danalock Danabridge V3 Operating and maintenance manual

My accessory devices
– Danabridge V3
Visit our website for more information about
Danalock products and product guides
www.danalock.com
17/01/2020

The Danalock app
The Danalock app is used as main control for all Danalock products*.
Go to App Store or Google Play to download the app.
https://play.google.com/store/apps/details?id=dk.polycontrol.ekey
Google Play
https://itunes.apple.com/dk/app/danalock/id768685462
App Store
*The Danalock V3 HomeKit smart lock and its features is controlled by Apple’s HomeKit app.

Contents
My accessory devices 4
Danabridge V3 5
Add to the Danalock app 6
Settings 7
LED signals 13
Delete 14
Reset settings 15

Page 4 | Danabridge V3 app guide
My accessory devices
The functionality of your Danalock V3 can be extended by
installing accessory devices. You can nd all your currently
connected accessory devices by going to MENU > MY
ACCESSORY DEVICES.
You can add new accessory devices in the same way as other
Danalock devices by going to MENU > ADD DEVICE.

Page 5 | Danabridge V3 app guide
Danabridge V3
Connect your Danalock V3 smart lock to the Danabridge V3 and
control and operate your Danalock from anywhere. Enjoy the
added convenience of letting family members, friends and home
service providers in – even when you’re not at home.
Make sure your Danalock app and
Danalock V3 rmware are up to date
before continuing setup

Page 6 | Danabridge V3 app guide
Add to the Danalock app
Plug the Danabridge V3 into a power outlet. The Danabridge
V3 LED light shows a white color followed by a yellow blinking
(more about LED, page 13). Open Danalock App.
Press MENU > ADD NEW DEVICE. Add the Danabridge V3 by
locating it on the list. Now press the Danabridge ID.
The Danabridge V3 must be placed
within Bluetooth range of the
Danalock V3 (max 5-10 meters)

Page 7 | Danabridge V3 app guide
Settings
To change Danabridge V3 settings you must be within Bluetooth range of
the device. To pair the enrolled Danabridge V3 or change its settings you
go to: MENU > MY ACCESSORY DEVICES. Choose the Danabridge V3 from
the list to view device information.
To change the settings of your Danabridge V3 you need to be within
Bluetooth range of Danabridge V3 and Danalock V3.

Page 8 | Danabridge V3 app guide
Settings
Connect to Wi-Fi
The Danabridge V3 must be connected to your Wi-Fi before you
can access your Danalock V3 remotely.
To connect the Danabridge V3 to your Wi-Fi, press the WI-FI
option. Choose a Wi-Fi connection and ll out the required elds.
The LED will light up in several colors ending up as green,
indicating the Danabridge V3 is online.
If the color is red the connection failed. Try again and make sure you have
entered the proper password

Page 9 | Danabridge V3 app guide
Settings
Firmware update
Danalock will occasionally release new rmware updates for the
Danabridge V3. You can check if your Danabridge V3 has the
latest version installed by pressing FIRMWARE UPGRADE.
It is important you keep your phone near the Danabridge V3
during the rmware update process.

Page 10 | Danabridge V3 app guide
Settings
Rename
If you have several devices added to your account, naming a
device makes it easier to locate the correct one. You can also
use the serial number of the device to identify it.

Page 11 | Danabridge V3 app guide
Settings
Pair device
You can pair the Danabridge V3 with up to two devices.
When inside device settings for Danabridge V3 press BRIDGE
CONNECTIONS to pair or unpair with another device. You’ll see
a list of paired devices and unpaired devices. Locate the desired
Danalock V3 device and press it to pair. If pairing is successful,
the Danalock V3 will be present in the paired devices section.

Page 12 | Danabridge V3 app guide
Settings
Keychain visibility and operation
When you have paired the Danabridge V3 with a Danalock V3,
the bridge connection is illustrated in the keychain as a blue
circle around the lock icon.
To prevent pocket unlocking, the app will ask you to verify lock
operation when operating the lock remotely.
Lock status is showing as Unknown in the Danalock app when you are out of
Bluetooth reach of the Danalock V3.
To check the status of the lock: Swipe to the bridged lock in the keychain
(Danalock app) and press the lock status icon.

Page 13 | Danabridge V3 app guide
LED signals
The Danabridge V3 has an LED light embedded. The LED signals
will show you the status of your Danabridge V3.
LED signal LED color Status indication
Long white blink Power on
Constant red light Danabridge oine
Yellow blinking Danabridge is not congured
Red blinking Danabridge no server connection
Green blinking Communication in progress
Constant blue light Conguring Danabridge
Constant purple light Firmware is being updated
Constant green light Danabridge online

Page 14 | Danabridge V3 app guide
Delete
To delete the device from your account start by unpairing it
from your Danalock device. In the accessory device settings list
press PAIRING > UNPAIR DEVICE. When the accessory device
has been unpaired press DELETE DEVICE.

Page 15 | Danabridge V3 app guide
Reset settings
To reset the Danabridge V3 settings you insert a small pin or
paper clip into the hole on the side of the Danabridge V3 and
press ten times. When the reset request is conrmed the LED
will blink red.

Visit our website for more
information about Danalock
products and product guides
www.danalock.com