Daktronics SLD 110 User manual

SLD 110" Installation Manual
DD5065833
Rev 01
01 November 2022
201 Daktronics Drive
Brookings, SD 57006-5128
www.daktronics.com/support
800.325.8766
Page 1 of 27
Table Of Contents
Unpacking - Page 2
Installation Parts and Tools - Page 3
Part A: Upper Beam Installation - Page 4
Part B: Cabinets Installation - Page 8
Part C: Bottom Beam Installation - Page 17
Part D: Power Box Installation - Page 20
Part E: LED Module Installation - Page 25
Warnings and Disclaimers
• Ensure that all electrical work meets or
exceeds all local or national electrical codes.
• Provide the required power to the display as
listed on the product labels, specications,
or site-specic riser drawings. The conductor
size may vary based on the length of the
power run.
• Consider implementing a separate circuit for
the display using an isolation transformer or
dedicated transformer.
• Daktronics assumes no liability for any issues
caused by line voltage uctuations or other
improper power conditions.

SLD 110" Installation Manual
DD5065833
Rev 01
01 November 2022
201 Daktronics Drive
Brookings, SD 57006-5128
www.daktronics.com/support
800.325.8766
Page 2 of 27
Unpacking
SLD 110" UNPACKING INSTRUCTION
STEP 2: TAKE OUT THE PACKAGESSTEP 1: OPEN CRATE
Crate 1
CONTROL BOX & REAR BEAMS
CONTROL BOX @1 REAR BEAM @2
HARDWARE & TOOL BOX @7
Crate 2
4 CABINETS & MODULES & SPARE PARTS
152x103x96 cm 59.8x40.6x37.8 inch
145x96x80 cm
STEP 2: TAKE OUT THE FILLER BOXSTEP 1: OPEN CRATE
THE CONCEPTS EXPRESSED AND DETAILS SHOWN ON THIS DRAWING
ARE CONFIDENTIAL AND PROPRIETARY. DO NOT REPRODUCE BY
ANY MEANS WITHOUT THE EXPRESS WRITTEN CONSENT OF
DAKTRONICS, INC. OR ITS WHOLLY OWNED SUBSIDIARIES.
COPYRIGHT 2022 DAKTRONICS, INC. (USA)
THIRD ANGLE PROJECTION
REV
TITLE:
PROJECT:
DESIGN:
SCALE:
DIM UNITS:DATE: SHEET
DO NOT SCALE DRAWING
FUNC - TYPE - SIZE
DRAWN: -
JOB NO.
-
MILLIMETERS
SLD SERIES DISPLAY PROJECT
SLD 110" UNPACKING INSTRUCTION
JW
27-OCT-2022
F 10 A3
NO SCALE
JW 5159994
001 OF 1
A3H
STEP 3: TAKE OUT MODULES & SPARES PACKAGES STEP 4: TAKE OUT CABINETS PACKAGES
MIDDLE CABINETS @1 LEFT & RIGHT CABINET @1 MODULE BOX @3 SPARE PARTS BOX @1
FILLER (FILLED EMPTY SPACE)

SLD 110" Installation Manual
DD5065833
Rev 01
01 November 2022
201 Daktronics Drive
Brookings, SD 57006-5128
www.daktronics.com/support
800.325.8766
Page 3 of 27
Installation Parts and Tools
DAKTRONICS PROVIDED CUSTOMER PROVIDED
HC-4084277
M8X50 SOCKET HEAD BOLT
0M-4671476
CABINET FLATNESS JIG
HC-1855
M6X16 SOCKET HEAD BOLT
HC-4827328
M8X15 COUNTERSUNK SOCKET HEAD BOLT
TH-4896293
PHILLIPS SCREWDRIVER
0A-2238-9999
MODULE TOOL (INSTALL AND REMOVAL)
TH-4964504
GLOVES
W-4137608
POWER INPUT CABLE
MOUNTING ANCHOR BOLT
CORDLESS DRILL
SOCKET FOR ANCHOR BOLT (WORK WITH
CORDLESS DRILL)
DRILL BIT (WORK WITH ANCHOR BOLT / CORDLESS
DRILL)
TAPE MEASURE
LASER LEVEL
4FT LEVEL (OPTIONAL WHEN WITHOUT LASER LEVEL)
2 LADDERS
SCISSORS
HC-4827329
M6X40 SET-SCREW
TH-4896295
ALLEN KEY SET
DAK PROVIDE CUSTOMER PROVIDE
HC-4084277 M8X50 SOCKET HEAD SCREW
0M-4671476 CABINET FLATNESS JIG
HC-1855 M6X16 SOCKET HEAD SCREW
HC-4827328 M8X15 COUNTERSUNK SOCKET HEAD SCREW
TH-4896295 M6 (5#) ALLEN KEY
MOUNTING ANCHOR BOLT
CORDLESS DRILL
DRILL BIT (WORK WITH ANCHOR BOLT / CORDLESS DRILL )
TAPE MEASURER
4FT LEVEL
(OPTIONAL WHEN WITHOUT LASER LEVEL)
INSTALL PARTS AND TOOLS
0A-2238-9999 MODULE TOOL (INSTALL AND REMOVAL)
TH-4176465 MODULE ADJUSTMENT TOOL
TH-4896293 PHILLIPS SCREW DRIVER
TH-4964504 GLOVE
2 LADDERS
LASER LEVEL
W-4137608 POWER INPUT CABLE
SOCKET FOR ANCHOR BOLT (WORK WITH CORDLESS DRILL)
SLD 220"
INSTALLATION MANUAL
HC-4827329 M6X40 JACK PIN
HC-4305316 M4X10 COUNTERSUNK PHILLIPS SCREW
0M-4685011 POWER BOX LINK PLATE
0M-5018247
MODULE ADJUSTMENT KEY

SLD 110" Installation Manual
DD5065833
Rev 01
01 November 2022
201 Daktronics Drive
Brookings, SD 57006-5128
www.daktronics.com/support
800.325.8766
Page 4 of 27
2
LASER LEVEL
2 LADDERS
CORDLESS DRILL
DRILLING
DRILL BIT
(WORK WITH ANCHOR BOLT
/ CORDLESS DRILL )
DRILLNG
Part A: Upper Beam Installation
Step 1: Location
TAPE MEASURE
1 LADDER
LASER LEVEL
LASER PLUMB LINE
(UPPER BEAM LOCATION)
REFER TO DWG-4945693 FOR RECOMMENDED UPPER BEAM LOCATION.

SLD 110" Installation Manual
DD5065833
Rev 01
01 November 2022
201 Daktronics Drive
Brookings, SD 57006-5128
www.daktronics.com/support
800.325.8766
Page 5 of 27
Part A: Upper Beam Installation
Step 2: Drilling
800
117
2202
1519
2452
1220
CL
CORDLESS DRILL
DRILL BIT
LASER LEVEL
2 LADDERS
DRILLING
COUNTERSUNK HOLES
FACING OUTWARD

SLD 110" Installation Manual
DD5065833
Rev 01
01 November 2022
201 Daktronics Drive
Brookings, SD 57006-5128
www.daktronics.com/support
800.325.8766
Page 6 of 27
Part A: Upper Beam Installation
Step 3: Mounting And Adjustment
DIM
DIM
DIM
DIM
DIM
DIM
DIM
MOUNTING
ADJUSTMENT
CORDLESS DRILL
LASER LEVEL
2 LADDERS
MOUNTING
ANCHOR BOLT
SOCKET FOR
ANCHOR BOLT
4FT LEVEL
HC-4827329
M6X40 SET-SCREW
TH-4896295
ALLEN KEY SET
M6 (5#)
DAK PROVIDE CUSTOMER PROVIDE
HC-4084277 M8X50 SOCKET HEAD SCREW
0M-4671476 CABINET FLATNESS JIG
HC-1855 M6X16 SOCKET HEAD SCREW
HC-4827328 M8X15 COUNTERSUNK SOCKET HEAD SCREW
TH-4896295 M6 (5#) ALLEN KEY
MOUNTING ANCHOR BOLT
CORDLESS DRILL
DRILL BIT (WORK WITH ANCHOR BOLT / CORDLESS DRILL )
TAPE MEASURER
4FT LEVEL
(OPTIONAL WHEN WITHOUT LASER LEVEL)
INSTALL PARTS AND TOOLS
0A-2238-9999 MODULE TOOL (INSTALL AND REMOVAL)
TH-4176465 MODULE ADJUSTMENT TOOL
TH-4896293 PHILLIPS SCREW DRIVER
TH-4964504 GLOVE
2 LADDERS
LASER LEVEL
W-4137608 POWER INPUT CABLE
SOCKET FOR ANCHOR BOLT (WORK WITH CORDLESS DRILL)
SLD 220"
INSTALLATION MANUAL
HC-4827329 M6X40 JACK PIN
HC-4305316 M4X10 COUNTERSUNK PHILLIPS SCREW
0M-4685011 POWER BOX LINK PLATE

SLD 110" Installation Manual
DD5065833
Rev 01
01 November 2022
201 Daktronics Drive
Brookings, SD 57006-5128
www.daktronics.com/support
800.325.8766
Page 7 of 27
Part A: Upper Beam Installation
Step 4: Drilling And Mounting
DIM
DIM
DIM
DIM
DIM
DIM
DIM
CORDLESS DRILL
LASER LEVEL
MOUNTING
ANCHOR BOLT
SOCKET FOR
ANCHOR BOLT
4FT LEVEL
DRILL BIT
DRILLING
MOUNTING
1 LADDER
305mm
12" 305mm
12" 305mm
12" 305mm
12" 305mm
12"
305mm
12"

SLD 110" Installation Manual
DD5065833
Rev 01
01 November 2022
201 Daktronics Drive
Brookings, SD 57006-5128
www.daktronics.com/support
800.325.8766
Page 8 of 27
Part B: Cabinets Installation
Step 5: Hang Cabinets
M
I
D
D
L
E
LOCATION LABEL

SLD 110" Installation Manual
DD5065833
Rev 01
01 November 2022
201 Daktronics Drive
Brookings, SD 57006-5128
www.daktronics.com/support
800.325.8766
Page 9 of 27
Part B: Cabinets Installation
Step 6: Slide In 1st Middle Column
M
I
D
D
L
E
REAR VIEW

SLD 110" Installation Manual
DD5065833
Rev 01
01 November 2022
201 Daktronics Drive
Brookings, SD 57006-5128
www.daktronics.com/support
800.325.8766
Page 10 of 27
R
I
G
H
T
Part B: Cabinets Installation
Step 7: Slide In Remaining Columns
R
I
G
H
T
a) Slide In Additional
Middle Column
b) Slide In Right Column
LOCATION LABEL
L
E
F
T
LOCATION LABEL
c) Slide In Left Column

SLD 110" Installation Manual
DD5065833
Rev 01
01 November 2022
201 Daktronics Drive
Brookings, SD 57006-5128
www.daktronics.com/support
800.325.8766
Page 11 of 27
Part B: Cabinets Installation
Step 8: Flatten
L
E
F
T
INSTALL JIG1 AND JIG2
JIG1
JIG2
1 LADDER
HC-4084277
M8X50 SOCKET
HEAD BOLT
0M-4671476
CABINET
FLATNESS JIG
TH-4896295
ALLEN KEY SET
M8 (6#)

SLD 110" Installation Manual
DD5065833
Rev 01
01 November 2022
201 Daktronics Drive
Brookings, SD 57006-5128
www.daktronics.com/support
800.325.8766
Page 12 of 27
Part B: Cabinets Installation
Step 9: Align Cabinets
1 LADDER
JIG1
JIG2
JIG1
JIG2
TH-4896295
ALLEN KEY SET
M6 (5#)
HC-1855
M6X16 SOCKET
HEAD BOLT

SLD 110" Installation Manual
DD5065833
Rev 01
01 November 2022
201 Daktronics Drive
Brookings, SD 57006-5128
www.daktronics.com/support
800.325.8766
Page 13 of 27
Part B: Cabinets Installation
Step 10: Flatten
1 LADDER
JIG2
JIG3
REMOVE JIG1 TO
INSTALL JIG3
HC-4084277
M8X50 SOCKET
HEAD BOLT
0M-4671476
CABINET
FLATNESS JIG
TH-4896295
ALLEN KEY SET
M8 (6#)

SLD 110" Installation Manual
DD5065833
Rev 01
01 November 2022
201 Daktronics Drive
Brookings, SD 57006-5128
www.daktronics.com/support
800.325.8766
Page 14 of 27
Part B: Cabinets Installation
Step 11: Align Cabinets
1 LADDER
JIG2
JIG3
HC-1855
M6X16 SOCKET
HEAD BOLT
JIG2
JIG3
TH-4896295
ALLEN KEY SET
M6 (5#)

SLD 110" Installation Manual
DD5065833
Rev 01
01 November 2022
201 Daktronics Drive
Brookings, SD 57006-5128
www.daktronics.com/support
800.325.8766
Page 15 of 27
Part B: Cabinets Installation
Step 12: Repeat Steps 8-11
J2
J3
FINISH ALL COLUMNS FIXATION IN THE SEQUENCE OF C1-C3
C2
C1
C3
1 LADDER
HC-4084277
M8X50 SOCKET
HEAD BOLT
0M-4671476
CABINET
FLATNESS JIG
HC-1855
M6X16 SOCKET
HEAD BOLT
TH-4896295
ALLEN KEY SET
M6 (5#) & M8 (6#)

SLD 110" Installation Manual
DD5065833
Rev 01
01 November 2022
201 Daktronics Drive
Brookings, SD 57006-5128
www.daktronics.com/support
800.325.8766
Page 16 of 27
Part B: Cabinets Installation
Step 13: Flatness Adjustment
FINISH ALL COLUMNS TOP FIXATION IN THE SEQUENCE OF C1-C5
C2
C1
C3
C4
C5
TH-4896295
ALLEN KEY SET
M8 (6#) & M4 (3#)

SLD 110" Installation Manual
DD5065833
Rev 01
01 November 2022
201 Daktronics Drive
Brookings, SD 57006-5128
www.daktronics.com/support
800.325.8766
Page 17 of 27
Part C: Bottom Beam Installation
Step 14: Slide In

SLD 110" Installation Manual
DD5065833
Rev 01
01 November 2022
201 Daktronics Drive
Brookings, SD 57006-5128
www.daktronics.com/support
800.325.8766
Page 18 of 27
Part C: Bottom Beam Installation
Step 15: Drilling And Mounting
CORDLESS DRILL
MOUNTING
ANCHOR BOLT
SOCKET FOR
ANCHOR BOLT
DRILL BIT MOUNTING
DRILLING
BOTTOM VIEW
305mm
12" 305mm
12" 305mm
12" 305mm
12"
305mm
12" 305mm
12"

SLD 110" Installation Manual
DD5065833
Rev 01
01 November 2022
201 Daktronics Drive
Brookings, SD 57006-5128
www.daktronics.com/support
800.325.8766
Page 19 of 27
Part C: Bottom Beam Installation
Step 16: Flatness Adjustment
FINISH ALL COLUMNS BOTTOM FIXATION IN THE SEQUENCE OF C1-C5
C2
C1
C3
C4
C5
TH-4896295
ALLEN KEY SET
M8 (6#) & M4 (3#)

SLD 110" Installation Manual
DD5065833
Rev 01
01 November 2022
201 Daktronics Drive
Brookings, SD 57006-5128
www.daktronics.com/support
800.325.8766
Page 20 of 27
Part D: Power Box Installation
Step 17: Connecting
W-4137608
POWER INPUT
CABLE
REAR VIEW