D&R ELECTRONICS 901-0164B User manual
2020 Ulity Console with Sliding Armrest
901-0164B
(Images are Based o 901-0165B)
Content Page
Installaon Instrucons:
Step 1
Step 2
CAUTION: The lower dash
secon has wiring harnesses
that are a+ached.
Step 3
Step 4
CAUTION: DO NOT hammer or force the plasc covers. They have a pin
on each side, that must be pressed using a small flat-head screwdriver
when installing.
Step 5
Step 6
Step 7
Step 8
Step 9
Step 10
Step 11
WARRANTY
D & R Electronics warrants its new products to be free from defects in material and workmanship,
under normal use and service, for a period of one year on parts replacement, and one year on la-
bor.
This warranty applies only to original purchasers ac uiring the product directly from D&R Electron-
ics, or its authorized dealers. Warranty will not be recognized without proof of purchase or bill of
sale. This warranty is not transferable.
The warranty begins on the date of delivery to the first user/purchaser. This warranty shall not ap-
ply to products which must be repaired due to normal wear and tear, negligence, improper installa-
tion, abuse, misuse, or which have been
altered or modified at a facility other than D & R Electronics, or its authorized depot center. Units
proved to be defective within the warranty period, based on an examination by D&R Electronics,
will be replaced or repaired at D & R Electronics’ option. This warranty does not cover travel ex-
penses or labor charges for removal or installation. Lamps, flash tubes, batteries or other items
considered consumables are not covered under warranty.
This warranty is in lieu of all other express warranties. D&R Electronics makes no other warran-
PRODUCT RETURN POLICY
In order to provide you with faster service, product returns for repair or replacement, must have a
Return Goods Authorization Number (RGA number). Please contact our company to obtain a
RGA number before you return the product to D & R ELECTRONICS. Write the RGA number clearly
on the package. Be sure you use sufficient packing materials to avoid damage to the product being
returned while in transit.
D & R ELECTRONICS assumes no responsibility or liability for expenses incurred for the removal
and/or the installation of products re uiring service and/or repair. Repairing or replacing product is
at the
D&R ELECTRONICS Co. LTD.
CANADA USA
8820 George Bolton Pkwy. 22 Kenmore Ave
Building #3, Doors 11-14
Bolton, Ontario L7E 2Y4 Buffalo, NY, 14207
Tel.: ( 05) 51- 7 Toll Free 1-800-538-7338
Fax: ( 05) 51-001
www.dandrelectronics.com
Other D&R ELECTRONICS Industrial Equipment manuals
