Dahua DHI-NVR5216-16P-4KS2E User manual

Network Video Recorder
Quick Start Guide
Version 1.0.0

i
Table of Contents
1Preparation Work .............................................................................................................1
2HDD Installation................................................................................................................2
2.1 SMART BOX ..........................................................................................................2
2.2 SMART 1U..............................................................................................................2
2.3 MINI 1U, COMPACT 1U, 1U................................................................................3
3Rear Panel.........................................................................................................................4
4GUI Operation...................................................................................................................6
4.1 Boot up ....................................................................................................................6
4.2 Device Initialization................................................................................................6
4.3 Change IP Address .............................................................................................10
4.4 Camera Registration ...........................................................................................10
4.5 Schedule ...............................................................................................................11
4.6 Playback................................................................................................................12
4.7 Shut down .............................................................................................................13
5Web Operation................................................................................................................14
5.1 Login ......................................................................................................................14
6P2P...................................................................................................................................16

ii
Welcome
Thank you for purchasing our network video recorder!
This quick start guide is designed to be a reference tool for your system.
Keep it well for future reference.
Contact your local retailer ASAP if something is missing or damaged in the bag.
Safety Instruction
Icon
Note
DANGER
Indicates a hazard with a high level of risk, which if not avoided, will
result in death or serious injury.
WARNING
Indicates a potentially hazardous situation, which if not avoided,
could result in device damage, data loss, performance degradation,
or unexpected results.
Anti-static
Indicates it is the static sensitive device.
Eletric shock
risk
Indicates presence of dangerous high voltage. There is a risk of
electric shock to persons.
High power
laser radiation risk
Indicates presence of high power laser radiation.
Tips
It is intended to help you to fix a problem or save your time.
Note
Provides additional information to emphasize or supplement
important points of the main text.

iii
Important Safeguards and Warnings
1．Electrical safety
All installation and operation here should conform to your local electrical safety codes.
An apparatus with CLASS I construction shall be connected to a MAINS socket outlet with a
protective earthing connection.
Use a power supply which meets the requirements for SELV (Safety Extra Low Voltage) and
complies with Limited Power Source according to IEC 60950-1. Refer to the device label for
detailed information.
The product must be grounded to reduce the risk of electric shock.
We assume no liability or responsibility for all the fires or electric shock caused by improper
handling or installation.
2．Transportation security
Heavy stress, violent vibration or water splash are not allowed during transportation, storage
and installation.
3．Installation
Keep upwards. Handle with care.
Do not apply power to the NVR before completing installation.
Do not place objects on the NVR.
4．Qualified engineers needed
All the examination and repair work should be done by the qualified service engineers.
We are not liable for any problems caused by unauthorized modifications or attempted repair.
5．Environment
The NVR should be installed in a cool, dry place away from direct sunlight, inflammable,
explosive substances and etc.
This series product shall be transported, storage and used in the specified environments.
Environment which needs to comply with the following conditions:
The function of the ITE being investigated to IEC 60950-1 is considered not likely to require
connection to an Ethernet network with outside plant routing, including campus environment.
The installation instructions clearly state that the ITE is to be connected only to PoE
networks without routing to the outside plant.
6. Accessories
Be sure to use all the accessories recommended by manufacturer.
Before installation, please open the package and check all the components are included.
Contact your local retailer ASAP if something is broken in your package.
7. Lithium battery
Improper battery use may result in fire, explosion, or personal injury!
When replace the battery, please make sure you are using the same model!
CAUTION

iv
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.

1
1Preparation Work
DANGER
All the installation and operations here should conform to your local electric safety
rules.
SN
Name
Contents
1
Whole
package
Appearance
There is any visible damage or not.
Package
There is any accidental clash during
transportation or not.
2
Front
panel and
rear
panel
The model on the front
panel
Check the model with the purchase
order.
The label on the rear
panel.
It is neat and clean or not.
Note
Do not tear off, or discard the label.
Usually we need you to represent the
serial number when we provide the
service after sales.
3
Case
Appearance
There is any visible damage or not.
Check the data cable,
power cable, fan cable,
main board and etc.
Check the connection is secure or not.
Note
Contact your local retailer or our
service engineer if the connection is
loosen.

2
2HDD Installation
DANGER
Shut down the device and then unplug the power cable before you open the case to
replace the HDD!
All figures listed below for reference only!
2.1 SMART BOX
Please make sure the metal surface of the HDD is facing up when you are installing!
This series product has only one 2.5-inch SATA HDD.
Please follow the instructions below to install HDD.
○
1Draw out the HDD bracket
○
2Make sure the HDD metal
surface is facing up and then put
the HDD into the bracket
horizontally. After the HDD is in
the proper position, the columns
on the two sides can lock the
screw holes of the HDD to secure
it.
○
3Put the HDD into the
device.
When you remove the HDD, please refer to the following figure to pull the spring up and then remove the
HDD.
2.2 SMART 1U
For the first time to install, please check the HDD has been installed or not.
Refer to the user manual for HDD space information and recommended HDD brand. Please use HDD of
7200rpm or higher. Usually we do not recommend the PC HDD.

3
○
1. Loosen the screws of the bottom of
the chassis.
○
2Place the HDD in
accordance with the four holes
in the bottom.
○
3Turn the device upside
down and then secure the
screws firmly.
○
4Connect the HDD cable and power
cable to the HDD and the mainboard
respectively.
○
5Put the cover back and then
fix the screws of the rear panel.
The installation is complete.
2.3 MINI 1U, COMPACT 1U, 1U
For the first time to install, please check the HDD has been installed or not.
Refer to the user manual for HDD space information and recommended HDD brand. Please use HDD of
7200rpm or higher. Usually we do not recommend the PC HDD.
①Loosen the screws of the
upper cover and side panel.
②Connect the one end of the
HDD data cable and the power
cable to the mainboard.
③Connect the other end of the
HDD data cable and the power
cable to the HDD.
④Place the HDD in accordance
with the four holes on the bottom
of the chassis.
⑤Turn the device upside down; fix
the screws to secure the HDD on
the bottom of the chassis.
⑥Put the cover in accordance
with the clip and then fix the
screws on the rear panel and
side panel.

4
3Rear Panel
Follow figures listed here for reference only. Please refer to the actual product for detailed information.
For SMART BOX series product, the front panel is shown as in Figure 3-1.
Figure 3-1
For SMART 1U series product, the front panel is shown as in Figure 3-2.
Figure 3-2
For mini 1U, compact 1U series product, the front panel is shown as in Figure 3-3.
Figure 3-3
For 1U series product, the front panel is shown as in Figure 4-4
Figure 3-4
Note

5
Please check the icon on the rear panel carefully. Please refer to the actual product for detailed
information.
If the icon is , it inputs DC 12V power. If the icon is , it inputs the DC 48V power.
The 4PoE series product supports 48V 50W total power. The 8PoE series products supports 48V
120W total power.