danalock Danabridge V3 User manual

Danabridge V3
www.danalock.com

2

3
A

4

5
B

6

7
guide.danalock.com
The following instructions are in english. Localized versions can be
found with the QR-code below.

8
Add the Danabridge V3 in the Danalock App
Open the Danalock App and add the Danabridge by selecting ”Add
device” in the menu tab. When the Danabridge has been enrolled
you can pair it with your Danalock V3.
Go to:
Menu > My Accessory Devices > [Danabridge name] > Pairing
Select the lock you want to control with the Danabridge V3.
Connect the Danabridge V3 to wi
Go to:
Menu > My Accessory Devices > [Danabridge name] > Wi
Select your access point and enter the credentials. The Danabidge
V3 is ready for use when it has connected successfully.

9
LED signal LED color Status indication
Long white blink Power on
Constant red light Danabridge oine
Yellow blinking Danabridge is not congured
Red blinking Danabridge no server connection
Green blinking Communication in progress
Constant blue light Conguring Danabridge
Constant purple light Firmware is being updated
Constant green light Danabridge online
LED-Signals
The Danabridge V3 indicates the status of several operations with
dierent colors:
Operation Input action LED response
Clear access point and settings 10 button clicks Long red blink
Click commands

10
Firmware upgrade
Go to:
Menu > My Accessory Devices > [Danabridge name] > Firmware
and press ”Upgrade rmware”. Make sure to keep your phone near
the Danabridge V3 during the entire rmware upgrade process.

www.danalock.com
Danalock International ApS
Gammel Stillingvej 427C
8462 Harlev, DK
[phone]
[email protected]
BRIDGEV3-EN-2019/04/05