Danby Dls060wdb Assembly instructions

OWNER’S USE AND CARE GUIDE

GUIDE D’UTILISATION ET D'ENTRETIEN

MODEL • MODÈLE

DANBY PRODUCTS LIMITED, ONTARIO, CANADA N1H 6Z9

DANBY PRODUCTS INC., FINDLAY, OHIO, USA 45840 2017.02.03

DLS060WDB

LAUNDRY STACKING KIT

KIT D’EMBALLAGE DE LAVERIE

CONTENTS *TABLE DES MATIÈRES

LAUNDRY STACKING KIT

Owner’s Use and Care Guide...........................................1 - 7

• Welcome

• Installation Instructions

• Troubleshooting

• Warranty

KIT D’EMBALLAGE DE LAVERIE

Guide d’utilisation et soin...............................................8 - 14

• Bienvenue

• Consignes d’installation

• Dépannage

• Garantie

1

Welcome

Welcome to the Danby family. We are proud of our quality products, and we believe in dependable service. We suggest

that you read this Owner’s Manual before plugging in your new appliance as it contains important operational information,

safety information, troubleshooting and maintenance tips to ensure the reliability and longevity of your appliance.

Visit www.Danby.com to access self-service tools, FAQs and much more. For additional assistance call 1-800-263-2629.

Note the information below; you will need this information to obtain service under warranty.

To receive service, you must provide the original receipt.

Model Number:

Serial Number:

Date of Purchase:

NEED HELP?

Before you call for service, here are a few things you can do to help

us serve you better:

Read this Owner’s Use and Care Guide:

It contains instructions to help you use and maintain your

appliance properly.

If you received a damaged appliance:

Immediately contact the retailer (or builder) that sold you the

appliance.

Save time and money:

Check the Troubleshooting section at the end of the guide before call-

ing. This section helps you solve common problems that may occur.

If you do need service, you can relax, knowing help is only a phone

call away.

1-800-26-

(1-800-263-2629)

2

Installation Instructions

COMPONENTS

Before beginning to assemble the laundry stacking kit, ensure that you have all parts listed below.

Part Code Description Quantity

A Bottom support frame 1

B Middle support frame 1

C Top shelf 1

D Rear leg (bottom section) 2

E Front / Rear leg (top section) 4

F Front leg (bottom section) 2

G Anti-Tip bracket (1 of 2) 2

H Anti-Tip bracket (2 of 2) 2

I Shelf / Frame support clips

Note: 28 required for install, 2 extra pieces supplied as spares 30

J Spanner wrench 1

K Nut (for Anti-Tip bracket assembly) 2

L Wall anchor 2

M Phillips head self-tapping screw 2

N Phillips head metal screw (for Anti-Tip bracket assembly) 2

3

Installation Instructions

DIMENSIONS

72.5 cm (28.6 inches)

55 cm (21.7 inches)

130 cm (51.2 inches)

48 cm (18.9 inches)

4

Installation Instructions

ASSEMBLY

The laundry stacking kit is designed to accommodate both top

loading or front loading washing machines. Please follow all

assembly instructions below.

Step 1: Assembling the legs

Assemble the front legs by screwing together both sections of the

front legs:

• Part E: Front / Rear leg (top section)

• Part F: Front leg (bottom section)

Assemble the rear legs by screwing together both sections of the

rear legs:

• Part E: Front / Rear leg (top section)

• Part D: Rear leg (bottom section)

Step 2: Assembling the bottom support frame

1. Lay Part A: bottom support frame on its back with each

side bar facing upwards.

2. Insert each of the rear legs into the holes at both rear

corners of the support frame.

3. Using Part I: shelf / frame support clips, insert the plastic

tapered clips into the appropriate grooves on each back leg.

4. Gently press the bottom support frame downward until it

covers the support clips on the back legs. The support frame

should click into place over the support clips.

5. Insert each of the front legs into the remaining corner holes

at the front of the support frame.

6. Using Part I: shelf / frame support clips, insert the plastic

tapered clips into the appropriate grooves on each front leg.

7. Gently press the bottom support frame downward until it

covers the support clips on the front legs. The support frame

should click into place over the support clips.

8. Place the stand upright and gently push down on each

corner to ensure the support frame is fully locked into

position.

5

Installation Instructions

Step 3: Assembling the middle support frame

The middle support frame must be installed to maintain

stability of the stacking kit.

1. Using Part I: shelf / frame support clips, insert the

plastic tapered clips into the appropriate grooves,

just above the connection where the top and bottom

sections of the legs screw together.

2. Align the corner holes of Part B: middle support

frame with the top of each leg and lower it into place

over the support clips.

3. Gently push down on each corner to ensure the

support frame is fully locked into position.

Step 4: Assembling the top shelf

1. Using Part I: shelf / frame support

clips, insert the plastic tapered clips

into the appropriate grooves at the

top of each leg.

2. Align the corner holes of Part C: top

shelf with the top of each leg and

lower it into place over the support

clips.

3. Gently push down on each corner to

ensure the top shelf is fully locked

into position.

Important note: If the support frames fall

down and does not catch on the support clips

correctly, ensure that the tapered edge of the

support clip is pointing downward. If the support

clips are installed upsidedown, the support

frames will not click into place correctly.

Important note: If the stacking kit

seems unstable or has a signiﬁcant

wobble, ensure that the support

frames are pushed down far enough

to click over the support clips.

6

Installation Instructions

Step 5: Installing the Anti-Tip safety bracket

1. Attach Part G: Anti-Tip bracket (1 of 2) and

Part H: Anti-Tip bracket (2 of 2) around Part

B: middle support frame as shown by joining

the two parts using Part N: Phillips head metal

screw and Part K: nut.

2. Align the assembled stacking kit in place against

the wall and mark where the Anti-Tip safety

bracket needs to be secured to the wall.

3. Use Part L: wall anchors and Part M: Phillips

head self-tapping screw to secure the

assembled stacking kit to the wall.

Step 6: Installing the dryer

1. Remove the four levelling legs from the dryer.

2. Place the dryer on the top shelf of the

stacking kit.

3. Re-install the four levelling legs through the

underside of the top shelf and tighten until

dryer is secured in place.

Important note: If the dryer seems

unstable or if there is signiﬁcant

motion or noise from the dryer when

it is in use, ensure that the levelling

legs are tightened to minimize

vibration and noise.

Important note: Ensure that

screws align with a wall stud to

ensure stacking kit stability.

LIMITED IN-HOME APPLIANCE WARRANTY

This quality product is warranted to be free from manufacturer’s defects in material and workmanship, provided that the unit is used under the normal operating

conditions intended by the manufacturer.

This warranty is available only to the person to whom the unit was originally sold by Danby Products Limited (Canada) or Danby Products Inc. (U.S.A.) (hereafter

“Danby”) or by an authorized distributor of Danby, and is non-transferable.

TERMS OF WARRANTY

Plastic parts, are warranted for thirty (30) days only from purchase date, with no extensions provided.

First Year

During the rst twelve (12) months, any functional parts of this product found to be defective, will be repaired or replaced, at warrantor’s

option, at no charge to the ORIGINAL purchaser.

To obtain

Danby reserves the right to limit the boundaries of “In Home Service” to the proximity of an Authorized Service Depot. Any app liance

Service

requiring service outside the limited boundaries of “In Home Service” , it will be the consumer’s responsibility to transport the appliance (at

their own expense) to the original retailer (point of purchase) or a service depot for repair. See “Boundaries of In Home Serv ice” below.

Contact your dealer from whom your unit was purchased, or contact your nearest authorized Danby service depot, where service

must be performed by a qualied service technician.

If service is performed on the units by anyone other than an authorized service depot, or the unit is used for commercial appli cation, all

obligations of Danby under this warranty shall be void.

Boundaries of

If the appliance is installed in a location that is 100 kilometers (62 miles) or more from the nearest service center your unit must be

In Home Service

delivered to the nearest authorized Danby Service Depot, as service must only be performed by a technician qualied and certif ied for

warranty service by Danby. Transportation charges to and from the service location are not protected by this warranty and are t he

responsibility of the purchaser.

Nothing within this warranty shall imply that Danby will be responsible or liable for any spoilage or damage to food or other c ontents of this appliance, whether due

to any defect of the appliance, or its use, whether proper or improper.

EXCLUSIONS

Save as herein provided, Danby, there are no other warranties, conditions, representations or guarantees, express or implied, m ade or intended by Danby or its

authorized distributors and all other warranties, conditions, representations or guarantees, including any warranties, conditio ns, representations or guarantees

under any Sale of Goods Act or like legislation or statue is hereby expressly excluded. Save as herein provided, Danby shall no t be responsible for any damages

to persons or property, including the unit itself, howsoever caused or any consequential damages arising from the malfunction o f the unit and by the purchase of

the unit, the purchaser does hereby agree to indemnify and hold harmless Danby from any claim for damages to persons or propert y caused by the unit.

GENERAL PROVISIONS

No warranty or insurance herein contained or set out shall apply when damage or repair is caused by any of the following:

1) Power failure.

2) Damage in transit or when moving the appliance.

3) Improper power supply such as low voltage, defective house wiring or inadequate fuses.

4) Accident, alteration, abuse or misuse of the appliance such as inadequate air circulation in the room or abnormal operating con ditions

(extremely high or low room temperature).

5) Use for commercial or industrial purposes (ie. If the appliance is not installed in a domestic residence).

6) Fire, water damage, theft, war, riot, hostility, acts of God such as hurricanes, oods etc.

7) Service calls resulting in customer education.

8) Improper Installation (ie. Building-in of a free standing appliance or using an appliance outdoors that is not approved for out door application).

Proof of purchase date will be required for warranty claims; so, please retain bills of sale. In the event warranty service is required, present this document to our

AUTHORIZED SERVICE DEPOT.

Danby Products Limited

PO Box 1778, Guelph, Ontario, Canada N1H 6Z9

Telephone: (519) 837-0920 FAX: (519) 837-0449

Danby Products Inc.

PO Box 669, Findlay, Ohio, U.S.A. 45840

Telephone: (419) 425-8627 FAX: (419) 425-8629

04/09

1-800-263-2629

Warranty Service

In-home

If the appliance is installed in a location that is 100 kilometers (62 miles) or more from the nearest

service center your unit must be delivered to the nearest authorized Danby Service Depot, as service

must only be performed by a technician qualified and certified for warranty service by Danby. Transpor-

tation charges to and from the service location are not protected by this warranty and are the responsi-

bility of the purchaser.

During the first twelve (12) months, any functional parts of this product found to be defective, will be

repaired or replaced, at warrantor’s option, at no charge to the ORIGINAL purchaser.

Danby reserves the right to limit the boundaries of “In Home Service” to the proximity of an Authorized

Service Depot. Any appliance requiring service outside the limited boundaries of “In Home Service” ,it

will be the consumer’s responsibility to transport the appliance (at their own expense) to the original

retailer (point of purchase) or a service depot for repair. See “Boundaries of In Home Service” below.

Contact your dealer from whom your unit was purchased, or contact your nearest authorized Danby

service depot, where service must be performed by a qualified service technician. If service is performed

on the units by anyone other than an authorized service depot, or the unit is used for commercial

application, all obligations of Danby under this warranty shall be void.

First 12 months

To obtain

service

Boundaries of

in-home service

LIMITED CARRY-IN APPLIANCE WARRANTY

This quality product is warranted to be free from manufacturer’s defects in material and workmanship, provided that the unit is

used under the normal operating conditions intended by the manufacturer.

This warranty is available only to the person to whom the unit was originally sold by Danby Products Limited (Canada) or

Danby Products Inc. (U.S.A.) (hereafter “Danby”) or by an authorized distributor of Danby, and is non-transferable.

TERMS OF WARRANTY

Plastic parts, are warranted for thirty (30) days only from purchase date, with no extensions provided.

Nothing within this warranty shall imply that Danby will be responsible or liable for any spoilage or damage to food or other

contents of this appliance, whether due to any defect of the appliance, or its use, whether proper or improper.

EXCLUSIONS

Save as herein provided, by Danby, there are no other warranties, conditions, representations or guarantees, express or

implied, made or intended by Danby or its authorized distributors and all other warranties, conditions, representations or

guarantees, including any warranties, conditions, representations or guarantees under any Sale of Goods Act or like legislation

or statute is hereby expressly excluded. Save as herein provided, Danby shall not be responsible for any damages to persons

or property, including the unit itself, howsoever caused or any consequential damages arising from the malfunction of the unit

and by the purchase of the unit, the purchaser does hereby agree to indemnify and hold harmless Danby from any claim for

damages to persons or property caused by the unit.

GENERAL PROVISIONS

No warranty or insurance herein contained or set out shall apply when damage or repair is caused by any of the following:

1) Power failure.

2) Damage in transit or when moving the appliance.

3) Improper power supply such as low voltage, defective house wiring or inadequate fuses.

4) Accident, alteration, abuse or misuse of the appliance such as inadequate air circulation in the room or abnormal operating

conditions (extremely high or low room temperature).

5) Use for commercial or industrial purposes (ie. If the appliance is not installed in a domestic residence).

6) Fire, water damage, theft, war, riot, hostility, acts of God such as hurricanes, floods etc.

7) Service calls resulting in customer education.

8) Improper Installation (ie. Building-in of a free standing appliance or using an appliance outdoors that is not approved for

outdoor application). Proof of purchase date will be required for warranty claims; so, please retain bills of sale. In the event

warranty service is required, present this document to our AUTHORIZED SERVICE DEPOT.

Warranty Service

Carry-In

Danby Products Limited

PO Box 1778, Guelph, Ontario, Canada N1H 6Z9

Telephone: (519) 837-0920 FAX: (519) 837-0449

Danby Products Inc.

PO Box 669, Findlay, Ohio, U.S.A. 45840

Telephone: (419) 425-8627 FAX: (419) 425-8629

1-800-263-2629

07/14

8

Bienvenue

Bienvenue dans la famille Danby. Nous sommes fiers de la qualité de nos produits et nous croyons en le service fiable.

Nous vous suggérons de lire ce manuel d’utilisation avant de brancher vontre nouvel appareil car il contient des informations

importantes sur l’utilisation, la sécurité, le dépannage at la maintenance, afin d’assurer la fiabilité at la longévité de votre

appareil. Visitez www.Danby.com pour accéder aux outils d’autoservice, aux FAQ et bien plus encore. Pour obtenir de l’aide

supplémentaire, composez le 1-800-263-2629.

Veuillez noter les informations ci-dessous; ces renseignements seront nécessaires si votre appareil a besoin

d’entretien ou pour les demandes de renseignements généraux. Pour bénéficier d’une opération de mainte-

nance ou de dépannage, le reçu original sera exigé.

Numéro de modèle :

Numéro de serie :

Date d’achat :

BESOIN D’ASSISTANCE ?

Veuillez trouver quelques conseils avant de faire appel à nos

services, cela nous aidera à mieux vous servir :

Lisez ce guide :

Il comprend des instructions pour l’utilisation et l’entretien

adapté de votre appareil.

Si votre nouvel appareil est endommagé :

Contactez immédiatement le revendeur (ou le fabricant).

Gagnez du temps et de l’argent :

Avant de faire appel à nos services, consultez à nouveau

la section « Dépannage ». Cette section vous aidera à

résoudre des problèmes courants.

Si une réparation est nécessaire, ne vous inquiétez pas, la

solution est au bout du fil.

1-800-26-

(1-800-263-2629)

9

COMPOSANTS

Avant de commencer à assembler le kit d’empilage de linge, assurez-vous que toutes les pièces sont

indiquées ci-dessous.

Code de

pièce Description Quantité

A Cadre de support inférieur 1

B Cadre de support intermédiaire 1

C Étagère supérieure 1

D Jambe arrière (partie inférieure) 2

E Jambe avant / arrière (section supérieure) 4

F Jambe avant (partie inférieure) 2

G Support anti-basculement (partie 1 de 2) 2

H Support anti-basculement (partie 2 de 2) 2

I Étagère / cadre clips de support

Remarque: 28 nécessaire pour installer, 2 pièces supplémentaires

fournies comme pièces de rechange

30

J Clé à écrous 1

K Écrou (pour l’assemblage du support anti-basculement) 2

L Ancrage mural 2

M Vis auto-taraudeuse Phillips 2

N Vis à tête cylindrique Phillips (pour l’assemblage de support anti-

basculement) 2

Consignes d’installation

10

Consignes d’installation

DIMENSIONS

72.5 cm (28.6 pouces)

55 cm (21.7 pouces)

130 cm (51.2 pouces)

48 cm (18.9 pouces)

11

Consignes d’installation

Étape 2: Assemblage du cadre de support inférieur

1. Lay partie A: cadre de support inférieur sur le dos avec

chaque barre latérale orientée vers le haut.

2. Insérez chacune des pattes arrière dans les trous situés aux

deux coins arrière du cadre de support.

3. À l’aide de la partie I: clips de support d’étagère / cadre,

insérez les clips coniques en plastique dans les rainures

appropriées sur chaque pied arrière.

4. Appuyez doucement sur le cadre de support inférieur vers

le bas jusqu’à ce qu’il recouvre les clips de support sur les

pattes arrière. Le châssis de support doit se mettre en place

sur les clips de support.

5. Insérez chacune des pattes avant dans les trous d’angle

restants à l’avant du cadre de support.

6. En utilisant la partie I: clips de support de tablette /

cadre, insérez les clips coniques en plastique dans les

rainures appropriées sur chaque pied avant.

7. Appuyez doucement sur le cadre de support inférieur vers

le bas jusqu’à ce qu’il recouvre les clips de support sur les

pattes avant. Le châssis de support doit se mettre en place

sur les clips de support.

8. Placez le support debout et appuyez doucement sur

chaque coin pour s’assurer que le cadre de support est

complètement verrouillé en position.

ASSEMBLÉE

Le kit d’empilage de linge est conçu pour accueillir les machines à

laver à chargement frontal ou à chargement frontal. Veuillez suivre

toutes les instructions de montage ci-dessous.

Étape 1: Assemblage des jambes

Assembler les pieds avant en vissant ensemble les deux sections

des pattes avant:

• Partie E: Pied avant / arrière (section supérieure)

• Partie F: Pied avant (section inférieure)

Assembler les pieds arrière en vissant ensemble les deux sections

des pattes arrière:

• Partie E: Pied avant / arrière (section supérieure)

• Partie D: Pied arrière (section inférieure)

12

Consignes d’installation

Étape 3: Montage du cadre de support central

Le cadre de support central doit être installé pour

maintenir la stabilité du kit d’empilage.

1. En utilisant la partie I: clips de support de tablette /

cadre, insérez les clips coniques en plastique dans les

rainures appropriées, juste au-dessus de la connexion

où les sections supérieure et inférieure des jambes se

vissent ensemble.

2. Alignez les trous d’angle de la partie B: cadre de

support intermédiaire avec le haut de chaque pied et

abaissez-le en place sur les clips de support.

3. Appuyez doucement sur chaque coin pour s’assurer

que le cadre de support est bien verrouillé en position.

Étape 4: Montage de l’étagère

supérieure

1. À l’aide de la partie I: clips de

support de tablette / cadre, insérez

les clips coniques en plastique dans

les rainures appropriées au sommet

de chaque jambe.

2. Alignez les trous d’angle de la partie

C: plateau supérieur avec le haut

de chaque pied et abaissez-le en

place sur les clips de support.

3. Appuyez doucement sur chaque

coin pour s’assurer que l’étagère

supérieure est complètement

verrouillée en position.

Remarque importante: Si les cadres de support

tombent et ne s’accrochent pas correctement sur les

clips de support, assurez-vous que le bord conique de

la pince de support est dirigé vers le bas. Si les clips de

support sont installés à l’envers, les cadres de support

ne se mettront pas en place correctement.

Remarque importante: Si le kit

d’empilage semble instable ou a

une oscillation importante, assurez-

vous que les cadres de support sont

poussés sufﬁsamment bas pour

faire un clic sur les clips de support.

13

Consignes d’installation

Étape 5: Installation du support anti-basculement

1. Attachez la partie G: support anti-basculement

(1 sur 2) et partie H: support anti-basculement

(2 sur 2) autour de la partie B: cadre de support

central comme illustré par la jonction des deux

pièces à l’aide de la partie N: K: écrou.

2. Alignez le kit d’empilage assemblé en place contre

le mur et marquez où le support de sécurité anti-

basculement doit être ﬁxé au mur.

3. Utiliser la partie L: ancres murales et partie

M: vis auto-taraudeuse Phillips pour ﬁxer le kit

d’empilage assemblé au mur.

Étape 6: Installation de la sécheuse

1. Retirez les quatre pattes de mise à niveau de

la sécheuse.

2. Placez la sécheuse sur l’étagère supérieure

du kit d’empilage.

3. Réinstallez les quatre pieds de nivellement

à travers la face inférieure de l’étagère

supérieure et serrez jusqu’à ce que la

sécheuse soit bien ﬁxée.

Remarque importante: Si le

séchoir semble instable ou si

le sèche-linge présente des

mouvements ou des bruits

importants lors de l’utilisation,

veillez à ce que les pieds de

nivellement soient serrés pour

minimiser les vibrations et le bruit.

Remarque importante:

Assurez-vous que les vis sont

alignées avec un goujon mural

pour assurer la stabilité du kit

d’empilage.

LIMITED IN-HOME APPLIANCE WARRANTY

This quality product is warranted to be free from manufacturer’s defects in material and workmanship, provided that the unit is used under the normal operating

conditions intended by the manufacturer.

This warranty is available only to the person to whom the unit was originally sold by Danby Products Limited (Canada) or Danby Products Inc. (U.S.A.) (hereafter

“Danby”) or by an authorized distributor of Danby, and is non-transferable.

TERMS OF WARRANTY

Plastic parts, are warranted for thirty (30) days only from purchase date, with no extensions provided.

First Year

During the rst twelve (12) months, any functional parts of this product found to be defective, will be repaired or replaced, at warrantor’s

option, at no charge to the ORIGINAL purchaser.

To obtain

Danby reserves the right to limit the boundaries of “In Home Service” to the proximity of an Authorized Service Depot. Any app liance

Service

requiring service outside the limited boundaries of “In Home Service” , it will be the consumer’s responsibility to transport the appliance (at

their own expense) to the original retailer (point of purchase) or a service depot for repair. See “Boundaries of In Home Serv ice” below.

Contact your dealer from whom your unit was purchased, or contact your nearest authorized Danby service depot, where service

must be performed by a qualied service technician.

If service is performed on the units by anyone other than an authorized service depot, or the unit is used for commercial appli cation, all

obligations of Danby under this warranty shall be void.

Boundaries of

If the appliance is installed in a location that is 100 kilometers (62 miles) or more from the nearest service center your unit must be

In Home Service

delivered to the nearest authorized Danby Service Depot, as service must only be performed by a technician qualied and certif ied for

warranty service by Danby. Transportation charges to and from the service location are not protected by this warranty and are t he

responsibility of the purchaser.

Nothing within this warranty shall imply that Danby will be responsible or liable for any spoilage or damage to food or other c ontents of this appliance, whether due

to any defect of the appliance, or its use, whether proper or improper.

EXCLUSIONS

Save as herein provided, Danby, there are no other warranties, conditions, representations or guarantees, express or implied, m ade or intended by Danby or its

authorized distributors and all other warranties, conditions, representations or guarantees, including any warranties, conditio ns, representations or guarantees

under any Sale of Goods Act or like legislation or statue is hereby expressly excluded. Save as herein provided, Danby shall no t be responsible for any damages

to persons or property, including the unit itself, howsoever caused or any consequential damages arising from the malfunction o f the unit and by the purchase of

the unit, the purchaser does hereby agree to indemnify and hold harmless Danby from any claim for damages to persons or propert y caused by the unit.

GENERAL PROVISIONS

No warranty or insurance herein contained or set out shall apply when damage or repair is caused by any of the following:

1) Power failure.

2) Damage in transit or when moving the appliance.

3) Improper power supply such as low voltage, defective house wiring or inadequate fuses.

4) Accident, alteration, abuse or misuse of the appliance such as inadequate air circulation in the room or abnormal operating con ditions

(extremely high or low room temperature).

5) Use for commercial or industrial purposes (ie. If the appliance is not installed in a domestic residence).

6) Fire, water damage, theft, war, riot, hostility, acts of God such as hurricanes, oods etc.

7) Service calls resulting in customer education.

8) Improper Installation (ie. Building-in of a free standing appliance or using an appliance outdoors that is not approved for out door application).

Proof of purchase date will be required for warranty claims; so, please retain bills of sale. In the event warranty service is required, present this document to our

AUTHORIZED SERVICE DEPOT.

Danby Products Limited

PO Box 1778, Guelph, Ontario, Canada N1H 6Z9

Telephone: (519) 837-0920 FAX: (519) 837-0449

Danby Products Inc.

PO Box 669, Findlay, Ohio, U.S.A. 45840

Telephone: (419) 425-8627 FAX: (419) 425-8629

04/09

1-800-263-2629

Warranty Service

In-home

Si l'appareil est installé à plus de 100 kilomètres (62 milles) du centre de service le plus proche, il doit

être livré à l'atelier de réparation autorisé par Danby le plus proche, car l'entretien doit uniquement être

réalisé par un technicien qualifié et certifié pour effectuer un entretien couvert par la garantie de Danby.

Les frais de transport entre votre domicile et le lieu de l'entretien ne sont pas couverts par la présente

garantie et doivent être acquittés par l'acheteur.

Pendant les premiers douze (12) mois, toutes les pièces fonctionnelles de ce produit qui s’avèrent

défectueuses seront réparées ou remplacées, selon le choix du garant, sans frais à l’acheteur INITIAL.

Le client sera responsable pour le transport et tous les frais d’expédition de tout appareil exigeant le

service au dépot de service autorisé le plus proche. S’adresser au détaillant qui a vendu l’appareil, ou à

la station technique agréée de service la plus proche, où les réparations doivent être effectuées par un

technicien qualifié. Si les réparations sont effectuées par quiconque autre que la station de service

agréée où à des fins commerciales, toutes les obligations de Danby en vertu de cette garantie seront

annulées.

Premiers 12 mois

Pour bénéficier

du service

Limites de l’entre-

tien à domicile

GARANTIE LIMITÉE SUR

APPAREIL ÉLECTROMÉNAGER

Cet appareil de qualité est garanti exempt de tout vice de matière première et de fabrication, s’il est utilisé dans les conditions

normales recommandées par le fabricant.

Cette garantie n’est offerte qu’à l’acheteur initial de l’appareil vendu par Danby Products Limited (Canada) ou Danby Products

Inc. (E.- U.A.) (ci-après « Danby ») ou par l’un des ses distributeurs agréés et elle ne peut être transférée.

CONDITIONS

Les pièces en plastique sont garanties pendant trente (30) jours seulement à partir de la date de l’achat, sans aucune prolon-

gation prévue.

Aucune partie de la garantie ne prévoit implicitement que le fabricant sera tenu responsable des dommages subis par les

aliments ou d’autres types de contenu, qu’ils soient causés par la défectuosité de l’appareil ou par son usage adéquat ou

inadéquat.

EXCLUSIONS

En vertu de la présente, il n’existe aucune autre garantie, condition ou représentation, qu’elle soit exprimée ou tacite, de façon

manifeste ou intentionnelle, par Danby ou ses distributeurs agréés. De même, sont exclues toutes les autres garanties,

conditions ou représentations, y compris les garanties, conditions ou représentations en vertu de toute loi régissant la vente

de produits ou de toute autre législation ou règlement semblables. En vertu de la présente, Danby ne peut être tenue respons-

able en cas de blessures corporelles ou des dégâts matériels, y compris à l’appareil, quelle qu’en soit les causes. Danby ne

peut pas être tenue responsable des dommages indirects dus au fonctionnement défectueux de l’appareil. En achetant

l’appareil, l’acheteur accepte de mettre à couvert et de dégager Danby de toute responsabilité en cas de réclamation pour

toute blessure corporelle ou tout dégât matériel causé par cet appareil.

CONDITIONS GÉNÉRALES

La garantie ou assurance ci-dessus ne s’applique pas si les dégâts ou réparations sont dus aux cas suivants :

1) Panne de courant.

2) Dommage subis pendant le transport ou le déplacement de l’appareil.

3) Alimentation électrique incorrecte (tension faible, câblage défectueux, fusibles incorrects).

4) Accident, modification, emploi abusif ou incorrect de l’appareil tel qu'une circulation d'air inadéquate dans la pièce ou des

conditions de fonctionnement anormales (température extrêmement élevée ou basse).

5) Utilisation dans un but commercial ou industriel (à savoir, si l'appareil n'est pas installé dans un domicile résidentiel).

6) Incendie, dommages causés par l’eau, vol, guerre, émeute, hostilités, cas de force majeure (ouragan, inondation, etc.).

7) Visites d’un technicien pour expliquer le fonctionnement de l’appareil au propriétaire.

8) Installation inappropriée (par exemple, encastrement d'un appareil autoportant, ou utilisation extérieure d'un appareil non

conçu à cet effet). Une preuve d’achat doit être présentée pour toute demande de réparation sous garantie. Prière de garder

le reçu. Pour faire honorer la garantie, présenter ce document à la station technique agréée ou s’adresser à :

Service sous garantie

En atelier

Danby Products Limited

PO Box 1778, Guelph, Ontario, Canada N1H 6Z9

Téléphone : (519) 837-0920 Télécopieur: (519) 837-0449

Danby Products Inc.

PO Box 669, Findlay, Ohio, U.S.A. 45840

Téléphone: (419) 425-8627 Télécopieur: (419) 425-8629

1-800-263-2629

0714

NOTES / REMARQUES :

__________________________________________________________________________________________

NOTES / REMARQUES :

__________________________________________________________________________________________

NOTES / REMARQUES :

__________________________________________________________________________________________

All repair parts are available for purchase or special

order when you visit your nearest service depot. To

request service and/or the location of the service depot

nearest you, call the TOLL FREE number.

When requesting service or ordering parts, always pro-

vide the following information:

• Product Type

• Model Number

• Part Number

• Part Description

Toutes les pièces de rechange ou commandes spécia-

les sont disponibles à votre centre de service régional

autorisé. Pour obtenir le service et/ou la localité de

votre centre de service régional, signalez le NUMÉRO

D’APPEL SANS FRAIS.

Ayez les renseignements suivants à la portée de la main

lors de la commande de pièce ou service:

• Type de produit

• Numéro de modèle

• Numéro de pièce

• Description de la pièce

MODEL • MODÈLE

1-800-26-

(1-800-263-2629)

Printed in China

Imprimé en Chine

Danby Products Limited, Guelph, ON, Canada N1H 6Z9

Danby Products Inc., Findlay, Ohio, USA 45840

DLS060WDB

LAUNDRY STACKING KIT KIT D’EMBALLAGE DE LAVERIE

Danby DLS060WDB Assembly instructions

Popular Laundry Accessories manuals by other brands