warnings
This section introduces content covering the proper handling of the device, hazard prevention, and
prevention of property damage. Read carefully before using the device, comply with the guidelines
when using it.
Transportation Requirements
●Transport the device under allowed humidity and temperature conditions.
●Pack the device with packaging provided by its manufacturer or packaging of the same quality
before transporting it.
●Do not place heavy stress on the device, violently vibrate or immerse it in liquid during
transportation.
Storage Requirements
●Store the device under allowed humidity and temperature conditions.
●Do not place the device in a humid, dusty, extremely hot or cold site that has strong
electromagnetic radiation or unstable illumination.
●Do not place heavy stress on the device, violently vibrate or immerse it in liquid during storage.
Installation Requirements
●Strictly comply with the local electrical safety code and standards, and check whether the power
supply is correct before operating the device.
●Please follow the electrical requirements to power the device.
◇When selecting the power adapter, the power supply must conform to the requirements of
ES1 in IEC 62368-1 standard and be no higher than PS2. Please note that the power supply
requirements are subject to the device label.
◇We recommend using the power adapter provided with the device.
●Do not connect the device to two or more kinds of power supplies, unless otherwise specified, to
avoid damage to the device.
●The device must be installed in a location that only professionals can access, to avoid the risk of
non-professionals becoming injured from accessing the area while the device is working.
Professionals must have full knowledge of the safeguards and warnings of using the device.
●Do not place heavy stress on the device, violently vibrate or immerse it in liquid during
installation.
●An emergency disconnect device must be installed during installation and wiring at a readily
accessible location for emergency power cut-off.
●We recommend you use the device with a lightning protection device for stronger protection

Operation Manual
V
against lightning. For outdoor scenarios, strictly comply with the lightning protection
regulations.
●Ground the function earthing portion of the device to improve its reliability (certain models
are not equipped with earthing holes). The device is a class I electrical appliance. Make sure that
the power supply of the device is connected to a power socket with protective earthing.
●The dome cover is an optical component. Do not directly touch or wipe the surface of the cover
during installation.
Operation Requirements
●The cover must not be opened while the device is powered on.
●Do not touch the heat dissipation component of the device to avoid the risk of getting burnt.
●Use the device under allowed humidity and temperature conditions.
●Do not aim the device at strong light sources (such as lamplight, and sunlight) when focusing it,
to avoid reducing the lifespan of the CMOS sensor, and causing overbrightness and flickering.
●When using a laser beam device, avoid exposing the device surface to laser beam radiation.
●Prevent liquid from flowing into the device to avoid damage to its internal components.
●Protect indoor devices from rain and dampness to avoid electric shocks and fires breaking out.
●Do not block the ventilation opening near the device to avoid heat accumulation.
●Protect the line cord and wires from being walked on or squeezed particularly at plugs, power
sockets, and the point where they exit from the device.
●Do not directly touch the photosensitive CMOS. Use an air blower to clean the dust or dirt on the
lens.
●The dome cover is an optical component. Do not directly touch or wipe the surface of the cover
when using it.
●There might be a risk of electrostatic discharge on the dome cover. Power off the device when
installing the cover after the camera finishes adjustment. Do not directly touch the cover and
make sure the cover is not exposed to other equipment or human bodies
●Strengthen the protection of the network, device data and personal information. All necessary
safety measures to ensure the network security of the device must be taken, such as using strong
passwords, regularly changing your password, updating firmware to the latest version, and
isolating computer networks. For the IPC firmware of some previous versions, the ONVIF
password will not be automatically synchronized after the main password of the system has been
changed. You need to update the firmware or change the password manually.
Maintenance Requirements
●Strictly follow the instructions to disassemble the device. Non-professionals dismantling the
device can result in it leaking water or producing poor quality images. For a device that is
required to be disassembled before use, make sure the seal ring is flat and in the seal groove
when putting the cover back on. When you find condensed water forming on the lens or the
desiccant becomes green after you disassembled the device, contact after-sales service to
replace the desiccant. Desiccants might not be provided depending on the actual model.

Operation Manual
VI
●Use the accessories suggested by the manufacturer. Installation and maintenance must be
performed by qualified professionals.
●Do not directly touch the photosensitive CMOS. Use an air blower to clean the dust or dirt on the
lens. When it is necessary to clean the device, slightly wet a soft cloth with alcohol, and gently
wipe away the dirt.
●Clean the device body with a soft dry cloth. If there are any stubborn stains, clean them away
with a soft cloth dipped in a neutral detergent, and then wipe the surface dry. Do not use volatile
solvents such as ethyl alcohol, benzene, diluent, or abrasive detergents on the device to avoid
damaging the coating and degrading the performance of the device.
●The dome cover is an optical component. When it is contaminated with dust, grease, or
fingerprints, use degreasing cotton moistened with a little ether or a clean soft cloth dipped in
water to gently wipe it clean. An air gun is useful for blowing dust away.
●It is normal for a camera made of stainless steel to develop rust on its surface after being used in
a strong corrosive environment (such as the seaside, and chemical plants). Use an abrasive soft
cloth moistened with a little acid solution (vinegar is recommended) to gently wipe it away.
Afterwards, wipe it dry.

Operation Manual
VII
Table of Contents
Foreword ........................................................................................................................................................................................................I
Important Safeguards and Warnings............................................................................................................................................IV
1 Overview................................................................................................................................................................................................... 1
1.1 Introduction ................................................................................................................................................................................. 1
1.2 Network Connection ................................................................................................................................................................ 1
1.3 Function.......................................................................................................................................................................................... 1
1.3.1 Basic Function .................................................................................................................................................................. 1
1.3.2 Intelligent Function....................................................................................................................................................... 2
2 Configuration Flow.............................................................................................................................................................................. 5
3 Device Initialization ............................................................................................................................................................................ 6
4 Basic Configuration............................................................................................................................................................................. 9
4.1 Login ................................................................................................................................................................................................ 9
4.2 Live..................................................................................................................................................................................................10
4.2.1 Live Interface ..................................................................................................................................................................10
4.2.2 Encode Bar........................................................................................................................................................................11
4.2.3 Live View Function Bar...............................................................................................................................................11
4.2.4 Window Adjustment Bar...........................................................................................................................................14
4.2.4.1 Adjustment...........................................................................................................................................................14
4.2.4.2 Zoom and Focus..................................................................................................................................................17
4.2.4.3 Fisheye ....................................................................................................................................................................18
4.3 PTZ Operation ...........................................................................................................................................................................22
4.3.1 Configuring External PTZ Protocol......................................................................................................................22
4.3.2 Configuring PTZ Function ........................................................................................................................................22
4.3.2.1 Preset .......................................................................................................................................................................22
4.3.2.2 Tour...........................................................................................................................................................................23
4.3.2.3 Scan...........................................................................................................................................................................24
4.3.2.4 Pattern.....................................................................................................................................................................25
4.3.2.5 Pan.............................................................................................................................................................................26
4.3.2.6 PTZ Speed..............................................................................................................................................................27
4.3.2.7 Idle Motion ............................................................................................................................................................27
4.3.2.8 PowerUp.................................................................................................................................................................28
4.3.2.9 PTZ Limit.................................................................................................................................................................29
4.3.2.10 Time Task.............................................................................................................................................................29
4.3.2.11 PTZ Restart .........................................................................................................................................................30
4.3.2.12 Default..................................................................................................................................................................31

Operation Manual
VIII
4.3.3 Calling PTZ .......................................................................................................................................................................32
4.3.3.1 PTZ Control ...........................................................................................................................................................32
4.3.3.2 PTZ Function ........................................................................................................................................................34
4.4 Playback.......................................................................................................................................................................................34
4.4.1 Playback Interface........................................................................................................................................................35
4.4.2 Playing back Video or Picture.................................................................................................................................37
4.4.3 Clipping Video................................................................................................................................................................39
4.4.4 Downloading Video or Picture...............................................................................................................................40
4.4.4.1 Downloading a Single File.............................................................................................................................40
4.4.4.2 Downloading Files in Batches......................................................................................................................40
4.5 Camera ..........................................................................................................................................................................................41
4.5.1 Camera Conditions.......................................................................................................................................................41
4.5.1.1 Conditions .............................................................................................................................................................41
4.5.1.1.1 Interface Layout.......................................................................................................................................41
4.5.1.1.2 Picture...........................................................................................................................................................42
4.5.1.1.3 Exposure......................................................................................................................................................44
4.5.1.1.4 Backlight......................................................................................................................................................46
4.5.1.1.5 WB...................................................................................................................................................................47
4.5.1.1.6 Day & Night................................................................................................................................................48
4.5.1.1.7 Zoom and Focus.......................................................................................................................................49
4.5.1.1.8 Illuminator..................................................................................................................................................50
4.5.1.1.9 Defog.............................................................................................................................................................51
4.5.1.1.10 Fisheye.......................................................................................................................................................52
4.5.1.1.11 Image Correction..................................................................................................................................53
4.5.1.1.12 Splicing Mode.........................................................................................................................................54
4.5.1.2 Profile Management.........................................................................................................................................54
4.5.1.3 Zoom and Focus..................................................................................................................................................55
4.5.1.4 Splicing ...................................................................................................................................................................55
4.5.2 Setting Video Parameters ........................................................................................................................................56
4.5.2.1 Video ........................................................................................................................................................................56
4.5.2.2 Snapshot ................................................................................................................................................................59
4.5.2.3 Overlay....................................................................................................................................................................60
4.5.2.3.1 Configuring Privacy Masking............................................................................................................60
4.5.2.3.2 Configuring Channel Title ..................................................................................................................63
4.5.2.3.3 Configuring Time Title..........................................................................................................................63
4.5.2.3.4 Configuring Text Overlay....................................................................................................................64
4.5.2.3.5 Configuring Font Attribute................................................................................................................65

Operation Manual
IX
4.5.2.3.6 Configuring Picture Overlay..............................................................................................................65
4.5.2.3.7 Configuring Custom Overlay ............................................................................................................66
4.5.2.3.8 Configuring OSD Info............................................................................................................................67
4.5.2.3.9 Configuring Counting...........................................................................................................................68
4.5.2.3.10 Configuring Structured Statistics ................................................................................................68
4.5.2.3.11 Configuring GPS Position.................................................................................................................69
4.5.2.3.12 Configuring Ranging ..........................................................................................................................69
4.5.2.3.13 Configuring ANPR................................................................................................................................70
4.5.2.3.14 Configuring Face Statistics..............................................................................................................71
4.5.2.4 ROI.............................................................................................................................................................................71
4.5.2.5 Path...........................................................................................................................................................................72
4.5.3 Audio...................................................................................................................................................................................73
4.5.3.1 Configuring Audio Parameter .....................................................................................................................73
4.5.3.2 Configuring Alarm Audio...............................................................................................................................74
4.6 Network........................................................................................................................................................................................75
4.6.1 TCP/IP..................................................................................................................................................................................75
4.6.2 Port.......................................................................................................................................................................................78
4.6.3 PPPoE..................................................................................................................................................................................79
4.6.4 DDNS...................................................................................................................................................................................80
4.6.5 SMTP (Email)....................................................................................................................................................................81
4.6.6 UPnP....................................................................................................................................................................................84
4.6.7 SNMP...................................................................................................................................................................................85
4.6.8 Bonjour ..............................................................................................................................................................................88
4.6.9 Multicast............................................................................................................................................................................88
4.6.10 802.1x...............................................................................................................................................................................89
4.6.11 QoS ....................................................................................................................................................................................90
4.6.12 5G.......................................................................................................................................................................................90
4.6.12.1 Dialing Setting..................................................................................................................................................90
4.6.12.2 Mobile Setting ..................................................................................................................................................92
4.6.13 Access Platform...........................................................................................................................................................92
4.6.13.1 P2P..........................................................................................................................................................................92
4.6.13.2 ONVIF ....................................................................................................................................................................93
4.6.13.3 RTMP......................................................................................................................................................................94
4.7 Storage..........................................................................................................................................................................................95
4.7.1 Setting Storage Plan ...................................................................................................................................................95
4.7.2 Setting Schedule ...........................................................................................................................................................95
4.7.3 Setting Destination......................................................................................................................................................96

Operation Manual
X
4.7.3.1 Path...........................................................................................................................................................................96
4.7.3.2 Local..........................................................................................................................................................................97
4.7.3.3 FTP.............................................................................................................................................................................98
4.7.3.4 NAS......................................................................................................................................................................... 100
4.8 System........................................................................................................................................................................................ 101
4.8.1 General............................................................................................................................................................................ 101
4.8.2 Date & Time................................................................................................................................................................... 102
4.8.3 Account........................................................................................................................................................................... 103
4.8.3.1 Adding a User.................................................................................................................................................... 103
4.8.3.2 Adding User Group ........................................................................................................................................ 108
4.8.3.3 ONVIF User ......................................................................................................................................................... 110
4.8.4 Safety............................................................................................................................................................................... 113
4.8.4.1 System Service ................................................................................................................................................. 113
4.8.4.2 HTTPS.................................................................................................................................................................... 114
4.8.4.3 Firewall................................................................................................................................................................. 118
4.8.5 Peripheral ...................................................................................................................................................................... 120
4.8.5.1 Serial Port Settings......................................................................................................................................... 120
4.8.5.2 External Light.................................................................................................................................................... 121
4.8.5.3 Wiper..................................................................................................................................................................... 122
5 Event ...................................................................................................................................................................................................... 124
5.1 Setting Alarm Linkage........................................................................................................................................................ 124
5.1.1 Alarm Linkage ............................................................................................................................................................. 124
5.1.1.1 Setting Period................................................................................................................................................... 125
5.1.1.2 Record Linkage ................................................................................................................................................ 125
5.1.1.2.1 Setting Record Plan............................................................................................................................. 126
5.1.1.2.2 Setting Record Control...................................................................................................................... 127
5.1.1.2.3 Setting Record Linkage..................................................................................................................... 127
5.1.1.3 Snapshot Linkage ........................................................................................................................................... 128
5.1.1.3.1 Setting Snapshot Plan ....................................................................................................................... 128
5.1.1.3.2 Setting Snapshot Linkage ............................................................................................................... 129
5.1.1.4 Relay-out Linkage........................................................................................................................................... 129
5.1.1.5 Email Linkage.................................................................................................................................................... 129
5.1.1.6 PTZ Linkage ....................................................................................................................................................... 130
5.1.1.7 Warning Light Linkage................................................................................................................................. 130
5.1.1.8 Audio Linkage................................................................................................................................................... 130
5.1.2 Subscribing Alarm..................................................................................................................................................... 131
5.1.2.1 About Alarm Types......................................................................................................................................... 131

Operation Manual
XI
5.1.2.2 Subscribing Alarm Information............................................................................................................... 131
5.2 Setting Smart Track............................................................................................................................................................. 132
5.2.1 Setting Calibration Parameters for Smart Track........................................................................................ 132
5.2.2 Enabling Alarm Track............................................................................................................................................... 134
5.3 Setting Panoramic Calibration....................................................................................................................................... 135
5.4 Setting Video Detection.................................................................................................................................................... 137
5.4.1 Setting Motion Detection ...................................................................................................................................... 137
5.4.2 Setting Video Tampering....................................................................................................................................... 139
5.4.3 Setting Scene Changing ......................................................................................................................................... 140
5.5 Setting Smart Motion Detection................................................................................................................................... 141
5.6 Setting Audio Detection.................................................................................................................................................... 142
5.7 Setting Smart Plan ............................................................................................................................................................... 144
5.7.1 Basic Smart Plan......................................................................................................................................................... 144
5.7.2 Schedule......................................................................................................................................................................... 145
5.8 Setting IVS................................................................................................................................................................................ 147
5.8.1 Global Configuration ............................................................................................................................................... 147
5.8.2 Rule Configuration.................................................................................................................................................... 149
5.9 Setting Crowd Map .............................................................................................................................................................. 153
5.9.1 Global Configuration ............................................................................................................................................... 153
5.9.2 Rule Configuration.................................................................................................................................................... 154
5.10 Setting Face Recognition ............................................................................................................................................... 157
5.10.1 Setting Face Detection ......................................................................................................................................... 157
5.10.2 Setting Face Database .......................................................................................................................................... 159
5.10.2.1 Creating Face Database ............................................................................................................................ 160
5.10.2.2 Adding Face Picture.................................................................................................................................... 161
5.10.2.2.1 Single Adding...................................................................................................................................... 161
5.10.2.2.2 Batch Importing ................................................................................................................................. 164
5.10.2.3 Managing Face Picture.............................................................................................................................. 165
5.10.2.3.1 Modifying Face Information........................................................................................................ 166
5.10.2.3.2 Deleting Face Picture ...................................................................................................................... 166
5.10.2.4 Face Modeling................................................................................................................................................ 166
5.10.3 Setting Face Recognition Alarm Linkage.................................................................................................... 168
5.10.4 Viewing Face Recognition Result.................................................................................................................... 169
5.10.4.1 Viewing Result in the Live Interface ................................................................................................... 169
5.10.4.2 Viewing Result by Search Function..................................................................................................... 170
5.11 Setting Face Detection .................................................................................................................................................... 171
5.12 Setting People Counting................................................................................................................................................ 174

Operation Manual
XII
5.12.1 People Counting...................................................................................................................................................... 174
5.12.2 Calibration Configuration................................................................................................................................... 178
5.12.3 Queuing ....................................................................................................................................................................... 179
5.12.4 Viewing People Counting Diagram................................................................................................................ 181
5.12.5 Viewing People Counting Report ................................................................................................................... 182
5.13 Setting Heat Map ............................................................................................................................................................... 184
5.13.1 Heat Map ..................................................................................................................................................................... 184
5.13.2 Viewing Heat Map Report................................................................................................................................... 184
5.14 Setting Vehicle Density................................................................................................................................................... 185
5.15 Setting Stereo Analysis ................................................................................................................................................... 188
5.15.1 Setting Rules for Stereo Analysis .................................................................................................................... 188
5.15.2 Calibration Configuration................................................................................................................................... 193
5.15.3 Zoom Calibration .................................................................................................................................................... 193
5.15.4 Viewing Report......................................................................................................................................................... 194
5.16 Setting ANPR........................................................................................................................................................................ 195
5.16.1 Scene Configuration.............................................................................................................................................. 195
5.16.2 Setting Picture Overlay........................................................................................................................................ 197
5.16.3 Viewing ANPR Report ........................................................................................................................................... 198
5.17 Setting Video Metadata.................................................................................................................................................. 198
5.17.1 Scene Configuration.............................................................................................................................................. 198
5.17.2 Setting Picture Information............................................................................................................................... 201
5.17.3 Viewing Video Metadata Report ..................................................................................................................... 202
5.18 Setting Relay-in................................................................................................................................................................... 202
5.18.1 Relay-in (1).................................................................................................................................................................. 202
5.18.2 Relay-in (2).................................................................................................................................................................. 203
5.19 Setting Abnormality......................................................................................................................................................... 204
5.19.1 Setting SD Card ........................................................................................................................................................ 204
5.19.2 Setting Network....................................................................................................................................................... 205
5.19.3 Setting Illegal Access............................................................................................................................................. 206
5.19.4 Setting Voltage Detection .................................................................................................................................. 206
5.19.5 Setting Security Exception................................................................................................................................. 207
5.19.6 Setting Disarming................................................................................................................................................... 208
6 Maintenance ...................................................................................................................................................................................... 210
6.1 Requirements ......................................................................................................................................................................... 210
6.2 Auto Maintain......................................................................................................................................................................... 210
6.3 Resetting Password ............................................................................................................................................................. 210
6.4 Backup and Default ............................................................................................................................................................. 213

Operation Manual
XIII
6.4.1 Import/Export.............................................................................................................................................................. 213
6.4.2 Default............................................................................................................................................................................. 213
6.5 Upgrade..................................................................................................................................................................................... 214
6.6 Information.............................................................................................................................................................................. 214
6.6.1 Version ............................................................................................................................................................................ 215
6.6.2 Log..................................................................................................................................................................................... 215
6.6.3 Remote Log................................................................................................................................................................... 216
6.6.4 Online User.................................................................................................................................................................... 216
Appendix 1 Cybersecurity Recommendations..................................................................................................................... 218

Operation Manual
1
1 Overview
1.1 Introduction
IP camera (Internet Protocol camera), is a type of digital video camera that receives control data and
sends image data through internet. They are commonly used for surveillance, requiring no local
recording device, but only a local area network.
IP camera is divided into single-channel camera and multi-channel camera according to the channel
quantity. For multi-channel camera, you can set the parameters for each channel.
1.2 Network Connection
In the general IPC network topology, IPC is connected to PC through network switch or router.
Figure 1-1 General IPC network
Get IP address by searching on ConfigTool, and then you can start accessing IPC through network.
1.3 Function
Functions might vary with different devices.
1.3.1 Basic Function
Real-time Monitoring
●Live view.
●When live viewing the image, you can enable audio, voice talk and connect monitoring center for
quick processing on the abnormality.
●Adjust the image to the proper position by PTZ.
●Snapshot and triple snapshot abnormality of the monitoring image for subsequent view and
processing.

Operation Manual
2
●Record abnormality of monitoring image for subsequent view and processing.
●Configure coding parameters, and adjust live view image.
Record
●Auto record as schedule.
●Play back recorded video and picture as needed.
●Download recorded video and picture.
●Alarm linked recording.
Account
●Add, modify and delete user group, and manage user authorities according to user group.
●Add, modify and delete user, and configure user authorities.
●Modify user password.
1.3.2 Intelligent Function
Alarm
●Set alarm prompt mode and tone according to alarm type.
●View alarm prompt message.
Smart Track
●Set calibration and parameters for smart track and enable alarm track.
●Switch between smart track and speed dome auto track.
Video Detection
●Motion detection, video tampering detection and scene changing detection.
●When an alarm is triggered, the system performs linkages such as recording, alarm output,
sending email, PTZ operation, and snapshot.
Smart Motion Detection
●Avoid the alarms triggered by the environment changes.
●When an alarm is triggered, the system performs linkages such as recording, alarm output,
sending email, PTZ operation, and snapshot.
Audio Detection
●Audio input abnormal detection and intensity change detection.
●When an alarm is triggered, the system performs linkages such as recording, alarm output,
sending email, PTZ operation, and snapshot.
IVS
●Tripwire, intrusion, abandoned object, moving object, fast moving, parking detection, people
gathering, and loitering detection.
●When an alarm is triggered, the system performs linkages such as recording, alarm output,
sending email, and snapshot.

Operation Manual
3
Crowd Map
●View crowd distribution in real time for the timely arm to avoid accidents like stampede.
●When an alarm is triggered, the system performs linkages such as recording, alarm output,
sending email, PTZ operation, and snapshot.
Face Detection
●Detect face and display the related attributes on the live interface.
●When an alarm is triggered, the system performs linkages such as recording, alarm output,
sending email, PTZ operation, and snapshot.
Face Recognition
●After detecting face, make comparison between the detected face with the face in face database,
and activates alarm output.
●Query the recognition result.
People Counting
●Count the people flow in/out the detection area, and generate report.
●When an alarm is triggered, the system performs linkages such as recording, alarm output,
sending email, PTZ operation, and snapshot.
Heat Map
●Count cumulative density of moving objects.
●View report of heat map.
Vehicle Density
●Supports traffic congestion detection and parking upper limit detection.
●View the statistic data on the live interface.
●When an alarm is triggered, the system performs linkages such as recording, alarm output,
sending email, and snapshot.
Stereo Analysis
●Include Activation Analysis, Back Detection, Fall Detection, Walking Detection, Blackboard
Writing Detection, Violence Detection, People No. Error, Stand Detection, Running Detection,
People Approaching Detection, and Strand Detection.
●When an alarm is triggered, the system performs linkages such as recording, alarm output,
sending email, PTZ operation, and snapshot.
ANPR
●Recognize plate number in detection area, and display the related information on live interface.
●When an alarm is triggered, the system links alarm output and snapshot.
Video Metadata
●Snap people, non-motor vehicle and vehicle, and display the related information on the live
interface.
●When an alarm is triggered, the system links alarm output.

Operation Manual
4
Alarm Setting
●The alarm is triggered when an external alarm input device inputs alarm.
●When an alarm is triggered, the system performs linkages such as recording, alarm output,
sending email, PTZ operation, and snapshot.
Abnormality
●SD card error, network disconnection, illegal access, voltage detection and security exception.
●When SD card error or illegal access is triggered, the system links alarm output and sending
email.
●When network disconnection alarm is triggered, the system links recording and alarm output.
●When the input voltage is more or less than the rated voltage, the alarm is triggered and the
system links sending email.

Operation Manual
5
2 Configuration Flow
For the device configuration flow, see Figure 2-1. For details, see Table 2-1. Configure the device
according to the actual situation.
Figure 2-1 Configuration flow
Table 2-1 Description of flow
Configuration Description Reference
Login
Open IE browser and enter IP
address to log in to the web
interface, The camera IP address is
192.168.1.108 by default.
"4.1 Login"
Initialization Initialize the camera when you use
it for the first time.
"3 Device
Initialization"
Basic parameters
IP address
Modify IP address according to
network planning for the first use or
during network adjustment.
"4.6.1 TCP/IP"
Date & time Set date and time to ensure the
recording time is correct. "4.8.2 Date & Time"
Image
parameters
Adjust image parameters according
to the actual situation to ensure the
image quality.
"4.5.1 Camera
Conditions"
Intelligent Event
Detection
rules
Configure the necessary detection
rules, such as video detection and
IVS.
"5 Event"
Subscribe
alarm
Subscribe alarm event. When the
subscribed alarm is triggered, the
system will record the alarm on the
alarm tab.
"5.1.2 Subscribing
Alarm"

Operation Manual
6
3 Device Initialization
Device initialization is required for the first use. This manual is based on the operation on the web
interface. You can also initialize device through ConfigTool, NVR, or platform devices.
●To ensure the device safety, keep the password properly after initialization and change the
password regularly.
●When initializing device, keep the PC IP and device IP in the same network.
Step 1 Open IE browser, enter the IP address of the device in the address bar, and then press Enter
key.
The IP is 192.168.1.108 by default.
Figure 3-1 Device initialization
Step 2 Set the password for admin account.
Table 3-1 Description of password configuration
Parameter Description
Username The default username is admin.
Password The password must consist of 8 to 32 non-blank characters and
contain at least two types of characters among upper case, lower
case, number, and special character (excluding ' " ; : &). Set a high
security level password according to the password security notice.
Confirm password
email
Enter an email address for password reset, and it is selected by
default.
When you need to reset the password of the admin account, a
security code for password resetting will be sent to the reserved
email address.
Step 3 Click Save.