Daintree ZBT-S1AWH User manual

The Self-Powered Wireless Rocker Switch (ZBT-S1AWH)
is a wireless transmitter that communicates with Daintree
EZ Connect sensors. The switch uses battery-free, energy
harvesting technology. Every time the switch is pressed a
micro-generator produces a small electrical current that powers
a built-in transmitter. This transmitter sends wireless radio
signals that are used to remotely control a compatible system.
For application spaces in need of a system that is simple,
easy to install, and code complaint, Current offers Daintree
EZ Connect, our mobile app based wireless controls system
that provides zonal control and commissioning of lighting
systems. The Daintree EZ Connect mobile app and integrated
sensors allow customers to zone lighting xtures. This simple
tool can dramatically decrease the installation time and
expertise required to commission a room-based lighting
controls system for deployments of all sizes and complexities.
The app is available for download on the iOS store.
• Easy Deployment: Daintree EZ Connect mobile
app simplies and reduces the installation process,
minimizing disruption to enterprise operations.
• Zoned Communication: Fixtures can be zoned
and the sensors talk to each other to react in
concert with each other to occupancy, daylight
and wall controls.
• Simplicity: Integration with xtures reduces the
amount of devices that need to be installed in a
room.
• Room Based Control: Customize the lighting
parameters to the task that is being performed in
the application space.
• Code Compliant: Integrated wireless sensors offer
daylight harvesting and granular lighting controls.
Project Name
Date Type
Catalog Number
Description
Daintree™Wireless Controls
Self-Powered Wireless Rocker Switch
Product Dimensions
4.50 2.80
2.75 0.25 0.37
0.32
1.76
SKU Product Description
ZBT-S1AWH Single Rocker Self-Powered
ZigBee Switch
Ordering Information
• ZigBee Green Power
(included in ZigBee 3.0)
• Lumination LED Luminaires integrated with Daintree
EZ Connect controls
• WIT100 sensors
• LCA kit can be added to any 0-10V luminaire to enable
Daintree EZ Connect controls.
Compatible with:

2
Daintree™ |Single Rocker Self-Powered ZigBee®Switch
Mounting Commissioning
Commission (link) the switch to the compatible
system before mounting.
The light switch is compatible with standard
decorator style faceplates.
A faceplate is included.
PART 1
Activate commissioning (or linking) mode for a
system compatible with the switch.
If you don’t know how to do this, consult the manual for
the compatible system or contact the manufacturer for
assistance.
PART 2
Put the switch into commissioning mode.
To enter commissioning mode, start by selecting one
button on the switch. (Use the same button for the
entire sequence. Pressing any other button will exit the
commissioning mode.)
Next, execute the following long-short-long sequence:
1. Press and hold the selected button formore than 7
seconds before releasing it
2. Press the selected button quickly(hold for less than 2
seconds)
3. Press and hold the selected button againfor more
than 7 seconds before releasing it
The switch has now entered commissioning mode.
PART 3
Linking the switch to the compatible system.
A radio signal needs to be sent from the switch to the
compatible system on the correct ZigBee channel.
The system uses one of sixteen possible channels,
automatically set by the system. Using the switch, a
signal will be sent on each channel until the channel
used by the compatible system is found.
Upon entering commissioning mode, the switch sends
a signal on the currently selected channel. The signal is
sent on the default channel 11, unless the switch had
been put on another channel previously. (This allows
linking additional devices without changing the
currently used radio channel.)
For surface mount, attach included backplate to the
wall using screws or adhesive.
Surface Mount
Flush Mount
For ush mount, mount the switch without the
backplate into either a standard electrical switch box or
a low voltage mounting bracket using included screws.
Zonal Control & Commissioning
Current offers Daintree EZ Connect,
our mobile app based wireless controls
system that provides zonal control and
commissioning of lighting systems. The app
is available for download on the iOS store.

© 2020 Current Lighting Solutions, LLC. All rights reserved. GE and the GE monogram are
trademarks of the General Electric Company and are used under license. iBeacon is a trademark of
Apple Inc. Information provided is subject to change without notice. All values are design or typical
values when measured under laboratory conditions.
CTRL036 (Rev 09/18/20)
Daintree™ |Single Rocker Self-Powered ZigBee®Switch
www.gecurrent.com
T1-888-694-3533
Commissioning (cont.)
Cycle through the sixteen channels
Here is a chart of the ZigBee channels and the
corresponding radio frequencies (in MHz).
When the switch is on the correct channel,
the compatible system will provide a link
conrmation indication.
Consult the instructions for the compatible system
for details of the link conrmation indication.There
should be a visible or audible exchange indicated
on the system, and the switch will be linked to the
system.
Exit linking mode on the switch by pressing any
other button on the switch.
For problems with the compatible system, please
contact the system provider.
To change the switch’s channel, short press the
selected switch button (less than 7 seconds) once
after entering commissioning mode. This will reset the
channel used by the switch to channel 11.
If the switch was already operating on channel 11
(default condition) then the radio channel will remain
unchanged. This ensures that the switch will always
use channel 11 as the starting point for the channel
adjustment.
Short press the selected button (less than 7
seconds) again to move to the next channel.
For each such button press, the switch transmits on
the next channel. If channel 26 has been reached then
channel 11 will be used next.
*Daintree EZ Connect Preprogrammed to Channel ID 15
Channel ID Lower Center Upper
Frequency Frequency Frequency
11 2404 2405 2406
12 2409 2410 2411
13 2414 2415 2516
14 2419 2420 2421
15* 2424 2425 2426
16 2429 2430 2431
17 2434 2435 2436
18 2439 2440 2441
19 2444 2445 2446
20 2449 2450 2451
21 2454 2455 2456
22 2459 2460 2461
23 2464 2465 2466
24 2469 2479 2471
25 2474 2475 2476
26 2479 2480 2481
ZBT-S1AWH Daintree EZ Connect Self-Powered
Wireless Rocker Switch
Range 30-100 ft or 10-30 m (typical)
Frequency 2.4 GHz (ZigBee channels 11-26)
Power Supply Self-generated when switch is pressed
Buttons 2 (1 rocker)
Dimensions 2.75 (W) x 4.5 (H) x 0.62 (D) inches
Operating -13º to +149º F
Temperature (-25º to +65º C)
Radio Certied according to FCC, IC
Certications and CE regulations
Addressing Factory Set Unique ID
Specications
Contains FCC ID: SVZ-PTM215Z
Contains IC: 5713A-PTM215Z
The enclosed device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (i.) this device may not cause
harmful interference and (ii.) this device must accept any interference
received, including interference that may cause undesired operation.
Always follow local electrical codes when installing this device. Installation
should be performed by a qualied electrician.
This device or certain aspects thereof is protected by at least one of the U.S.
or international patent or has at least one such patent application pending.