dallmeier SMAVIA DMS 2400 II User manual

005992 / 1.0.0 / 2016-04-27
DMS 2400 II
Commissioning
English

Copyright © 2016 Dallmeier electronic GmbH & Co.KG
The reproducon, distribuon and ulizaon of this document as well as the communicaon of its
contents to others without express authorizaon is prohibited. Oenders will be held liable for the
payment of damages. All rights reserved in the event of the grant of a patent, ulity model or design.
We reserve the right to make technical modicaons.
The manufacturer accepts no liability for damage to property or pecuniary damages arising due to
minor defects of the product or documentaon, e.g. print or spelling errors, and for those not caused
by intenon or gross negligence of the manufacturer.
Dallmeier electronic GmbH & Co.KG
Cranachweg 1
93051 Regensburg, Germany
www.dallmeier.com
[e-mail]
All trademarks idened by ® are registered trademarks of Dallmeier electronic.
Third-party trademarks are named for informaon purposes only.
Dallmeier electronic respects the intellectual property of third pares and always aempts to ensure
the complete idencaon of third-party trademarks and indicaon of the respecve holder of rights.
In case that protected rights are not indicated separately, this circumstance is no reason to assume that
the respecve trademark is unprotected.

8×
1×
1×
5×
2×
5×
1×

DMS 2400 II
www.dallmeier.com 5
Inhalt
1 Validity 6
2 Documents 6
This Document 7
Other Applicable Documents 7
3 TypographicalConvenons 8
4 SafetyInstrucons 10
5 General Notes 13
Scope of Delivery 13
Transportaon and Packaging 14
Warranty 14
Appropriate Use 14
Approvals/Cercaons 15
Note (USA) 15
6 Requirements 16
7 Installaon 18
8 HDDMounng 19
9 Indicators 22
10 Connecons 24
11 Commissioning and Local Login 26
Commissioning 26
Login 26
12 CommissioningandRemoteLogin 28
Commissioning 28
Login 28
13 Specicaons 30
14 Maintenance 32

DMS 2400 II
6www.dallmeier.com
1 Validity
This document applies to the SMAVIA Appliance DMS 2400 II.
Figures in this document may dier from the actual product.
2 Documents
The product documentaon contains several documents which are
included in the scope of delivery in a printed form and/or on a digital
medium.
Read all documents included in the scope of delivery carefully and thor-
oughly before using the device.
Always follow the contained instrucons, notes and warnings and ob-
serve the technical specicaons.
Keep all documents in legible condion and in a suitable locaon for
future reference.
Regularly check the website www.dallmeier.com for the latest updates on
product documentaon.

DMS 2400 II
www.dallmeier.com 7
This Document
Commissioning
The document “Commissioning” (this document) contains detailed de-
scripons on installaon, connecon and commissioning of the device as
well as safety instrucons and general notes.
The target audience of this document is trained system integrators.
Other Applicable Documents
Data Sheet
The document “Data Sheet” contains detailed technical specicaons,
features and characteriscs of the device.
The target audience of the document is trained system integrators.
Conguraon
The document “Conguraon” contains detailed descripons on the con-
guraon of the device.
The target audience of the document is trained system integrators.

DMS 2400 II
8www.dallmeier.com
3 TypographicalConvenons
This document may contain various warning words and symbols that
indicate potenal sources of danger:
DANGER
DANGER indicates a hazardous situaon which, if not avoided, will
result in death or serious injury.
WARNING
WARNING indicates a hazardous situaon which, if not avoided, could
result in death or serious injury.
CAUTION
CAUTION indicates a hazardous situaon which, if not avoided, could
result in minor or moderate injury.
NOTICE
NOTICE is used to address pracces not related to physical injury.

DMS 2400 II
www.dallmeier.com 9
For reasons of clarity and readability, various text formang elements
and types of emphasis are used in this documentaon:
Instrucons are indicated by arrows (➡).
Expressions in bold and italic marks generally indicate a control element
on the device (switches or labels) or on its user interface (buons, menu
items).
Paragraphs in italics provide informaon on basic principles, special
features and ecient procedures as well as general recommenda-
ons.

DMS 2400 II
10 www.dallmeier.com
4 SafetyInstrucons
Only use the device if it is technically in proper working condion and for
the intended purpose while keeping safety and potenal dangers in mind.
QualiedPersonnel
The installaon, mounng, connecon, commissioning and conguraon
of the device may only be carried out by qualied personnel.
This also applies to the maintenance, tesng and repair, whereat the reg-
ulaons of the DIN VDE 0701 series of standards (repair, modicaon and
inspecon of electrical appliances) must be followed.
Regulaons
The use of video and audio surveillance systems is, in general, strictly
regulated.
Inform yourself about the currently valid laws and regulaons regarding
data, worker and environmental protecon before using the device and
ensure compliance with them.
System Components
Only use internal components that have been tested and approved by
Dallmeier.
Inappropriate internal components may cause malfuncons, damages
and data loss and may result in the loss of warranty.
Modicaons
Do not make any modicaons to the hardware or soware that have not
been tested and approved by Dallmeier.
Inappropriate modicaons may cause malfuncons, damages and data
loss and may result in the loss of warranty.

DMS 2400 II
www.dallmeier.com 11
Documentaon
The product documentaon contains several documents which are
included in the scope of delivery in a printed form and/or on a digital
medium.
Read the documents included in the delivery carefully and thoroughly.
Always follow the contained instrucons, notes and warnings and ob-
serve the technical specicaons in the product data sheet.
Keep all documents in legible condion and in a suitable locaon for
future reference.
Regularly check the website www.dallmeier.com for the latest updates on
product documentaon.
CondensaonWater
If the device is brought from a cold to a warm environment, resulng con-
densaon water may cause malfuncons and damages.
In this case, wait (up to 8 hours) unl the device has reached room tem-
perature before commissioning.
Earthing&EquipotenalBonding
For the safety of persons (protecon against dangerous contact voltages)
and devices (protecon against over-voltages) as well as for the immunity
of informaon and communicaon technology equipment to electromag-
nec interferences (EMI), all protecve measures, which are specied
by the currently valid DIN, VDE and ISO standards and which provide for
a standard-compliant earthing and a correct equipotenal bonding of
electrical and electronic devices, are mandatory and must be fullled by
all means.
Lightning Storms
To avoid damage to the device by electrical surge during lightning storms,
all protecve measures, which are specied by the currently valid DIN,
VDE and ISO standards and which provide for a standard-compliant
lightning protecon equipotenal bonding, are mandatory and must be
fullled by all means.

DMS 2400 II
12 www.dallmeier.com
OperangCondions
Unfavorable operang condions may shorten the life of the device and
may cause malfuncons, damages and data loss and may result in the
loss of warranty.
Observe the specicaons given in the technical data, the operang con-
dion requirements and the maintenance instrucons.
ForeignBodies
If objects or liquids get into the device, immediately disconnect it from
the power supply (pull out the power plug).
Contact the sales partner responsible for your area.
BurntSmell
If you noce burnt smell or a formaon of smoke coming from the
device, immediately disconnect it from the power supply (pull out the
power plug).
Contact the sales partner responsible for your area.
Shocks
Shocks can cause malfuncons and damages. The unit may not be moved
while in operaon.
Opening
The device may only be opened by qualied personnel for commission-
ing, inspecon, maintenance and repair.
Disposal
Do not dispose waste electrical and electronic equipment into the house-
hold trash. Disconnect the device from the power supply. Remove all
connected devices. Return the device to your respecve sales partner.

DMS 2400 II
www.dallmeier.com 13
5 General Notes
Scope of Delivery
Included in the standard scope of delivery is:
• 1× SMAVIA Appliance DMS 2400 II
• 1× Mouse
• 5× Filter pad
• 8× Hard drive mounng screw (six-lobe, 6-32 UNC × 5/32")
• 2× Key for HDD tray cam lock
• 1× Power cord (IEC 60320 C-13 connector to European plug)
• 1× Weidmüller plug-in connector BL 3.50/10/180 SN OR
• 5× Weidmüller plug-in connector BL 3.50/08/180 SN OR
• 2× D-Sub plug 9 pins
• 1× Documentaons (printed and on DVD-ROM)
The scope of delivery may dier depending on the ordered equip-
ment, device variant or country of desnaon.
The funconal range of the device depends on the ordered equip-
ment or device variant and may dier from this document’s content.
Certain funcons and features may require the purchase of an addi-
onal license.

DMS 2400 II
14 www.dallmeier.com
TransportaonandPackaging
Store the original packaging for later transportaon.
Dallmeier is not responsible for any damage resulng from unprofession-
al/improper transportaon.
The device should only be shipped in the original packaging.
If the original packaging is no longer available, ensure that the used pack-
aging suciently protects the device against damage, moisture, heat and
cold.
Warranty
The terms and condions valid at me the contract was signed shall apply.
AppropriateUse
The DMS 2400 II is a high-performance appliance with a processing
capacity for up to 24 IP video channels. In conjuncon with the dedicated
soware SMAVIA Recording Server, it is the ideal and cascadable IP secu-
rity soluon e. g. for retail stores, gas staons or company premises.

DMS 2400 II
www.dallmeier.com 15
Approvals/Cercaons
The following approvals/cercaons were valid for the device at the
me of this document’s compilaon:
• CE
• FCC
• ACA
• UL
• DIN 50130-4 compliant
Visit www.dallmeier.com for possible updates.
Note(USA)
This equipment has been tested and found to comply with the limits for
a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protecon against harmful interfer-
ence when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and,
if not installed and used in accordance with the instrucon manual, may
cause harmful interference to radio communicaons. Operaon of this
equipment in a residenal area is likely to cause harmful interference
in which case the user will be required to correct the interference at his
own expense.

DMS 2400 II
16 www.dallmeier.com
6 Requirements
General
The device is designed for stand-alone operaon.
➡Install the device at a place with limited access (device or server
room).
Unfavorable ambient condions can shorten the life and cause
malfuncons or damages.
➡Do not operate the device at places with:
• large scale dust and dirt
• steam or oil vapours (e.g. kitchen)
• unsuitable ambient temperatures
• insucient venlaon (e.g. closed cabinet)
• direct sunlight
• sources of strong heat dissipaon (e.g. radiator)
• sources of strong radiaon (e.g. radio transmier, magnec eld)
• corrosive surrounding (e.g. gas, salt water)
PowerSupply
➡Operate the device with 100/240 V AC, 50/60 Hz.
➡Use an uninterrupble power supply (UPS) to protect the device from
voltage spikes and to keep it in operaon in case of power failure.
NOTICE
Prevenonofseparaonfromthecircuit
The plug of the supply line serves as separator from the supply circuit.
➡Use an outlet installed close to the device.
➡Make sure the outlet is easily accessible.

DMS 2400 II
www.dallmeier.com 17
Installaonina19''Rack
As an opon, the device may be installed and operated in a standard 19''
rack with acve venlaon.
RackInstallaon
➡Ensure a free space of at least 60 cm at the front of the rack in order
to be able to fully open the door.
➡Ensure a free space of at least 75 cm at the rear of the rack in order to
enable sucient air circulaon and access for maintenance.
➡Install the rack at a place with limited access (device or server room).
➡Ensure that the rack is installed in a stable way and is suitable to with-
stand the weight of the mounted devices.
DeviceInstallaon
➡Install heavy devices at the boom of the rack.
➡Note that the temperature in the top of the rack can be higher than
at the boom.
➡Plan a distance between the devices in order to allow a beer air
circulaon.
➡Ensure a sucient air circulaon by a free space of 10 cm at the front
and rear side of the device.
OperaonintheRack
➡Keep the doors of the rack closed in order to ensure a sucient air
circulaon.
SecureEarthing
➡Ensure anyme a proper grounding, preferably through a direct
grounding of the rack.

DMS 2400 II
18 www.dallmeier.com
7 Installaon
The installaon and commissioning of the device may only be carried out
by qualied personnel.
Dimensions
446 mm
(17.6")
425 mm
(16.7")
122 mm
(4.8")
Posioning
➡Ensure a stable and horizontal surface.
➡Ensure 10 cm (4'') of free space at the front, rear and right side.
➡Ensure that the venlaon slots are not covered.

DMS 2400 II
www.dallmeier.com 19
8 HDDMounng
The following tools are needed for the mounng of the hard drives:
• Star screwdriver (T10)
Note that all mounted hard disk drives
• have to be tested and released for mounng by Dallmeier
(see HDD whitelist at www.dallmeier.com).
• may not be formaed or paroned.
• should have the same capacity (number of sectors).
• should be from the same producon series with idencal rmware.
NOTICE
Riskofdamages
➡Ensure that the device is disconnected from the mains supply.
➡Start with the mounng of the hard drive in the HDD bay 1
(front side, top).
➡Mount the hard drives in a sequenally.
➡Unlock the HDD tray with the key.
➡Pull the HDD tray carefully out of the bay.
➡Remove the cover panel mounted on the HDD tray.

DMS 2400 II
20 www.dallmeier.com
➡Place the HDD tray on the boom side of the HDD.
➡Ensure that the connecons of the HDD are posioned at the rear
side of the HDD tray.
➡Ensure that HDD and HDD tray are ush at the rear side.
➡Mount the HDD tray on the HDD with 4 screws.
➡Place the HDD tray into the guidance rail.