Dahua DH-IVS-IP8000-E-GU1 User manual

Event Detection Intelligent Server
Deployment Manual
ZHEJIANG DAHUA VISION TECHNOLOGY CO., LTD. V1.0.0

Deployment Manual
I
Foreword
General
This manual introduces the functions and operations of the Event Detection Intelligent Server
(hereinafter referred to as "the Server").
Models
Device Model
1U DH-IVS-IP8000-E-GU1
2U DH-IVS-IP8000-2E-GU2, DH-IVS-IP8000-3E-GU2, DH-IVS-IP8000-4E-GU2,
DH-IVS-IP8000-5E-GU2, and DH-IVS-IP8000-6E-GU2
Safety Instructions
The following signal words might appear in the manual.
Signal Words Meaning
Indicates a high potential hazard which, if not avoided, will result in
death or serious injury.
Indicates a medium or low potential hazard which, if not avoided,
could result in slight or moderate injury.
Indicates a potential risk which, if not avoided, could result in
property damage, data loss, reductions in performance, or
unpredictable results.
Provides methods to help you solve a problem or save time.
Provides additional information as a supplement to the text.
Revision History
Revision Content Release Time Revision Content
V1.0.0 First release. December 2021
Privacy Protection Notice
As the device user or data controller, you might collect the personal data of others such as their face,
fingerprints, and car plate number. You need to be in compliance with your local privacy protection
laws and regulations to protect the legitimate rights and interests of other people by implementing
measures which include but are not limited: Providing clear and visible identification to inform
people of the existence of the surveillance area and provide required contact information.
About the Manual
●The manual is for reference only. Slight differences might be found between the manual and the
product.

Deployment Manual
II
●We are not liable for losses incurred due to operating the product in ways that are not in
compliance with the manual.
●The manual will be updated according to the latest laws and regulations of related jurisdictions.
For detailed information, see the paper user’s manual, use our CD-ROM, scan the QR code or visit
our official website. The manual is for reference only. Slight differences might be found between
the electronic version and the paper version.
●All designs and software are subject to change without prior written notice. Product updates
might result in some differences appearing between the actual product and the manual. Please
contact customer service for the latest program and supplementary documentation.
●There might be errors in the print or deviations in the description of the functions, operations
and technical data. If there is any doubt or dispute, we reserve the right of final explanation.
●Upgrade the reader software or try other mainstream reader software if the manual (in PDF
format) cannot be opened.
●All trademarks, registered trademarks and company names in the manual are properties of their
respective owners.
●Please visit our website, contact the supplier or customer service if any problems occur while
using the device.
●If there is any uncertainty or controversy, we reserve the right of final explanation.

Deployment Manual
III
Important Safeguards and Warnings
This section introduces content covering the proper handling of the device, hazard prevention, and
prevention of property damage. Read carefully before using the device, comply with the guidelines
when using it, and keep the manual safe for future reference.
Operation Requirements
●Transport, use and store the device under allowed humidity and temperature conditions.
●Prevent liquids from splashing or dripping on the device. Make sure that there are no objects
filled with liquid on top of the device to avoid liquids flowing into it.
●Do not disassemble the device.
●Only use the device within the rated power range.
●Make sure that the power supply of the device works properly before use.
●Do not pull out the power cable of the device while it is powered on.
Installation Requirements
●Observe all safety procedures and wear required protective equipment provided for your use
while working at heights.
●Do not expose the device to direct sunlight or heat sources.
●Do not install the device in humid, dusty or smoky places.
●Install the device in a well-ventilated place, and do not block the ventilator of the device.
●Strictly abide by local electrical safety standards, and make sure that the voltage in the area is
steady and conforms to the power requirements of the device.
●Use the power adapter or case power supply provided by the device manufacturer.
●Connect the device to the adapter before power on.
●Do not connect the device to more than one power supply. Otherwise, the device might become
damaged.
●The power supply must conform to the requirements of ES1 in IEC 62368-1 standard and be no
higher than PS2. Note that the power supply requirements are subject to the device label.
●Connect class I electrical appliances to a power socket with protective earthing.

Deployment Manual
IV
Table of Contents
Foreword ........................................................................................................................................................................................................I
Important Safeguards and Warnings............................................................................................................................................III
1 (Optional) Deploying Server...........................................................................................................................................................1
1.1 Before Deployment ..................................................................................................................................................................1
1.1.1 Preparing USB Drive and Installation Package ...............................................................................................1
1.1.2 System Requirements...................................................................................................................................................1
1.2 Installing CentOS System and Program.........................................................................................................................2
1.2.1 Preparing USB Flash Drive .........................................................................................................................................2
1.2.2 Selecting Bootup Menu ...............................................................................................................................................4
1.2.3 Selecting USB Flash Drive...........................................................................................................................................4
1.2.4 Selecting Operating System......................................................................................................................................5
1.2.5 Selecting Language .......................................................................................................................................................5
1.2.6 Setting System Time .....................................................................................................................................................6
1.2.7 Selecting Software Installation Mode ..................................................................................................................7
1.2.8 Configuring Partition....................................................................................................................................................9
1.2.9 Starting Installation ....................................................................................................................................................14
1.2.10 Setting Password .......................................................................................................................................................15
1.2.11 Restarting.......................................................................................................................................................................16
1.2.12 Installing Basic Package and Driver..................................................................................................................17
2 Service Software Installation........................................................................................................................................................21
2.1 Modifying Script.......................................................................................................................................................................21
2.2 Installing Service Software.................................................................................................................................................24
3 Deploying Platform...........................................................................................................................................................................26
3.1 Logging in to Unified Operation Platform..................................................................................................................26
3.2 Initializing Unified Operation Platform .......................................................................................................................28
3.2.1 Searching Nodes ...........................................................................................................................................................28
3.2.2 Deploying MySQL.........................................................................................................................................................29
3.2.3 Selecting Configuration Mode...............................................................................................................................30
3.3 Managing Server......................................................................................................................................................................31
4 Installing Event Detection Server...............................................................................................................................................35
4.1 Managing Product...................................................................................................................................................................35
4.2 Installing New PaaS Cluster................................................................................................................................................37
4.3 Configuring Behavior SaaS.................................................................................................................................................43
4.4 Configuring Operator............................................................................................................................................................47
5 Applying for Encryption..................................................................................................................................................................49

Deployment Manual
V
5.1 Checking Dongle......................................................................................................................................................................49
5.2 Software-based Encryption................................................................................................................................................49
5.3 Hardware-based Encryption..............................................................................................................................................54
Appendix 1 Cybersecurity Recommendations........................................................................................................................56

Deployment Manual
1
1 (Optional) Deploying Server
If it is a baseline server, you can skip this chapter and install the service software directly. For details,
see "2 Service Software Installation".
1.1 Before Deployment
Before deployment, you need to prepare all installation packages and required devices.
1.1.1 Preparing USB Drive and Installation Package
Before deployment, you need to prepare USB drive and download the following packages from GDP.
●CentOS 7.4 system package (material No.: 2.4.01.01.12619)CentOS-7-x86_64-Everything-1708.iso
One USB flash drive (8 GB or larger size, 16 GB is recommended).
●Basic package (material No.:
2.7.07.01.01317)General_IVS-CentOS7.4-Base_CPU-X86-MD5-****_V1.***.*******.*.R.******.tar.gz
●Atlas driver
packageGeneral_IVS-CentOS7.4-Base_Driver_Atlas-X86-MD5-****_V1.***.*******.*.R.******.tar.gz
●Program packageGeneral_IVS-IP8000-E_ChnEng_MD5-****_V1.***.*******.*.******.tar.gz
●Client installation packageGeneral_IVS-IBC_Base_IS_V1.0.0.******.R.********.exe
The package name varies with version and release date.
1.1.2 System Requirements
Table 1-1 System requirements
Parameter Description
Operating system CentOS 7.4
Kernel version 3.10.0-693.el7.x86_64
CPU Intel Xeon E3-1275 v5 @3.50 GHz
Intel graphics P530
Graphics AIX3200

Deployment Manual
2
1.2 Installing CentOS System and Program
Prepare the USB flash drive, and install the CentOS system.
You must execute the root commands to configure the settings.
1.2.1 Preparing USB Flash Drive
Prepare the USB flash drive for installing CentOS system of the server.
Prerequisites
●A USB flash drive with size≥8 GB.
●A computer installed with UltraISO.
●CentOS 7.4 system package was saved to the computer.
Background Information
Skip this chapter if CentOS 7.4 system has been installed on the server.
Procedure
Step 1 Double-click to open UltralSO.
Step 2 Select File > Open, select the CentOS 7.4 installation package, and then click Open.
Figure 1-1 Open file
Step 3 Select Bootable > Write Disk Image.

Deployment Manual
3
Figure 1-2 Write disk image (1)
Step 4 Configure Disk Drive and Write Method, and then click Write.

Deployment Manual
4
Generally, you only need to leave them as default.
Figure 1-3 Write disk image (2)
Step 5 Click Yes in the pop-up window.
The system starts writing data, and the progress bar is displayed.
Step 6 After successfully burning the USB drive, click Close.
1.2.2 Selecting Bootup Menu
Background Information
Insert the USB flash drive into the server, restart the server, and then select an option similar to boot
manager.
Different servers have different boot options. Refer to the options of the actual server.
1.2.3 Selecting USB Flash Drive
Background Information
Select the corresponding USB flash drive.