Dakota Digital VHX-49F User manual

Manual # 650401A
VHX-49F
Dakota Digital VHX Instrument Installation
For 1949-‘50 Ford Car
Your new VHX-49F kit includes:
Installation
Control Box
CAT5 Cable
Universal Sender Pack
Installation Manuals
VHX Display
1. Remove the stock cluster from the dash and be sure to retain all hardware for reassembly.
Ford Adapter
Switch Assembly Switch Assembly Switch Assembly Switch Assembly
Switch Assembly

Manual # 650401A
WARNING: This product can expose you to chemicals including lead, which is known to the State of
California to cause cancer and birth defects or other reproductive harm. For more information go to
www.P65Warnings.ca.gov
2. Remove the protective tape from the clear lens.
3. Connect the CAT5 cable to the system as the
VHX cluster is installed into the dash. Watch
carefully so you don’t scratch or damage the lens
or bezel, and take care when routing the CAT5
cable to the control box location.
4. Re-install the cluster into the vehicle using stock hardware and refer to
the main manual for wiring instructions to complete the VHX installation.